# \[APP\]\[Pro\] EasyLighting - Make smart home easy **URL:** \ **Category:** Apps\ **Tags:** app, z-wave, zigbee\ **Created:** [July 6, 2022, 2:39am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588 "2022-07-06T02:39:51Z")\ **Posts on this page:** 20\ **Page:** 10
**Author:** ![niracler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niracler/32/120644_2.png) [@niracler](https://community.homey.app/u/niracler)\ **Post date:** [May 8, 2025, 2:16am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/184 "2025-05-08T02:16:37Z")
Hi, I need your help. Add this ZV device to the homey gateway, then in the advanced settings page of the device, find the manufacturer ID, product type ID and product ID and provide them to me. ---
**Author:** ![John\_Peckham](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/john_peckham/32/120805_2.png) [@John\_Peckham](https://community.homey.app/u/John_Peckham)\ **Post date:** [May 8, 2025, 1:37pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/185 "2025-05-08T13:37:34Z")
Thanks for the reply šŸ™‚ Here are the device details for the Sunricher RGBW LED controllers: Manufacturer ID: 816 Pproduct Type ID: 512 Product ID: 53250 The publicly available manual for the device (with all the Command Classes) can be found here: [https://www.sunricher.com/media/resources/manual/SR-ZV9101FA-RGBW%20Instruction%20V1.pdf](https://www.sunricher.com/media/resources/manual/SR-ZV9101FA-RGBW%20Instruction%20V1.pdf) ---
**Author:** ![niracler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niracler/32/120644_2.png) [@niracler](https://community.homey.app/u/niracler)\ **Post date:** [May 24, 2025, 6:54am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/186 "2025-05-24T06:54:55Z")
After my inspection, this device has already supported full RGB color control in Homey for several years. You should be able to use it if you install our app. ![CleanShot 2025-05-24 at 14.52.50@2x](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/f/ff09319a8bf77246ee8979f9246dac7c5b8ce9f5.jpeg) ---
**Author:** ![John\_Peckham](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/john_peckham/32/120805_2.png) [@John\_Peckham](https://community.homey.app/u/John_Peckham)\ **Post date:** [May 24, 2025, 10:10am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/187 "2025-05-24T10:10:47Z")
Many thanks for confirming šŸ‘ ---
**Author:** ![olaberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/olaberg/32/120730_2.png) [@olaberg](https://community.homey.app/u/olaberg)\ **Post date:** [July 8, 2025, 11:44am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/188 "2025-07-08T11:44:37Z")
Thank you for making this! Would it be possible to add support for ZG2819S-DIM? ---
**Author:** ![niracler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niracler/32/120644_2.png) [@niracler](https://community.homey.app/u/niracler)\ **Post date:** [July 15, 2025, 2:13am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/189 "2025-07-15T02:13:00Z")
Hi, @olaberg . The device ZG2819S-DIM is now supported in the test version. You can try it out via the following link: > **[EasyLighting](https://homey.app/en-us/app/com.easyhome.easylighting/EasyLighting/test/)** > > Make smart home easy. ---
**Author:** ![olaberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/olaberg/32/120730_2.png) [@olaberg](https://community.homey.app/u/olaberg)\ **Post date:** [July 16, 2025, 10:58pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/190 "2025-07-16T22:58:00Z")
Thank you so much @niracler! You are a legend! It works ---
**Author:** ![Christian\_Ruud](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/christian_ruud/32/121575_2.png) [@Christian\_Ruud](https://community.homey.app/u/Christian_Ruud)\ **Post date:** [August 18, 2025, 8:52am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/191 "2025-08-18T08:52:14Z")
Hi @Easy_Home , @niracler and thanks for a great app. Iā€™ve added the ZG9001T4-DIM-EU, and it mostly works, but I have an issue. Btw., I looked on the GitHub repo that was linked somewhere in this thread, but I couldnā€™t find the code for the driver. Is the repo or this thread the correct place to ask? Anyway, my problem is with the scene selections: I canā€™t seem to make the flows trigger. I suspect it is because the cards say ā€œGroup X scene X long/short pressā€. I donā€™t think the group is relevant when selecting scenes (I certainly donā€™t want to use that, I simply want to click a scene), and I suspect no group is sent when a scene button is pressed. Can you help? ---
