# \[APP\]\[Pro\] Daikin AI

**URL:** <https://community.homey.app/t/app-pro-daikin-ai/158>\
**Category:** Apps\
**Tags:** app\
**Created:** [August 22, 2018, 8:29pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158 "2018-08-22T20:29:49Z")\
**Posts on this page:** 20\
**Page:** 21

<div class="post-metadata">

**Author:** ![Ed\_Steenhoek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ed_steenhoek/32/51258_2.png) [@Ed\_Steenhoek](https://community.homey.app/u/Ed_Steenhoek)\
**Post date:** [June 21, 2021, 7:38am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/406 "2021-06-21T07:38:00Z")

</div>

That did the trick. Capability is now available and the test on operation mode is now working.

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [June 21, 2021, 9:44pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/407 "2021-06-21T21:44:05Z")

</div>

> [@Breathe\_One](#):
>
> I can connect my smart phone to the adapter wifi signal, however I am unable to:  
> a) connect direct to Homey, I get the red message “your settings are being saved now…” and then nothing gets added.  
> b) connect the adapter to the actual Daikin AP (not sure if the problem is related but I assume it is) It keeps telling my my smart phone is not connected, when it actually is connected.

Suggestions:

- download the Daikin Online Controller (EU?) app from google/apple’s app store (might require you to change your region)
- add/connect the adapter into your wifi network, not directly to Homey, using the official Daikin Controller app, have a look at this video [https://youtu.be/etRYUxCyZdA](https://youtu.be/etRYUxCyZdA)

---

<div class="post-metadata">

**Author:** ![Dennis\_Lex](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dennis_lex/32/33853_2.png) [@Dennis\_Lex](https://community.homey.app/u/Dennis_Lex)\
**Post date:** [June 23, 2021, 1:05pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/408 "2021-06-23T13:05:16Z")

</div>

Hi!  
First of all, very nice app! thanks a lot!  
i only have one annoying little issue. I can not set the econo (spaarstand) mode.  
If it is off and i set it to on, the selector will automatically switch back to off after a couple of seconds.  
It other way gives te same result.  
I can use the Daikin app (not the homey app) to set the econo mode and if i do, it does show up in the homey daikin app as well. I just can’t change it from there.

All other features work like a charm though!  
I’m using a BRP069B45 i.c.w. a FTXP25M9

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [June 23, 2021, 9:19pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/409 "2021-06-23T21:19:00Z")

</div>

I can not test this myself as my Emura 2 does not support econo mode to be turned on or off via the official Daikin app only via the IR remote. I need therefore some help from you…

1/ turn econo mode on, then using your browser… type [http://xxx.xxx.xxx.xxx/aircon/get\_control\_info](http://xxx.xxx.xxx.xxx/aircon/get_control_info) and retrieve response from your airco.  
2/ turn econo mode off, again retrieve response from your airco [http://xxx.xxx.xxx.xxx/aircon/get\_control\_info](http://xxx.xxx.xxx.xxx/aircon/get_control_info)  
3/ send both responses to me.

xxx.xxx is the ip-address of your airco.

Hope that the logs shine some light on the issue.

---

<div class="post-metadata">

**Author:** ![Dennis\_Lex](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dennis_lex/32/33853_2.png) [@Dennis\_Lex](https://community.homey.app/u/Dennis_Lex)\
**Post date:** [June 23, 2021, 9:37pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/410 "2021-06-23T21:37:23Z")

</div>

Thanks for the quick reply.  
I’ve highlighted the difference i spotted when turning it on and off.

