# \[APP\]\[PRO&CLOUD\]\[OFFICIAL\] Growatt **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro, homey-bridge\ **Created:** [April 8, 2025, 9:02am UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233 "2025-04-08T09:02:04Z")\ **Posts on this page:** 12\ **Page:** 16
**Author:** ![Ad\_Dekkers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ad_dekkers/32/120751_2.png) [@Ad\_Dekkers](https://community.homey.app/u/Ad_Dekkers)\ **Post date:** [November 6, 2026, 4:01pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/307 "2026-11-06T16:01:13Z")
556abe7d-682d-4418-a914-1d7387fbdcc9 ---
**Author:** ![Ad\_Dekkers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ad_dekkers/32/120751_2.png) [@Ad\_Dekkers](https://community.homey.app/u/Ad_Dekkers)\ **Post date:** [November 9, 2026, 9:06am UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/308 "2026-11-09T09:06:04Z")
> [@Ad\_Dekkers](#): > Hi, i probably need to change the “External EMS” parameter, because now i can’t control anything. The problem is, that i have a case running @Growatt support, so i have to keep everyting the same for now. ---
**Author:** ![johnv](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johnv/32/16472_2.png) [@johnv](https://community.homey.app/u/johnv)\ **Post date:** [November 9, 2026, 10:53am UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/309 "2026-11-09T10:53:01Z")
From an HA post, i discovered the existance ShineWiLan-X2 for my MOD7000TL3-X inverter. So I purchased it last week and installed it yesterday, removing the white ShineLanBox from my meterkast :-). It also saves me a special Modbus connector and gateway. Then, I discovered that you provided support form this. I have Homey Pro (2019). Nice. Happy to test it !! (“have a Homey Pro with port forwarding enabled and configured in your router” - I have not set this up (yet).) I want to limit the energy/export/output, in order to not export to the grid on my inverter (I have no battery - the TL3-X also does not support that). I have set the ‘doelvermogen’. It can be set in steps of 5% of 7000, which seems fine. The Homey app/device reflects this nicely. The ShinePhone app seems to NOT reflect this. But that was a misconception from my part: - the standard ‘Power’ graph gives the DC side. - choosing ‘PAC’ (not sure what this. ‘Power AC’? ) nicely reflects the setting. - (I think I need to create a CR for the ShinePhone) for this. So for now, I am able to control 1 setting of the inverter. Nice! ---
**Author:** ![Graaf](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/graaf/32/159113_2.png) [@Graaf](https://community.homey.app/u/Graaf)\ **Post date:** [November 10, 2026, 2:14pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/310 "2026-11-10T14:14:35Z")
I’ve also ordered a ShineWiLan-X2, which should arrive tomorrow. As soon as I have some spare time, I’ll install it, give it a test and share my findings. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 10, 2026, 4:00pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/311 "2026-11-10T16:00:32Z")
> [@johnv](#): > > have a Homey Pro with port forwarding enabled Not shure why you’d need that, and it’s a major security risk. These connection types don’t need port forwarding: API: cloud connection ModbusTCP: local connection Plus, the port forwarding feature is only available for Pro 2023 and newer models. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [November 10, 2026, 4:08pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/312 "2026-11-10T16:08:38Z")
> [@Peter\_Kawa](#): > > risk. > These connection types don’t need port forwarding: > API: cloud connection > ModbusTCP: local connection > > Plus, the port forwarding feature is only available for Pro 2023 and newer models. That is so that I can do a remote cli app install from my development station. That is the only feasible way to analyse and debug a local (modbus) connection for me, since I do not have the hardware myself. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 10, 2026, 4:14pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/313 "2026-11-10T16:14:29Z")
Clear! I didn’t find any instructions concerning port forwarding. But it’s still not available for pre Pro 2023 models. ---
**Author:** ![Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gruijter/32/1973_2.png) [@Gruijter](https://community.homey.app/u/Gruijter)\ **Post date:** [November 10, 2026, 4:22pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/314 "2026-11-10T16:22:11Z")
> [@Peter\_Kawa](#): > > But it’s still not available for pre Pro 2023 models. It is not needed for normal app users. Only one-time required for users that want to help me develop the modbus interface. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 10, 2026, 10:59pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/315 "2026-11-10T22:59:43Z")
Yeah I tried to inform @johnv with that info, to save him from searching non-existent port forwarding settings on his > [@johnv](#): > > I have Homey Pro (2019) as he seems to try to enable port forwarding: > [@johnv](#): > > Happy to test it !! (“have a Homey Pro with port forwarding enabled and configured in your router” - I have not set this up (yet).) ---
**Author:** ![johnv](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johnv/32/16472_2.png) [@johnv](https://community.homey.app/u/johnv)\ **Post date:** [November 11, 2026, 12:36pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/316 "2026-11-11T12:36:52Z")
I did not enable this. It was not necessary. ---
**Author:** ![RM\_de\_Gruijter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rm_de_gruijter/32/120762_2.png) [@RM\_de\_Gruijter](https://community.homey.app/u/RM_de_Gruijter)\ **Post date:** [November 11, 2026, 2:50pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/317 "2026-11-11T14:50:52Z")
v3.1.1 is ready for testing: > **[Growatt | Homey](https://homey.app/en-us/app/com.growatt/test/)** > > Smart energy for a green future. - Added export limit and grid charging for batteries in VPP mode - Fixed min SoC on newer MIN TL-XH firmware - Retry on Modbus timeouts - Minor other fixes and improvements ---
**Author:** ![SebastiaanB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sebastiaanb/32/124174_2.png) [@SebastiaanB](https://community.homey.app/u/SebastiaanB)\ **Post date:** [November 11, 2026, 3:48pm UTC](https://community.homey.app/t/app-pro-cloud-official-growatt/134233/318 "2026-11-11T15:48:07Z")
Glad I could help! Thanks for taking the time to add new functions and fix things 🥳 [Previous page](https://community.homey.app/t/app-pro-cloud-official-growatt/134233.md?page=15)