# \[APP\]\[Pro\] Device Capabilities - Enhance the capabilities of devices **URL:** \ **Category:** Apps\ **Tags:** flow, virtual-device, homey-pro, device-capabilities, avd\ **Created:** [February 19, 2021, 8:20am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287 "2021-02-19T08:20:51Z")\ **Posts on this page:** 20\ **Page:** 50
**Author:** ![Fredrik\_SE](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fredrik_se/32/66668_2.png) [@Fredrik\_SE](https://community.homey.app/u/Fredrik_SE)\ **Post date:** [December 17, 2022, 9:57am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/993 "2022-12-17T09:57:06Z")
Thanks Peter for an updated howto. But I have to inform you that I don’t get anything near what you get. After I put in the TEF and read the flow. (Only tryed all Montions TEF so far) and all I get after I read the flow is “Sensors”, “Lights” and “crono-something) which I have installed. I don’t get anything with Users or anything else. ---
**Author:** ![HuisCHovens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/huischovens/32/16973_2.png) [@HuisCHovens](https://community.homey.app/u/HuisCHovens)\ **Post date:** [December 17, 2022, 12:43pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/994 "2022-12-17T12:43:58Z")
I have the same problem most of the tef codes work well. But where you have to enter a new name for a timer or stopwatch from Chronograph. I don’t get any code from that either, if I don’t change that box, it works well. Then it’s just adjusting the flow again to a new timer. ---
**Author:** ![Arie\_J\_Godschalk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_j_godschalk/32/63027_2.png) [@Arie\_J\_Godschalk](https://community.homey.app/u/Arie_J_Godschalk)\ **Post date:** [December 17, 2022, 3:13pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/995 "2022-12-17T15:13:19Z")
Which TEF goes wrong? ---
**Author:** ![HuisCHovens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/huischovens/32/16973_2.png) [@HuisCHovens](https://community.homey.app/u/HuisCHovens)\ **Post date:** [December 17, 2022, 3:57pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/996 "2022-12-17T15:57:15Z")
Flow from @Peter_Kawa Device state time logger. It works fine but i can not save a name for the chronograph. I can change it in the flow it self and than it works. > [@The Flow Exchange(r) - Exchange Your Flows with Others!](https://community.homey.app/t/the-flow-exchange-r-exchange-your-flows-with-others/68981/23): > > Device state Time logger (Fixed some logics issues) For how long was my device on or off today (or the last X hrs/days)? The example flow resets the stopwatch at midnight. By pausing the stopwatch, when the device status is changed back, the times get added automatically when the device status changed again, until one resets the stopwatch. The duration gets written into 2 variables, one with hh:mm:ss format and one with human time format. Watercooker als test device i cant change it to this ![Screenshot_20221217-220033](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/e/bedfdb121b47e312ec3f366267528297d5868206.png) ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [December 17, 2022, 8:20pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/997 "2022-12-17T20:20:38Z")
OK Christiaan, I’ll test this to see what’s up with this TEF. Hang on. _Oh, it would be so great when everyone shares the link to the topic post of the TEF they refer to._ To copy the link: 1. Hit the time/date indicator of the post: > ![Screenshot from 2022-12-17 21-50-04](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/f/5f2e0721ce7b0dd785041d2b694fb0cf7b6a1f1a.png) 1. Or hit the ‘chain’ link icon of the post: > ![Screenshot from 2022-12-17 21-50-14](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/2/b224a093245ab0f245559a93a5c4302df112d190.png) > [@HuisCHovens](#): > > Flow from @Peter_Kawa Device state time logger. It works fine but i can not save a name for the chronograph. I can change it in the flow it self and than it works. Ah, now I get what you mean. The name of the Chronograph Stopwatch device is just not adjustable at the moment. So for now, change it yourself in the imported flow like you did. @Arie_J_Godschalk is this a bug, or should Chronograph not be in the App Tokens listing? When I alter it’s name, the script does not respond and does not create the “Update text”, and the flow can’t be imported (I’ll createt a [bitbucket issue](https://bitbucket.org/QlusterIT/nl.qluster-it.devicecapabilities/issues/21/tef-changing-the-name-of-a-chronograph) for this). ![Screenshot from 2022-12-17 21-49-23](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/f/afd5412f4d60bc7a8c08adf53304a81b1cee1e29.png) It’s [about this TEF](https://community.homey.app/t/the-flow-exchange-r-exchange-your-flows-with-others/68981/23) ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [December 17, 2022, 8:43pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/998 "2022-12-17T20:43:39Z")