**Author:** ![niracler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niracler/32/120644_2.png) [@niracler](https://community.homey.app/u/niracler)\ **Post date:** [August 22, 2025, 6:57am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/192 "2025-08-22T06:57:11Z")
Hi @Christian_Ruud For this device, the group is necessaryā€”it sends recall and restore scene commands specifically to the selected group. The top row of buttons on this device corresponds to group 1, 2, 3, and 4. However, I have updated the design of this card. Now, the specific scene will send to the device as a token. For example, you can configure it as shown in the two images. ![Image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/f/0fe00dd4a20109d96cf56e6d79ba2f6529588e30.jpeg) ![Image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/7/f7dfaa4c49edfacceb1c7a9578f7565e2fefe500.jpeg) Here is the test version > **[EasyLighting](https://homey.app/en-us/app/com.easyhome.easylighting/EasyLighting/test/)** > > Make smart home easy. ---
**Author:** ![wallin](https://avatars.discourse-cdn.com/v4/letter/w/b5e925/32.png) [@wallin](https://community.homey.app/u/wallin)\ **Post date:** [October 8, 2025, 10:52am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/193 "2025-10-08T10:52:30Z")
Hi @niracler , and thank you for great work on the EasyLighting app! I have the Sunricher ZG9095B Thermostat, which works great with this app. I was wondering if itā€™s possible to make the following improvements: - Make the status indicator on the device card configurable (eg. showing room temperature). Right now itā€™s not allowing me to select anything. - Iā€™m not sure if this is functionality in Homey or the Device, but there is an option to set ā€œPower usage when onā€. Is it possible to get the device to report usage so it shows up in the Energy section of the app? ---
**Author:** ![niracler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niracler/32/120644_2.png) [@niracler](https://community.homey.app/u/niracler)\ **Post date:** [October 9, 2025, 1:42am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/194 "2025-10-09T01:42:56Z")
Hi @wallin Thank you for your optimization suggestions. I will apply for equipment to see how to design it. I have a lot of work arrangements recently, so it will probably take one to two weeks to give you accurate feedback. ---
**Author:** ![yuriestevan](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/yuriestevan/32/123647_2.png) [@yuriestevan](https://community.homey.app/u/yuriestevan)\ **Post date:** [October 22, 2025, 6:43pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/195 "2025-10-22T18:43:29Z")
Hi Easy Home, I hope all is well šŸ™‚ Iā€™m trying to add a **Sunricher SRP-ZV9105-75CC Z-Wave Dimmable LED Driver** to my Homey (EU frequency, 868.42 MHz), but I always get the same error: > ā€œUnable to connect ā€” Something went wrong while adding the device.ā€ Iā€™ve tried multiple approaches: - Using the **Sunricher app** , **ROBB Smarrt app** , **EasyLighting** and **Generic Z-Wave device** - Factory reset of the device before each attempt - Adding both **secure** (S0 / S2) and **non-secure** - Creating my own **custom app** using the correct manufacturer and product IDs - Even forcing `"secure": []` to disable security completely In every case, Homey shows _ā€œUnable to connectā€_ (sometimes _request\_timeout_) and the app log shows no activity ā€” meaning the pairing never actually starts communication. Using **Silicon Labs PC Controller** (Simplicity Studio): - The device includes successfully and responds to commands normally. - Hereā€™s the information from the Z-Wave log: ```auto Manufacturer ID: 0x0330 (816) Product Type ID: 0x0200 (512) Product ID: 0xD002 (53250) Z-Wave Plus Version: 2 Role Type: Always On Slave (AOS) Node Type: Z-Wave Plus Node ``` So my `driver.compose.json` looks like this: ```auto "zwave": { "manufacturerId": [816], "productTypeId": [512], "productId": [53250], "secure": ["S0", "S2_UNAUTHENTICATED"] } ``` Still, Homey always fails with a timeout before reaching the `onMeshInit()` in the device driver. It looks like Homey canā€™t complete the secure inclusion (S2 negotiation), or the product ID is not matching internally. Interestingly, the same device includes and works fine through the **Z-Wave PC Controller** , so the hardware itself is okay. Has anyone managed to include **Sunricher SRP-ZV9105-75CC** or a similar Z-Wave dimmable driver with Homey? Is there any known issue with S2\_UNAUTHENTICATED negotiation or Z-Wave inclusion timing on these devices? Would forcing Homey to include _non-secure only_ be possible through the app manifest? Thanks in advance for any help ā€” Iā€™ve spent quite a few hours debugging this one and would really appreciate any insight. ---