1/ Econo mode on:  
ret=OK,pow=1,mode=3, **adv=12** ,stemp=23.0,shum=0,dt1=21.0,dt2=M,dt3=23.0,dt4=25.0,dt5=25.0,dt7=21.0,dh1=40,dh2=50,dh3=0,dh4=0,dh5=0,dh7=40,dhh=50,b\_mode=3,b\_stemp=23.0,b\_shum=0,alert=255,f\_rate=A,f\_dir=0,b\_f\_rate=A,b\_f\_dir=0,dfr1=A,dfr2=5,dfr3=A,dfr4=5,dfr5=5,dfr6=5,dfr7=A,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0,dmnd\_run=0,en\_demand=0

2/ Econo mode off:  
ret=OK,pow=1,mode=3, **adv=** ,stemp=23.0,shum=0,dt1=21.0,dt2=M,dt3=23.0,dt4=25.0,dt5=25.0,dt7=21.0,dh1=40,dh2=50,dh3=0,dh4=0,dh5=0,dh7=40,dhh=50,b\_mode=3,b\_stemp=23.0,b\_shum=0,alert=255,f\_rate=A,f\_dir=0,b\_f\_rate=A,b\_f\_dir=0,dfr1=A,dfr2=5,dfr3=A,dfr4=5,dfr5=5,dfr6=5,dfr7=A,dfrh=5,dfd1=0,dfd2=0,dfd3=0,dfd4=0,dfd5=0,dfd6=0,dfd7=0,dfdh=0,dmnd\_run=0,en\_demand=0

Hope this helps!

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [June 23, 2021, 9:38pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/411 "2021-06-23T21:38:11Z")

</div>

Thx, I will have a look.

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [July 1, 2021, 8:51pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/412 "2021-07-01T20:51:34Z")

</div>

> [@Twan\_Veugelers](#):
>
> I’m missing the AND card where the FAN speed can be selected.  
> I would like to program a single button, that can be pressed to change the fan speed from Auto to Silent and vice versa. But for that to be done, I need to know the current fan speed. So if there would be an AND card that provides me the FAN speed, that can be accomplished quite easily.

Work in progress…

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/6/66c9eac7c0bafdef3d26b8ed672eefab3b899e45.jpeg)

---

<div class="post-metadata">

**Author:** ![Twan\_Veugelers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/twan_veugelers/32/129333_2.png) [@Twan\_Veugelers](https://community.homey.app/u/Twan_Veugelers)\
**Post date:** [July 2, 2021, 11:42am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/413 "2021-07-02T11:42:02Z")

</div>

thank you.

If you need me to test a test version, let me know.

---

<div class="post-metadata">

**Author:** ![Martin\_Zijderhand](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_zijderhand/32/31766_2.png) [@Martin\_Zijderhand](https://community.homey.app/u/Martin_Zijderhand)\
**Post date:** [July 3, 2021, 8:33am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/414 "2021-07-03T08:33:51Z")

</div>

I’ve search for the fan speed too, i’ve made a script and set the values in a logic.  
There is a capability fan\_rate (quiet, auto, level1-level5) but it would be nice as the fan speed will be available in the app.

```auto
// Get all devices
const devices = await Homey.devices.getDevices();
// Loop over all devices
for (const device of Object.values(devices)) {
  // If this device isn't available, skip it.
  if (!device.capabilitiesObj) continue;
    if(device.name == 'Airco Woonkamer' || device.name == 'Airco Slaapkamer'){
      for (const capability of Object.values(device.capabilitiesObj)) {
         if(capability.title == 'Luchtdebiet') {
         log(`${device.name} \t ${capability.title}: \t${capability.value}`);
          }
      }
  }
};

```

Output:  
|Airco Woonkamer | Luchtdebiet: |quiet|  
|Airco Slaapkamer | Luchtdebiet: |level4|

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [July 3, 2021, 10:24am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/415 "2021-07-03T10:24:16Z")

</div>

> [@Dennis\_Lex](#):
>
> i only have one annoying little issue. I can not set the econo (spaarstand) mode.  
> If it is off and i set it to on, the selector will automatically switch back to off after a couple of seconds.

Hi Dennis,  
I found the bug and crushed it 😉 , a new version of the app is available in Homey’s test App Store.

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [July 3, 2021, 10:25am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/416 "2021-07-03T10:25:50Z")

</div>

> [@Twan\_Veugelers](#):
>
> If you need me to test a test version, let me know.

New version of the app is available in Homey’s test App Store.

