# \[App\]\[Pro\] D.A.L.O.R - Digitally Addressable LEDs On Rest **URL:** \ **Category:** Apps\ **Created:** [January 30, 2021, 10:58pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127 "2021-01-30T22:58:37Z")\ **Posts on this page:** 20\ **Page:** 7
**Author:** ![Shakesbeard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/shakesbeard/32/15112_2.png) [@Shakesbeard](https://community.homey.app/u/Shakesbeard)\ **Post date:** [May 20, 2024, 3:27pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/122 "2024-05-20T15:27:12Z")
If you followed the FAQ it should work. Check whether you have any device isolation features enabled in your WIFI Access Point, which might prevent zeroConf communication. Essentially Homey must be able to discover the WLED device using mDNS queries. If those are blocked for any reason it is impossible to detect them. ---
**Author:** ![Friedhofsblond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/friedhofsblond/32/93838_2.png) [@Friedhofsblond](https://community.homey.app/u/Friedhofsblond)\ **Post date:** [June 20, 2024, 4:45pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/123 "2024-06-20T16:45:18Z")
Hello, I would like to start my 8x8 matrix with a json file. If I start the json manually it looks like this: ![IMG_20240620_175909_resized_20240620_060023709](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/0/70b0251ce5680b60741d9d33fbb7fe8de3e12d20.jpeg) After a reboot unfortunately it looks like this: ![IMG_20240620_175828_resized_20240620_060023468](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/b/bb2745b7ce1213f6c072656650fd4c0b212dd61f.jpeg) The background image (json) is unfortunately no longer loaded. ![haus1](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/d/ad6c865e3f65d11224194a9df41a8d64ae4f8412.png) Can I save the json on the ESP and have it run when it starts?? ![wled-2](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/4/e489e21814b2ad1fa2a90ff3d1cc3b3b0a15574e.png) ![wled-flow](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/9/997b1e588b42ecae5a677834c145294ba08e4b77.png) What can I do? Vielen Dank 😉 ---
**Author:** ![Shakesbeard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/shakesbeard/32/15112_2.png) [@Shakesbeard](https://community.homey.app/u/Shakesbeard)\ **Post date:** [June 20, 2024, 5:06pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/124 "2024-06-20T17:06:46Z")
> [@Friedhofsblond](#): > > What can I do? If ya using WLED maybe you can ask on the WLED project if anyone has a suggestion on this. I cannot do support for their firmware. Otherwise… hmmm… I dunno. But if you find anything or anyone here knows how this can possibly be achieved I would be interested to know too ^^ ---
**Author:** ![Friedhofsblond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/friedhofsblond/32/93838_2.png) [@Friedhofsblond](https://community.homey.app/u/Friedhofsblond)\ **Post date:** [June 21, 2024, 5:10am UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/125 "2024-06-21T05:10:49Z")
I’ve already tried something in the forum-discourse.group. 🤦🏼‍♂️ This discourse.group is creepy, you’re not allowed to post pictures, no links from other forums, etc… let’s see ---
**Author:** ![Friedhofsblond](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/friedhofsblond/32/93838_2.png) [@Friedhofsblond](https://community.homey.app/u/Friedhofsblond)\ **Post date:** [June 21, 2024, 5:38am UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/126 "2024-06-21T05:38:32Z")
looks good (?): ![wled9](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/2/529841dffab9d54cb5af4ddac905bb13b121b03e.png) hier gefunden: [Wie sende ich JASON-API-Befehle von Node Red? - Fragen - WLED](https://wled.discourse.group/t/how-do-i-send-jason-api-commands-from-node-red/5108/2) 👍🏼 😜 ---
**Author:** ![Hubert\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hubert_b/32/79660_2.png) [@Hubert\_B](https://community.homey.app/u/Hubert_B)\ **Post date:** [November 13, 2024, 1:22pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/127 "2024-11-13T13:22:35Z")
Hi, I have a problem with WLED. Through the browser and ip address works. However, when adding in homey it finds WLED, but after adding it doesn’t respond to change in homey. Additionally, after a while I get a message that the device is not available. ---
**Author:** ![jc82517](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jc82517/32/21894_2.png) [@jc82517](https://community.homey.app/u/jc82517)\ **Post date:** [December 23, 2024, 9:57am UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/128 "2024-12-23T09:57:18Z")
Same here. ☹ ---
**Author:** ![Shakesbeard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/shakesbeard/32/15112_2.png) [@Shakesbeard](https://community.homey.app/u/Shakesbeard)\ **Post date:** [December 23, 2024, 1:36pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/129 "2024-12-23T13:36:12Z")
@jc82517 , @Hubert_B , Hi, What means after a while? Are we talking minutes, hours, or days? Do you guys use fixed IP address assignment for your WLEDs? Did you check your WiFi coverage? Do you have other home automation things controlling them as well aside of Homey? ---
**Author:** ![jc82517](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jc82517/32/21894_2.png) [@jc82517](https://community.homey.app/u/jc82517)\ **Post date:** [December 23, 2024, 2:08pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/130 "2024-12-23T14:08:13Z")
Hi. It was fine until a few days. Don’t changed anything. Well, I now push the devices from HA to Homey, so I am good now. 😉 ---
