# \[APP\]\[Pro\] Daikin AI **URL:** \ **Category:** Apps\ **Tags:** app\ **Created:** [August 22, 2018, 8:29pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158 "2018-08-22T20:29:49Z")\ **Posts on this page:** 20\ **Page:** 20
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 3, 2021, 3:37pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/386 "2021-06-03T15:37:40Z")
Time will tell… 😉 ---
**Author:** ![Philiptai19](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/philiptai19/32/34945_2.png) [@Philiptai19](https://community.homey.app/u/Philiptai19)\ **Post date:** [June 14, 2021, 3:10am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/387 "2021-06-14T03:10:07Z")
managed to manually install (via CLI, thanks to @Automate_Asia’s code ) for support on model BRP072C42. Highly recommend we push the code to the app ---
**Author:** ![Ed\_Steenhoek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ed_steenhoek/32/51258_2.png) [@Ed\_Steenhoek](https://community.homey.app/u/Ed_Steenhoek)\ **Post date:** [June 14, 2021, 6:22am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/388 "2021-06-14T06:22:33Z")
Good morning, Over the weekend I was cleaning up the flows I have around my airco units and ran into a challenge: retrieving the operation mode of a unit. The reason for this is that I don’t want to set the operation mode to cooling if the unit is already cooling. There is a card to test if the operation mode of a unit equals to e.g. cooling but that comes always back as false. And that is the case for all modes on all units. I can set the units to every operation mode I want so there is no communication issue. My app version is 5.0.16 and Homey is on 6.1.0. Adapter is BRP069Bxx. Is this a known feature or am I doing something wrong? I also noticed that there is - in my perception - odd behavior on the tiles. The circle behind the temperature on the tile is turning blue and black but that does not match the operation mode (cooling and off). Or is blue telling me that the measured temperature is higher than the target and I should be cooling? Final for now: Can I see the operation mode in [Homey Developer Tools](https://tools.developer.homey.app/tools/devices)? Thanks! Ed ---
**Author:** ![Heula](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heula/32/31852_2.png) [@Heula](https://community.homey.app/u/Heula)\ **Post date:** [June 14, 2021, 2:38pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/389 "2021-06-14T14:38:31Z")
On the standard remote that is delivered with the Daikin Emura there are two buttons that I miss in the app. Intelligent eye and comfort airflow. Why aren’t these options not available (yet)? ![2021-06-14 16_31_37-Window](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/b/fb05a5d456f5dfe99470f7ec017039c6344af61d.png) ![2021-06-14 16_31_25-Window](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/8/280222fd51e52292eb7204baab8bec87ede85f6b.png) ---
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 14, 2021, 3:09pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/390 "2021-06-14T15:09:10Z")
These functions will never be available as these functions are not supported by the Daikin (reverse engineered) API. ---
**Author:** ![Heula](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/heula/32/31852_2.png) [@Heula](https://community.homey.app/u/Heula)\ **Post date:** [June 14, 2021, 3:11pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/391 "2021-06-14T15:11:37Z")
Okay, that’s good to know. Thanks. ---
**Author:** ![Twan\_Veugelers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/twan_veugelers/32/129333_2.png) [@Twan\_Veugelers](https://community.homey.app/u/Twan_Veugelers)\ **Post date:** [June 18, 2021, 7:06pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/392 "2021-06-18T19:06:33Z")
Hi. I’ve got a feature request. I’m missing the AND card where the FAN speed can be selected. I would like to program a single button, that can be pressed to change the fan speed from Auto to Silent and vice versa. But for that to be done, I need to know the current fan speed. So if there would be an AND card that provides me the FAN speed, that can be accomplished quite easily. many regards, Twan ---
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 18, 2021, 7:19pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/393 "2021-06-18T19:19:29Z")
I might have a look for a 5 star rating… 😉 ---
**Author:** ![Twan\_Veugelers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/twan_veugelers/32/129333_2.png) [@Twan\_Veugelers](https://community.homey.app/u/Twan_Veugelers)\ **Post date:** [June 19, 2021, 6:24pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/394 "2021-06-19T18:24:06Z")
Adding the possibility to select the Fan Speed definitely warrants a 5 star rating. 😉 ---
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 20, 2021, 9:07am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/395 "2021-06-20T09:07:11Z")
I just hope you learned (ask before rate) something… ---