**Author:** ![niracler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niracler/32/120644_2.png) [@niracler](https://community.homey.app/u/niracler)\ **Post date:** [October 23, 2025, 8:22am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/196 "2025-10-23T08:22:54Z")
hi @yuriestevan If possible, could you send us a photo of your device? Weā€™d like to check some details on the label, like the production date, to confirm which batch it belongs to. ---
**Author:** ![yuriestevan](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/yuriestevan/32/123647_2.png) [@yuriestevan](https://community.homey.app/u/yuriestevan)\ **Post date:** [October 23, 2025, 9:09am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/197 "2025-10-23T09:09:50Z")
Hi @niracler, here is the picture šŸ™‚ ![homey led driver](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/f/0fbc4e53ae4cb62dd490810e135908ce82f6b760.jpeg) ---
**Author:** ![Robin\_Lunden](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robin_lunden/32/12626_2.png) [@Robin\_Lunden](https://community.homey.app/u/Robin_Lunden)\ **Post date:** [October 23, 2025, 10:11am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/198 "2025-10-23T10:11:50Z")
It would be amazing if you are able to make this work! I am very committed to these drivers, and they worked fine in my old homey. thanks for your hard work, Robin ---
**Author:** ![Fac3](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fac3/32/4550_2.png) [@Fac3](https://community.homey.app/u/Fac3)\ **Post date:** [October 30, 2025, 7:37am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/199 "2025-10-30T07:37:59Z")
Dear @Easy_Home , Iā€™ve just got a demo package form Sunricher again, it contains a SR-ZG9030A-PIR which seems to be not supported, while SR-ZG9030A-MW has support for long. If you can duplicate the driver I can test it almost immediately. Thanks, ---
**Author:** ![Fac3](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fac3/32/4550_2.png) [@Fac3](https://community.homey.app/u/Fac3)\ **Post date:** [November 2, 2025, 6:19pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/200 "2025-11-02T18:19:38Z")
Other issue with other demo equipment: I can not add Matter enabled DIN mountable dimmer - SR-MT9042A-D - to Homey by the standard method ![IMG_6957](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/1/819d4de883d82e5850c8fce996dff96b7d6f2210.png) it drops an error message what you can see below: ![IMG_6958](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/c/bcc7859c92158a5d019e10fb2ee3144ae1678e81.png) ---
**Author:** ![Fac3](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fac3/32/4550_2.png) [@Fac3](https://community.homey.app/u/Fac3)\ **Post date:** [November 2, 2025, 7:02pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/201 "2025-11-02T19:02:16Z")
Other issue with ZG-9030F-PS: Motion alarm timeout canā€™t be adjusted, seemingly itā€™s 5 minutes by default. Is there any setting in the sensor what was not integrated into advanced settings in the user interface? After interviewing the device i found some setting: ![KeĢpernyoĢ‹fotoĢ 2025-11-02 - 20.00.21](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/c/cc6a436f75f02e5cb61c75c7aecb3cf7945daec8.png) Could you please implement this feature into advanced settings of the device? ---
**Author:** ![niracler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niracler/32/120644_2.png) [@niracler](https://community.homey.app/u/niracler)\ **Post date:** [November 4, 2025, 8:39am UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/202 "2025-11-04T08:39:35Z")
@Fac3 Hi, I need your help. Add this SR-ZG9030A-PIR device to the homey gateway, then in the advanced settings page of the device, find the manufacturer ID, product ID and provide them to me. ---
**Author:** ![Robin\_Lunden](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robin_lunden/32/12626_2.png) [@Robin\_Lunden](https://community.homey.app/u/Robin_Lunden)\ **Post date:** [November 6, 2025, 12:48pm UTC](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588/203 "2025-11-06T12:48:19Z")
Can i upp this? @Yriestevan who is also in this thread is an engineer friend who is helping me with this. Is there anything we can do to facilitate getting this to work in the app? Thank you Robin [Previous page](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588.md?page=9) [Next page](https://community.homey.app/t/app-pro-easylighting-make-smart-home-easy/65588.md?page=11)