---

<div class="post-metadata">

**Author:** ![Twan\_Veugelers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/twan_veugelers/32/129333_2.png) [@Twan\_Veugelers](https://community.homey.app/u/Twan_Veugelers)\
**Post date:** [July 3, 2021, 1:58pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/417 "2021-07-03T13:58:21Z")

</div>

> [@Homey\_Lampje](#):
>
> New version of the app is available in Homey’s test App Store.

Tested the Test Version (5.1.4) and reading the Fan Speed with a AND card works flawlessly.

Thank you very much, you earned the 5th star. 😉

---

<div class="post-metadata">

**Author:** ![Rolfsmeding](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rolfsmeding/32/33968_2.png) [@Rolfsmeding](https://community.homey.app/u/Rolfsmeding)\
**Post date:** [July 14, 2021, 6:55am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/418 "2021-07-14T06:55:39Z")

</div>

Hi.  
@Homey_Lampje is there any change ther will be compatibility in the future with the Altherma 3 air-water heatpump (EHVX08S23EJ6V)?  
If not, any other idea how I can automate the operation of the heat pump (so, not in residential controller)?  
Thanks,  
Rolf.

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [July 14, 2021, 7:54am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/419 "2021-07-14T07:54:45Z")

</div>

Unfortunately not.

With regards to your other question I have no ideas but google is likely also in this case your best friend 😉

---

<div class="post-metadata">

**Author:** ![Rolfsmeding](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rolfsmeding/32/33968_2.png) [@Rolfsmeding](https://community.homey.app/u/Rolfsmeding)\
**Post date:** [July 14, 2021, 8:48am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/420 "2021-07-14T08:48:28Z")

</div>

Thanks Peter!

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [July 15, 2021, 5:08pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/421 "2021-07-15T17:08:21Z")

</div>

**UPDATE:** there is mayor progress made regarding the possible support of the **BRP069C4x** WiFi adapter, aka Daikin Cloud, in Daikin AI. I will have a closer look in the coming weeks.

---

<div class="post-metadata">

**Author:** ![Frank\_van\_de\_Schuur](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frank_van_de_schuur/32/35882_2.png) [@Frank\_van\_de\_Schuur](https://community.homey.app/u/Frank_van_de_Schuur)\
**Post date:** [July 15, 2021, 6:42pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/422 "2021-07-15T18:42:30Z")

</div>

Huray 👏  
Looking forward to it

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [July 16, 2021, 6:52pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/423 "2021-07-16T18:52:51Z")

</div>

> [@Homey\_Lampje](#):
>
> **UPDATE:** there is mayor progress made regarding the possible support of the **BRP069C4x** WiFi adapter, aka Daikin Cloud, in Daikin AI. I will have a closer look in the coming weeks.

Dear users I just was informed that Athom has teamed up with another developer who will develop a Daikin Cloud app for them, so questions regarding Daikin Cloud support / support for the BRP069C4x WiFi adapter you can contact Athom directly / wait for the app announcement by the developer on this forum.

---

<div class="post-metadata">

**Author:** ![Robjuh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robjuh/32/45745_2.png) [@Robjuh](https://community.homey.app/u/Robjuh)\
**Post date:** [July 17, 2021, 10:45am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/424 "2021-07-17T10:45:33Z")

</div>

Thanks for the info

Can’t wait to connect it to homey

---

<div class="post-metadata">

**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\
**Post date:** [July 17, 2021, 11:16am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/425 "2021-07-17T11:16:35Z")

</div>

> [@Rolfsmeding](#):
>
> Hi.  
> @Homey_Lampje is there any change ther will be compatibility in the future with the Altherma 3 air-water heatpump (EHVX08S23EJ6V)?  
> If not, any other idea how I can automate the operation of the heat pump (so, not in residential controller)?  
> Thanks,  
> Rolf.

see my post about Daikin Cloud support…. your Altherma 3 uses the Daikin Cloud albeit these apparatus use a slightly different protocol then the airco’s do.

[Previous page](https://community.homey.app/t/app-pro-daikin-ai/158.md?page=20)

[Next page](https://community.homey.app/t/app-pro-daikin-ai/158.md?page=22)