# \[APP\]\[Pro\]\[Cloud\] KNMI **URL:** \ **Category:** Apps\ **Tags:** app, official, homey-pro, homey-bridge, homey-service\ **Created:** [August 6, 2023, 5:48am UTC](https://community.homey.app/t/app-pro-cloud-knmi/86268 "2023-08-06T05:48:37Z")\ **Posts on this page:** 2\ **Page:** 33
**Author:** ![LRvdLinden](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lrvdlinden/32/80786_2.png) [@LRvdLinden](https://community.homey.app/u/LRvdLinden)\ **Post date:** [October 12, 2026, 5:37am UTC](https://community.homey.app/t/app-pro-cloud-knmi/86268/650 "2026-10-12T05:37:34Z")
## 📦 **v4.2.3** ## **New _Live_ version!** * * * ### Fixed ⚡ **Device Triggers Working Again** : All “… changed” trigger cards of the KNMI device (such as current temperature, wind speed, weather alert, forecasts and weather recaps) were not firing in 4.2.x. All 90 device triggers are registered again and fire whenever the value changes. 🌡 **Current Temperature Trigger Title Fixed** : The Dutch title of the current temperature trigger read “Huidige temperatuureratuur is veranderd” and now correctly reads “Huidige temperatuur is veranderd”. 📝 **Flow Card Titles Corrected** : Several trigger titles were wrong or identical. The maximum temperature day after tomorrow no longer says “min”, the wind speed (meters per second) day after tomorrow no longer says “kilometers per hour”, and the weather recap triggers for the day after tomorrow, day 4 and day 5 now show which day they belong to. 🌐 **Server Online/Offline Triggers Fixed** : The **Server online** trigger never fired and **Server offline** fired every 10 minutes during an outage, with a notification every time. Both now fire once, only when the server status really changes. 🌡 **Temperature & Wind Speed Conditions Fixed** : The conditions for current temperature, feels-like temperature and wind speed now also work with `0` (0 °C used to always be “true”) and with decimal values. Entering `21` matches 20.5 up to 21.4. 📱 **Conditions Per Device** : All condition cards now check the KNMI device you select in the Flow, so they also work correctly when you have more than one KNMI device. ☁ **“Slightly Cloudy or Clear” Condition Fixed** : The condition now uses the KNMI weather icon codes and also recognises a clear night, so it works reliably for now and for every forecast day. 📍 **Changing the Place Fixed** : After changing the place in the device settings, KNMI immediately fetches the weather for the new place instead of the old one. 🛡 **Safer Trigger Values** : On the first update after installing or updating, triggers no longer fail on an empty old value. ### Improvement 📝 **Consistent Flow Card Titles** : All English and Dutch trigger and condition titles have been written out consistently (“Expected maximum temperature tomorrow changed”, “Verwachte windsnelheid (knopen) dag 4 is veranderd”). Existing Flow card IDs are unchanged, so your Flows keep working. 🌐 **Dutch Titles for Server Triggers** : The server online/offline triggers now also have a Dutch title. 🔧 **Under-the-Hood Enhancements** : In this version of **KNMI** , we’ve improved Flow card registration, condition handling, error handling and logging. We’re continuously working behind the scenes to fine-tune the app for the best possible user experience. Your feedback is invaluable! If you encounter any issues or have suggestions, feel free to reach out through our support channels. * * * 🌟 Enjoy the improved **KNMI** v4.2.3! 🚀 🌦 **[Download the new version in the Homey App Store!](https://homey.app/a/nl.lrvdlinden.knmi-weerwaarschuwing/test/)** * * * 💥 If you find any **issues** , send a **diagnostic report** > ⚠ Note: Before sending a report make sure to reproduce the issue so the issue will be visible in the report > > 1. 📱 Via **Homey Mobile app:** > More - apps - KNMI - settings wheel right top - send diagnostic report (put your email in the input field to make it easier) > 2. 💻 Via **Homey Webapp:** > Settings wheel bottom left - Select KNMI - Click on send diagnostic report * * * ## Changelog > **[KNMI changelog](https://headwayapp.co/knmi-changelog)** > > KNMI changelog * * * **🚨 Disclaimer 🚨** This app is a labor of love, provided on a best-effort basis. No rights can be derived from its use. Data made possible by **[weerlive.nl](https://weerlive.nl)** ![knmi_partner](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/6/b6fa138642c790e66fb36467d0ed4a17606f3653.png) * * * > 💻 Apps made by @LRvdLinden * * * ## Contribution If you appreciate this app, fuel future development with a [PayPal contribution](https://lrvdlinden.app/donate.html), buy a round with [iDeal](https://lrvdlinden.app/donate.html) or [Bunq.me](https://lrvdlinden.app/donate.html). Your support keeps the magic alive! ✨🚀 ---
**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\ **Post date:** [October 12, 2026, 6:59am UTC](https://community.homey.app/t/app-pro-cloud-knmi/86268/651 "2026-10-12T06:59:16Z")
Thanks for fixing the trigger cards! @Icube0815: To answer my own question to you: you cannot use the ‘New Value’ tag that the ‘KNMI data had changed’ card provides. That tag (and the Old Value tag) contains the timestamp of the new resp. prior set of KNMI data. ![IMG_6257](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/f/0fb03c6aba76fe2d5d445cbf0ed99f2db999125d.jpeg) So you’ll need to use the Current Temperature tag (as indicated before) or use the corresponding trigger card (current temperature has changed) with the associated New Value tag. ![IMG_3070](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/a/ca30bddb2ac62093537b14d8263cc9fa6610996d.jpeg) [Previous page](https://community.homey.app/t/app-pro-cloud-knmi/86268.md?page=32)