# \[APP\]\[Pro\] Domoticz - Control at your finger tips

**URL:** <https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034>\
**Category:** Apps\
**Tags:** app, domoticz, homey-pro\
**Created:** [December 29, 2018, 12:42pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034 "2018-12-29T12:42:31Z")\
**Posts on this page:** 20\
**Page:** 5

<div class="post-metadata">

**Author:** ![Jeroen\_Somhorst](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_somhorst/32/184_2.png) [@Jeroen\_Somhorst](https://community.homey.app/u/Jeroen_Somhorst)\
**Post date:** [December 2, 2019, 8:30pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/84 "2019-12-02T20:30:33Z")

</div>

This is indeed an option to do it this way. I still have to check if I can do it another ‘better’ way since the kwh values are also , automaticaly, done correctly.

When I have to the time I will add this patch for the time being

---

<div class="post-metadata">

**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\
**Post date:** [December 3, 2019, 2:22pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/85 "2019-12-03T14:22:40Z")

</div>

![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/5/d522bd4b84210b42ad0af29f58706c3226e2979c.png)  
Inside Domoticz, the value for Gas already has a decimal point also for the Voltage, but the Energy totals don’t have a decimal point.  
Anyway, thanks for the good work!

---

<div class="post-metadata">

**Author:** ![Rik\_Jongsma](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rik_jongsma/32/4082_2.png) [@Rik\_Jongsma](https://community.homey.app/u/Rik_Jongsma)\
**Post date:** [February 5, 2020, 8:21am UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/86 "2020-02-05T08:21:42Z")

</div>

Hey all.  
Why don’t I see my custom sensor from domoticz in Homey?  
is it possible to make this visible as a device?

---

<div class="post-metadata">

**Author:** ![Eelco\_van\_Kesteren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eelco_van_kesteren/32/17077_2.png) [@Eelco\_van\_Kesteren](https://community.homey.app/u/Eelco_van_Kesteren)\
**Post date:** [February 5, 2020, 12:41pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/87 "2020-02-05T12:41:43Z")

</div>

Thank you Jeroen for this Domoticz app on the homey, do you know when the “Lighting 1” switch will be supported , This is a “dummy” switch created by hand, but not seen with the import to homey.

---

<div class="post-metadata">

**Author:** ![Eelco\_van\_Kesteren](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eelco_van_kesteren/32/17077_2.png) [@Eelco\_van\_Kesteren](https://community.homey.app/u/Eelco_van_Kesteren)\
**Post date:** [February 5, 2020, 3:43pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/88 "2020-02-05T15:43:58Z")

</div>

Creating the virtual device in the hardware section instead of the switch selection in Domoticz, did create the virtual device as “switch” instead of “Lighting 1”, now I was able to import this virtual switch into Homey. Thank for the use of your app.

---

<div class="post-metadata">

**Author:** ![Jup](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jup/32/17303_2.png) [@Jup](https://community.homey.app/u/Jup)\
**Post date:** [February 19, 2020, 6:01pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/89 "2020-02-19T18:01:19Z")

</div>

@ Jeroen\_Somhorst  
I just got my Homey today and installed your domoticz app.  
On my synology i have domoticz running, a P1 smart meter cable is connected. In Domoticz i can see the current usage and the “Meterstanden”

Homey connects to my domoticz and sees the device, i can add Current usage and “Meterstanden”.  
Unfortunatly it displays no values ☹

What am i doing wrong ?

 ![IMG_0467.PNG](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/5/f5a4e16d482e1cb9e60cb346b083156ab20ccbe9.jpeg)

---

<div class="post-metadata">

**Author:** ![Jup](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jup/32/17303_2.png) [@Jup](https://community.homey.app/u/Jup)\
**Post date:** [February 19, 2020, 6:07pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/90 "2020-02-19T18:07:52Z")

</div>

From my synology server:

 ![Domoticz screen](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/0/50d0ae84adb98a8c9a534fe5a1480dbfc9904d8e.jpeg)

---

<div class="post-metadata">

**Author:** ![Jeroen\_Somhorst](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_somhorst/32/184_2.png) [@Jeroen\_Somhorst](https://community.homey.app/u/Jeroen_Somhorst)\
**Post date:** [February 19, 2020, 6:21pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/91 "2020-02-19T18:21:14Z")

</div>

Does it still show no values? Or did it after a while?

---

<div class="post-metadata">

**Author:** ![Jup](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jup/32/17303_2.png) [@Jup](https://community.homey.app/u/Jup)\
**Post date:** [February 20, 2020, 11:11am UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/92 "2020-02-20T11:11:53Z")

</div>

Still does not show any values

---

<div class="post-metadata">

**Author:** ![Jup](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jup/32/17303_2.png) [@Jup](https://community.homey.app/u/Jup)\
**Post date:** [February 21, 2020, 8:11am UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/93 "2020-02-21T08:11:46Z")

</div>

@Jeroen_Somhorst  
I removed and installed the app a few times and added and removed the P1 Meter device (2 devices / Stroom & Meterstanden)

I tried installling only 1 of these (Meterstanden) and then the info was shown in Homey, when i added the other (Stroom) the information from the devices were gone. (Both meters were shown in Homey, but without info)  
I had to uninstall the devices and the app again and start over.

