# \[APP\]\[Pro\]\[Deprecated\] Arlo - Security Camera **URL:** \ **Category:** Apps\ **Tags:** netgear, arlo, camera, homey-pro\ **Created:** [June 24, 2019, 3:34pm UTC](https://community.homey.app/t/app-pro-deprecated-arlo-security-camera/14769 "2019-06-24T15:34:01Z")\ **Posts on this page:** 1\ **Showing post:** 346
**Author:** ![Homey\_User\_T](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_user_t/32/65605_2.png) [@Homey\_User\_T](https://community.homey.app/u/Homey_User_T)\ **Post date:** [December 29, 2020, 6:53pm UTC](https://community.homey.app/t/app-pro-deprecated-arlo-security-camera/14769/346 "2020-12-29T18:53:00Z")
FYI, I solved the problem of the non-support of Arlo Q’s with the following solution: Problem: I want to turn on/arm the cameras when I leave the home (set in Homey) and turn off/disarm when I’m back. Steps: 1. Install a Raspberry Pi (Lite is enough), integrate it into your WiFi and enable ssh 2. Create an own user (e.g. “arlo”) via useradd 3. Create an ssh key (ssh-keygen) 4. Install my command line tool under this new user: [https://github.com/thomaswitt/arlo-command-line](https://github.com/thomaswitt/arlo-command-line) (add your credentials in the script and add the .ssh/authorized\_users file with the generated id\_rsa.pub). Make sure it runs correct by invoking it from the command line (e.g. arlo-cl.py list) 5. Install the ssh client app on Homey ([SSH Client App for Homey | Homey](https://homey.app/en-ca/app/nl.marcovantklooster.sshclient/SSH-Client/)) 6. Configure the ssh client to connect to arlo@pi with the generated id\_rsa by adding a ssh client device 7. Add ssh client to a leaving home flow with the ssh command argument “arm” and to your returning home flow with the ssh command argument “disarm” Questions and comments welcome. --- _[View the full topic](https://community.homey.app/t/app-pro-deprecated-arlo-security-camera/14769)._