**Author:** ![Breathe\_One](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/breathe_one/32/37249_2.png) [@Breathe\_One](https://community.homey.app/u/Breathe_One)\ **Post date:** [June 20, 2021, 11:06am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/396 "2021-06-20T11:06:45Z")
Hi Peter, I’m hoping you or someone else can help me. I’m having a hard time connecting my new Daikin US7 to homey. I’ve read lots and just cant get the connection. AC is Daikin FTXZ25N I’m in Australia and the WiFi adapter for the Australian App I read is not compatible, so I have purchase from the US, BRP069B41 adapter. I can connect my smart phone to the adapter wifi signal, however I am unable to: a) connect direct to Homey, I get the red message “your settings are being saved now…” and then nothing gets added. b) connect the adapter to the actual Daikin AP (not sure if the problem is related but I assume it is) It keeps telling my my smart phone is not connected, when it actually is connected. Is there something wrong with the wifi settings, or what might I be doing wrong? ![wifi settngs on my modem](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/e/2ee09faae3e57cc2d6a0f7cf4a14635a56f6b78e.jpeg) ---
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 20, 2021, 9:16pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/397 "2021-06-20T21:16:44Z")
Hi, Trouble shooting step #1 Open a browser open this url [http://xxx.xxx.xxx.xxx/aircon/get\_control\_info](http://xxx.xxx.xxx.xxx/aircon/get_control_info) (were xxxx is the ip of your airco). Response should be like: ret=OK,pow=0,mode=0,adv=,stemp=21.0,shum=40,dt1=21.0,dt2=M,dt3=22.0,dt4=25.0,dt5=25.0,dt7=21.0,dh1=40,dh2=50,dh3=40,dh4=0,dh5=0,dh7=40,dhh=50,b\_mode=0,b\_stemp=21.0,b\_shum=40,alert=255,f\_rate=A,f\_dir=3,b\_f\_rate=A,b\_f\_dir=3,dfr1=A,dfr2=5,dfr3=A,dfr4=5,dfr5=5,dfr6=5,dfr7=A,dfrh=5,dfd1=3,dfd2=0,dfd3=3,dfd4=0,dfd5=0,dfd6=0,dfd7=3,dfdh=0 Please report. ---
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 20, 2021, 9:28pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/398 "2021-06-20T21:28:15Z")
> [@Ed\_Steenhoek](#): > > There is a card to test if the operation mode of a unit equals to e.g. cooling but that comes always back as false. And that is the case for all modes on all units. > > I can set the units to every operation mode I want so there is no communication issue. > My app version is 5.0.16 and Homey is on 6.1.0. Adapter is BRP069Bxx. > > Is this a known feature or am I doing something wrong? The feature is called ‘users own mistake’ 😉 This is working fine for me. ---
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 20, 2021, 9:30pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/399 "2021-06-20T21:30:08Z")
> [@Ed\_Steenhoek](#): > > I also noticed that there is - in my perception - odd behavior on the tiles. The circle behind the temperature on the tile is turning blue and black but that does not match the operation mode (cooling and off). Or is blue telling me that the measured temperature is higher than the target and I should be cooling? This is by (SDK) design, the color has nothing to do with the on/off state or mode of the airco. ---
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 20, 2021, 9:34pm UTC](https://community.homey.app/t/app-pro-daikin-ai/158/400 "2021-06-20T21:34:02Z")
> [@Ed\_Steenhoek](#): > > Final for now: Can I see the operation mode in [Homey Developer Tools](https://tools.developer.homey.app/tools/devices)? Sure ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/1/71aea7d839b71c36596d201d6295267f3b304013.jpeg) ---
**Author:** ![Breathe\_One](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/breathe_one/32/37249_2.png) [@Breathe\_One](https://community.homey.app/u/Breathe_One)\ **Post date:** [June 21, 2021, 4:57am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/401 "2021-06-21T04:57:46Z")
Hi Peter, I am unable to connect with the link!!! I just get the site cant be reaches error (both when connected to my wifi and also the daikin wifi adapter) ![Screenshot_20210621-133013_Samsung Internet](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/b/abc95f210f4b7ce300802103667df3b443c72fa6.jpeg) ---
**Author:** ![Ed\_Steenhoek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ed_steenhoek/32/51258_2.png) [@Ed\_Steenhoek](https://community.homey.app/u/Ed_Steenhoek)\ **Post date:** [June 21, 2021, 5:52am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/402 "2021-06-21T05:52:27Z")
I’m glad that it works for you… I don’t see it. ![Screenshot 2021-06-21 075035](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/6/b695625faeb6672e7463339000dda4887cb8260f.png) ---
**Author:** ![Ed\_Steenhoek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ed_steenhoek/32/51258_2.png) [@Ed\_Steenhoek](https://community.homey.app/u/Ed_Steenhoek)\ **Post date:** [June 21, 2021, 5:58am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/403 "2021-06-21T05:58:49Z")
If only I understood where my mistake was… Could this be using the value of the thermostat\_mode\_std capability that I don’t have? ---
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 21, 2021, 6:21am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/404 "2021-06-21T06:21:20Z")
Ed, try to ‘re-pair’ and see what happens, trouble shoot… ---
**Author:** ![Homey\_Lampje](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/homey_lampje/32/10392_2.png) [@Homey\_Lampje](https://community.homey.app/u/Homey_Lampje)\ **Post date:** [June 21, 2021, 6:25am UTC](https://community.homey.app/t/app-pro-daikin-ai/158/405 "2021-06-21T06:25:17Z")
> [@Breathe\_One](#): > > Hi Peter, > I am unable to connect with the link!!! So that is the problem… as long as this fails my app nor Homey can communicate with your airco. What is the official Daikin app called you use to control your airco? [Previous page](https://community.homey.app/t/app-pro-daikin-ai/158.md?page=19) [Next page](https://community.homey.app/t/app-pro-daikin-ai/158.md?page=21)