Once again installing the app and only adding the Meterstanden, the info was shown.

@JPe4619  
Could you tell me where you put your value codes for the decimal point ?

---

<div class="post-metadata">

**Author:** ![Wolter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wolter/32/15775_2.png) [@Wolter](https://community.homey.app/u/Wolter)\
**Post date:** [February 21, 2020, 9:31am UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/94 "2020-02-21T09:31:32Z")

</div>

I have the same issue. After updating to Homey 4.0.0 it doesn’t sync anymore. Domoticz on the Raspberry is still up and running.

---

<div class="post-metadata">

**Author:** ![Jup](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jup/32/17303_2.png) [@Jup](https://community.homey.app/u/Jup)\
**Post date:** [February 21, 2020, 9:37am UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/95 "2020-02-21T09:37:32Z")

</div>

It works for me, but only if i only add the Meterstanden device (then one with all the info)

---

<div class="post-metadata">

**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\
**Post date:** [February 21, 2020, 9:44am UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/96 "2020-02-21T09:44:54Z")

</div>

> [@Jup](#):
>
> @JPe4619  
> Could you tell me where you put your value codes for the decimal point ?

Downloaded the project from Github and changed the next lines in **device.js**

> ```
> case CAPABILITY_CUMULATIVE_POWER_HIGH:
> if(data.hasOwnProperty("Data") && (data.Data !== null && data.Data!=="")){
> value = (DomoticzDevice.getMeterValue(data.Data,"T1"))/1000;
> }
> break;
> case CAPABILITY_CUMULATIVE_POWER_LOW:
> if(data.hasOwnProperty("Data") && (data.Data !== null && data.Data!=="")){
> value = (DomoticzDevice.getMeterValue(data.Data,"T2"))/1000;
> }
> break; 
> 
> ```

Then start the App by CLI

---

<div class="post-metadata">

**Author:** ![Wolter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wolter/32/15775_2.png) [@Wolter](https://community.homey.app/u/Wolter)\
**Post date:** [February 21, 2020, 9:46am UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/97 "2020-02-21T09:46:28Z")

</div>

Please ignore my previous comment -\> a Homey restart fixed the issue 😆

---

<div class="post-metadata">

**Author:** ![Jup](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jup/32/17303_2.png) [@Jup](https://community.homey.app/u/Jup)\
**Post date:** [February 21, 2020, 3:03pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/98 "2020-02-21T15:03:24Z")

</div>

Ok, thanks…i will leave it as it is for the moment. Maybe a project for the future 😄

---

<div class="post-metadata">

**Author:** ![RobVos](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robvos/32/16441_2.png) [@RobVos](https://community.homey.app/u/RobVos)\
**Post date:** [March 15, 2020, 3:17pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/99 "2020-03-15T15:17:28Z")

</div>

I installed the app. Thank you for the app.  
It functions good until I change the set point for a thermostat.  
When I change the set point, I get a message, the app stopped working.  
And the thermostat set point is constantly changing from 19 to 21 to 20 and so on.  
Also in domoticz I can see it is changing.  
Do you know what might be the problem?

---

<div class="post-metadata">

**Author:** ![Rik\_Jongsma](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rik_jongsma/32/4082_2.png) [@Rik\_Jongsma](https://community.homey.app/u/Rik_Jongsma)\
**Post date:** [April 16, 2020, 6:28pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/100 "2020-04-16T18:28:40Z")

</div>

Hi all,  
After updating domoticz to version 2020.1, nothing works in Homey anymore, I have lost my sensors.  
Do more people have this problem?

---

<div class="post-metadata">

**Author:** ![Jeroen\_Somhorst](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeroen_somhorst/32/184_2.png) [@Jeroen\_Somhorst](https://community.homey.app/u/Jeroen_Somhorst)\
**Post date:** [April 16, 2020, 6:50pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/101 "2020-04-16T18:50:15Z")

</div>

Did you restart the app/homey?

---

<div class="post-metadata">

**Author:** ![Rik\_Jongsma](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rik_jongsma/32/4082_2.png) [@Rik\_Jongsma](https://community.homey.app/u/Rik_Jongsma)\
**Post date:** [April 16, 2020, 7:23pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/102 "2020-04-16T19:23:03Z")

</div>

Yes even uninstall and reinstall the domoticz application.

---

<div class="post-metadata">

**Author:** ![Rik\_Jongsma](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rik_jongsma/32/4082_2.png) [@Rik\_Jongsma](https://community.homey.app/u/Rik_Jongsma)\
**Post date:** [April 16, 2020, 7:35pm UTC](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034/103 "2020-04-16T19:35:11Z")

</div>

After installation, the hosname, port, username and password of the admin of the domoticz but I don’t see any sensors appear in the box below.  
I can only save and back

[Previous page](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034.md?page=4)

[Next page](https://community.homey.app/t/app-pro-domoticz-control-at-your-finger-tips/6034.md?page=6)