**Author:** ![Shakesbeard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/shakesbeard/32/15112_2.png) [@Shakesbeard](https://community.homey.app/u/Shakesbeard)\ **Post date:** [December 23, 2024, 2:47pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/131 "2024-12-23T14:47:55Z")
> [@jc82517](#): > > Well, I now push the devices from HA to Homey, so I am good now. 😉 well, yeah, you most likely had more than one system control WLED using the realtime protocol at the same time then, because wled only supports a single connection for that. ---
**Author:** ![Shakesbeard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/shakesbeard/32/15112_2.png) [@Shakesbeard](https://community.homey.app/u/Shakesbeard)\ **Post date:** [December 23, 2024, 5:46pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/132 "2024-12-23T17:46:24Z")
I ran a complete regression test on the WLED part of the app including connection recovery features for some hours on the new Homey Pro. Everything is working just fine. If you have connectivity issues it must be something caused by your setup. Either bad wifi coverage or a competing system trying to steal the connection to your WLED. ---
**Author:** ![Adrian\_Staniszewski](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_staniszewski/32/116894_2.png) [@Adrian\_Staniszewski](https://community.homey.app/u/Adrian_Staniszewski)\ **Post date:** [January 7, 2025, 9:44pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/133 "2025-01-07T21:44:05Z")
Hi, i have esp32 with wled software and i want to use homey to turn on one segment but i cat see that.opion. If homey only have option to change segment, not to turn on off them? ---
**Author:** ![Geir\_Skalvik](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/geir_skalvik/32/66215_2.png) [@Geir\_Skalvik](https://community.homey.app/u/Geir_Skalvik)\ **Post date:** [January 8, 2025, 12:51pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/134 "2025-01-08T12:51:12Z")
Don’t you have to make a preset in wled where that segment is turned off? At least that’s how I do it, one preset for every “light mood” I’d like, which you then can control with flows… ---
**Author:** ![Adrian\_Staniszewski](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_staniszewski/32/116894_2.png) [@Adrian\_Staniszewski](https://community.homey.app/u/Adrian_Staniszewski)\ **Post date:** [January 8, 2025, 1:34pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/135 "2025-01-08T13:34:30Z")
I dont kwon about what you are saying. What reset and how to control.it? In wled i have 2 segments and i want to have control them separetly. ---
**Author:** ![Marco\_Dagi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marco_dagi/32/128885_2.png) [@Marco\_Dagi](https://community.homey.app/u/Marco_Dagi)\ **Post date:** [February 21, 2025, 10:19pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/136 "2025-02-21T22:19:09Z")
Hi, I just bought ESP32, installed WLED and it working. I would like to change colors in segments by variables and not predefinied colors. How can I do that or will be an update with this option in future? Thanks for advice ---
**Author:** ![Shakesbeard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/shakesbeard/32/15112_2.png) [@Shakesbeard](https://community.homey.app/u/Shakesbeard)\ **Post date:** [February 21, 2025, 11:55pm UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/137 "2025-02-21T23:55:01Z")
![image.png](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/7/a72e814ea0f26a6808c323ce9f798bc14a9bdbb4.png) ---
**Author:** ![Marco\_Dagi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marco_dagi/32/128885_2.png) [@Marco\_Dagi](https://community.homey.app/u/Marco_Dagi)\ **Post date:** [February 22, 2025, 12:05am UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/138 "2025-02-22T00:05:36Z")
![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/b/6b705e3115c6262048374912fdc1199388fa00c2.png) when I click on color I don’t see way to set color from variable ---
**Author:** ![Shakesbeard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/shakesbeard/32/15112_2.png) [@Shakesbeard](https://community.homey.app/u/Shakesbeard)\ **Post date:** [February 22, 2025, 2:56am UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/139 "2025-02-22T02:56:28Z")
Oh true, there is the color picker behind it. Forgot about that. Might need a new card for that I guess. ---
**Author:** ![Andreas\_Nikolai](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andreas_nikolai/32/79470_2.png) [@Andreas\_Nikolai](https://community.homey.app/u/Andreas_Nikolai)\ **Post date:** [April 3, 2026, 12:24am UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/141 "2026-04-03T00:24:45Z")
Hello @Shakesbeard Thanks for a very nice app. Wled and Homey have made my apartment look alot better! Is it possible that you could add a “then” card for turning on/off sync on wled lights? Andreas ---
**Author:** ![Shakesbeard](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/shakesbeard/32/15112_2.png) [@Shakesbeard](https://community.homey.app/u/Shakesbeard)\ **Post date:** [April 3, 2026, 8:49am UTC](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127/142 "2026-04-03T08:49:58Z")
Not sure. Would need to dig deeper into it again. Are you talking about the udpn sync feature? [Previous page](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127.md?page=6) [Next page](https://community.homey.app/t/app-pro-d-a-l-o-r-digitally-addressable-leds-on-rest/42127.md?page=8)