> [@Fredrik\_SE](#): > > I don’t get anything with Users or anything else. That’s just possible data. Only the items used in the flow, and which are adjustable will be presented, like explained in step 3. > [@The Flow Exchange(r) - Exchange Your Flows with Others!](https://community.homey.app/t/the-flow-exchange-r-exchange-your-flows-with-others/68981/3): > > 1. Press that button, and it will show all found Devices, App(tokens), Users and Variables, that are in the flow you are importing The screenshots are just _examples_, it is not of the TEF you want to import… What happens if you proceed and hit “Update Text”, without bothering about the ‘users’ or ‘variables’ stuff above that? Which TEF are we talking about? Share it pls, and I can try to reproduce. **EDIT** Maybe it’s a similar issue as in [this post](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/997)? ---
**Author:** ![Fredrik\_SE](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fredrik_se/32/66668_2.png) [@Fredrik\_SE](https://community.homey.app/u/Fredrik_SE)\ **Post date:** [December 18, 2022, 7:32am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/999 "2022-12-18T07:32:48Z")
The TEF’s im trying to import is > [@The Flow Exchange(r) - Exchange Your Flows with Others!](https://community.homey.app/t/the-flow-exchange-r-exchange-your-flows-with-others/68981/23#motion-activated-lightdevice-off-after-a-certain-time-of-no-motion-1): > > Device state Time logger (Fixed some logics issues) For how long was my device on or off today (or the last X hrs/days)? The example flow resets the stopwatch at midnight. By pausing the stopwatch, when the device status is changed back, the times get added automatically when the device status changed again, until one resets the stopwatch. The duration gets written into 2 variables, one with hh:mm:ss format and one with human time format. > [@The Flow Exchange(r) - Exchange Your Flows with Others!](https://community.homey.app/t/the-flow-exchange-r-exchange-your-flows-with-others/68981/23#motion-and-presence-activated-lightdevice-with-sunset-condition-1): > > Device state Time logger (Fixed some logics issues) For how long was my device on or off today (or the last X hrs/days)? The example flow resets the stopwatch at midnight. By pausing the stopwatch, when the device status is changed back, the times get added automatically when the device status changed again, until one resets the stopwatch. The duration gets written into 2 variables, one with hh:mm:ss format and one with human time format. > [@The Flow Exchange(r) - Exchange Your Flows with Others!](https://community.homey.app/t/the-flow-exchange-r-exchange-your-flows-with-others/68981/23#motion-activated-lightdevice-with-lux-condition-1): > > Device state Time logger (Fixed some logics issues) For how long was my device on or off today (or the last X hrs/days)? The example flow resets the stopwatch at midnight. By pausing the stopwatch, when the device status is changed back, the times get added automatically when the device status changed again, until one resets the stopwatch. The duration gets written into 2 variables, one with hh:mm:ss format and one with human time format. Basically all TEF actually. The TEF’s are loading up fine and i can choose lights and sensor. I did however get it to work if i set Chronograph to “Do not change” Here are some screenshots. ![Skärmbild 2022-12-18 082435](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/b/bb134c1ab2b7e6ad20fc6c828e4c49f8de95a425.png) On this screenshot i dont get anything when Chronograph is set to “Create” ![Skärmbild 2022-12-18 082918](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/e/de4b51d704b41b0d42964858e58c84afca371d43.png) Here i change to “Don’t change” and now i get a script when i hit “Update Text” So to me it seems to be a problem with Chronograph? ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [December 18, 2022, 5:58pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1000 "2022-12-18T17:58:02Z")
A yes, it’s about [this bug](https://bitbucket.org/QlusterIT/nl.qluster-it.devicecapabilities/issues/21/tef-changing-the-name-of-a-chronograph) ---
**Author:** ![Tirrazo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tirrazo/32/55444_2.png) [@Tirrazo](https://community.homey.app/u/Tirrazo)\ **Post date:** [December 19, 2022, 8:45pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1001 "2022-12-19T20:45:20Z")
Is it possible to show the target number of the slider on top of the slider, not only the tile? Would it be possible to have several sliders beside each others, make them thinner? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/2/72bf1bcf8e1339c6ba9f9d692e0c71311f720b3f.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/c/ac4bb584dc70efa9c5b0836bda9ba9bca0076585.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/3/930c6b86e7911524832c2d980192dc0bcb7b24db.png) ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [December 19, 2022, 11:52pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1002 "2022-12-19T23:52:41Z")
I’m afraid these graphics are generated by Homey and out of developers hands. ---
