# \[APP\]\[Pro&Cloud\] frient Zigbee App (v2.5.4) **URL:** \ **Category:** Apps\ **Tags:** app, zigbee, flow, homey-pro, homey-bridge\ **Created:** [February 8, 2023, 9:47am UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161 "2023-02-08T09:47:45Z")\ **Posts on this page:** 20\ **Page:** 23
**Author:** ![frient](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frient/32/68875_2.png) [@frient](https://community.homey.app/u/frient)\ **Post date:** [November 12, 2025, 9:17am UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/451 "2025-11-12T09:17:46Z")
Hi. I believe this is a valid question; however, I believe the Heimdall app developer would be a better target for proposing this new feature. ---
**Author:** ![frient](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frient/32/68875_2.png) [@frient](https://community.homey.app/u/frient)\ **Post date:** [November 12, 2025, 9:18am UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/452 "2025-11-12T09:18:27Z")
Can you describe a bit more detailed on what’s going on? Also, you refer to “develco / frient”, but which app do you use? frient app or Develco Products app? ---
**Author:** ![pbianchi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pbianchi/32/78942_2.png) [@pbianchi](https://community.homey.app/u/pbianchi)\ **Post date:** [November 19, 2025, 10:54am UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/453 "2025-11-19T10:54:51Z")
Hi all, I have installed an intelligent keypad. It works very well in combination with Heimdall. Only thing, its battery level displayed in Homey is unknown, i.e. a question mark “?” is displayed. Some suggestions on how to make it display correctly? Thank you in advance for your kind help ---
**Author:** ![krl69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krl69/32/21560_2.png) [@krl69](https://community.homey.app/u/krl69)\ **Post date:** [November 20, 2025, 9:59am UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/454 "2025-11-20T09:59:40Z")
```auto I just added a siren but it's stuck on this with an exclamation point. I have also run the standard routine of resetting the device by holding the button down for 15 seconds. Severalt times. ``` ![Skjermbilde 2025-11-20 105544](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/c/dc8c6bbf1341f2b805e279d421a59b8212e54b2c.jpeg) ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [November 20, 2025, 12:28pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/455 "2025-11-20T12:28:40Z")
@krl69 An update to the Frient app will be released today (evening) that will solve this issue. ---
**Author:** ![krl69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krl69/32/21560_2.png) [@krl69](https://community.homey.app/u/krl69)\ **Post date:** [November 20, 2025, 1:04pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/456 "2025-11-20T13:04:26Z")
Nice, thanx! ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [November 20, 2025, 8:05pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/457 "2025-11-20T20:05:32Z")
The initialization issues should be fixed with the release of 2.6.4 version of the Frient app. The cause of the issue was not related to the latest app update, but triggered by a change in Homey SW (12.8.2), which was released to stable a few days ago. ---
**Author:** ![krl69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krl69/32/21560_2.png) [@krl69](https://community.homey.app/u/krl69)\ **Post date:** [November 30, 2025, 5:19pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/459 "2025-11-30T17:19:35Z")
> > [@TedTolboom](#): > > The initialization issues should be fixed with the release of 2.6.4 version of the Frient app. > > The cause of the issue was not related to the latest app update, but triggered by a change in Homey SW (12.8.2), which was released to stable a few days ago. Great, now it works as it should. But I have created a flow that triggers an alarm. Set it to beep for 60 minutes if a water leak occurs. But if I press the button on the siren itself, it doesn’t stop. Or is there a special way to press the button on the siren, e.g. by holding it down for x number of seconds or double-pressing etc. to make it stop? ---
**Author:** ![Mark1541](https://avatars.discourse-cdn.com/v4/letter/m/838e76/32.png) [@Mark1541](https://community.homey.app/u/Mark1541)\ **Post date:** [December 23, 2025, 8:23pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/460 "2025-12-23T20:23:46Z")
All my smoke detectors no longer indicate temperature. Furthermore, they work and have connection Anyone have an idea? c9e5cbc9-1411-42bb-b27f-0b0415c4d431 @frient @TedTolboom Also one smoke alarm was losing his connection but I can’t read it ![IMG_1044](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/6/e6fd4e0e4e3de6b669b8e2c8183d3a04c29659a7.jpeg) ---