**Author:** ![Tirrazo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tirrazo/32/55444_2.png) [@Tirrazo](https://community.homey.app/u/Tirrazo)\ **Post date:** [December 20, 2022, 7:21am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1003 "2022-12-20T07:21:31Z")
Ok ☹ Maybe Homey will see to such things later as they continue to develop themselves. ---
**Author:** ![Arie\_J\_Godschalk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_j_godschalk/32/63027_2.png) [@Arie\_J\_Godschalk](https://community.homey.app/u/Arie_J_Godschalk)\ **Post date:** [December 20, 2022, 8:26am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1004 "2022-12-20T08:26:51Z")
> [@Tirrazo](#): > > Is it possible to show the target number of the slider on top of the slider, not only the tile? > > Would it be possible to have several sliders beside each others, make them thinner? Indeed, all User Interfaces points are out of the scope of developers. You can ask Athom tho. ---
**Author:** ![TKroon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tkroon/32/9504_2.png) [@TKroon](https://community.homey.app/u/TKroon)\ **Post date:** [December 23, 2022, 5:45am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1005 "2022-12-23T05:45:38Z")
Is it possible to view the pictograms in this list (somewhere on the forum)? Now if I’m looking for something I have to try 80 different pictogram options. ![IMG_B713598E5CAA-1](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/2/422b109c24fc4adb6704dc88e47a55d1687d96d8.jpeg) ---
**Author:** ![Arie\_J\_Godschalk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_j_godschalk/32/63027_2.png) [@Arie\_J\_Godschalk](https://community.homey.app/u/Arie_J_Godschalk)\ **Post date:** [December 23, 2022, 6:08am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1006 "2022-12-23T06:08:22Z")
No, because there are more them 2000, not just 80. Goto the App Settings, there you can customize the 80, and give it names. ---
**Author:** ![TKroon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tkroon/32/9504_2.png) [@TKroon](https://community.homey.app/u/TKroon)\ **Post date:** [December 23, 2022, 6:27am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1007 "2022-12-23T06:27:24Z")
Thanks, was not aware of that! ---
**Author:** ![Sabe](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sabe/32/49393_2.png) [@Sabe](https://community.homey.app/u/Sabe)\ **Post date:** [December 24, 2022, 12:52pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1008 "2022-12-24T12:52:43Z")
Hello! Have tried to make on/off button to change logic values. Is it possible? As if you are at the summer house yes/no or if logic value Yes makes that a heater flow is possible to start if the value goes under X °C Regards Christian ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [December 24, 2022, 1:24pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1009 "2022-12-24T13:24:10Z")
It’s possible when you use a little flow set (But why you want to add a logic variable when you can use the status of the on/off button in your flows?) When button is on Then set logic variable to Yes When button is off Then set logic variable to No ---
**Author:** ![Arie\_J\_Godschalk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_j_godschalk/32/63027_2.png) [@Arie\_J\_Godschalk](https://community.homey.app/u/Arie_J_Godschalk)\ **Post date:** [December 29, 2022, 11:21am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1011 "2022-12-29T11:21:14Z")
> [@Sharkys](#): > > Also @Arie_J_Godschalk not sure if someone has already reported but seems that Device Capabilities settings page - Icons - scrolls to Other 19 and no more. Also repair sections for devices are somehow broken… Both resolved in upcomming release. ---
**Author:** ![Arie\_J\_Godschalk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_j_godschalk/32/63027_2.png) [@Arie\_J\_Godschalk](https://community.homey.app/u/Arie_J_Godschalk)\ **Post date:** [December 29, 2022, 11:44am UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1012 "2022-12-29T11:44:36Z")
Hey @DirkG In the next release (2.8.13), heavy data will not be pre-loaded anymore. Only when you go into - AVD → Open Share Your Device. Now it starts to preload - AVD → When creating from TEF it will load the data. - Settings → Export/Import When you click on export or import, it will (pre)load. ---
**Author:** ![Arie\_J\_Godschalk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_j_godschalk/32/63027_2.png) [@Arie\_J\_Godschalk](https://community.homey.app/u/Arie_J_Godschalk)\ **Post date:** [December 29, 2022, 12:12pm UTC](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287/1013 "2022-12-29T12:12:49Z")
Also, When you have a (in AVD) number with Power Measure with CreateFlowCards on: you get an option: Cumulative: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/1/31521901a9e7002e0c7b0d4750bfbc6aff84d3da.png) [Previous page](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287.md?page=49) [Next page](https://community.homey.app/t/app-pro-device-capabilities-enhance-the-capabilities-of-devices/43287.md?page=51)