**Author:** ![Blooddrunk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/blooddrunk/32/82094_2.png) [@Blooddrunk](https://community.homey.app/u/Blooddrunk)\ **Post date:** [December 28, 2025, 11:41am UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/461 "2025-12-28T11:41:42Z")
![IMG_2833](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/2/2238f557fbc5a00e23c36da122f04e2f38507908.jpeg) After months of using, all of the sudden, electricity meter left the zigbee network. Anybody experienced same issue these days? What might be the reason? Week batteries? Thanks for the reply. ---
**Author:** ![Hans\_Eisink](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hans_eisink/32/12916_2.png) [@Hans\_Eisink](https://community.homey.app/u/Hans_Eisink)\ **Post date:** [December 29, 2025, 5:14pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/462 "2025-12-29T17:14:59Z")
@frient Hi I love my new Frient Motion Sensor Pro. I use it in combination with my Homey. Is it possible to adjust the sensitivity of the motion sensor? I appreciate your answer. Kind regards. ---
**Author:** ![Blooddrunk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/blooddrunk/32/82094_2.png) [@Blooddrunk](https://community.homey.app/u/Blooddrunk)\ **Post date:** [January 15, 2026, 4:21pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/463 "2026-01-15T16:21:54Z")
The sensor has disconnected again. However, I noticed that despite the error message stating that the sensor left the Zigbee network, it seems to reconnect on its own and update data normally. All flows dependent on this data are still working. The issue seems to be that the sensor does not support the rejoin/reconnect function properly. Every time it disconnects, it throws this error message and cannot be reconnected using the re-pair function; it has to be fully reset. Is there any way to fix this, or could you please take a look at it? Thank you in advance for your help. ---
**Author:** ![Blooddrunk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/blooddrunk/32/82094_2.png) [@Blooddrunk](https://community.homey.app/u/Blooddrunk)\ **Post date:** [January 20, 2026, 5:07pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/464 "2026-01-20T17:07:27Z")
Well, is support for official Homey app already dead? @frient@Doekse ---
**Author:** ![Doekse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/doekse/32/109415_2.png) [@Doekse](https://community.homey.app/u/Doekse)\ **Post date:** [January 20, 2026, 5:21pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/465 "2026-01-20T17:21:34Z")
Did you already try to get in touch with the developer of the app / reporting this bug to them? 😄 ---
**Author:** ![Blooddrunk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/blooddrunk/32/82094_2.png) [@Blooddrunk](https://community.homey.app/u/Blooddrunk)\ **Post date:** [January 20, 2026, 5:48pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/466 "2026-01-20T17:48:27Z")
Well, isn’t this forum supposed to serve as a connection point between users and developers? Since more users are reporting bugs and errors, I would expect someone to take care of them. Not to mention that most Frient products are recommended as top choices to buy. ---
**Author:** ![Doekse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/doekse/32/109415_2.png) [@Doekse](https://community.homey.app/u/Doekse)\ **Post date:** [January 20, 2026, 6:04pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/467 "2026-01-20T18:04:12Z")
This is the Homey Community Forum, it can indeed serve as a place where developers, users, and Homey employees can meet and exchange ideas. However, it’s not an official support channel. For issues like this, it’s best to contact the developer directly via the [Support](mailto:homey@frient.com) section linked on the app’s page in the Homey App Store 😉 For issues with the devices itself it of course might be easiest to reach out directly to frient support directly. ---
**Author:** ![Abdul\_786](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/abdul_786/32/79236_2.png) [@Abdul\_786](https://community.homey.app/u/Abdul_786)\ **Post date:** [February 24, 2026, 10:33pm UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/468 "2026-02-24T22:33:16Z")
Hey. Need help with how you connected Keypad to Heimdall. Could you help me? 🙂 ---
**Author:** ![Oyvind\_Lilleberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oyvind_lilleberg/32/140892_2.png) [@Oyvind\_Lilleberg](https://community.homey.app/u/Oyvind_Lilleberg)\ **Post date:** [March 5, 2026, 8:38am UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/469 "2026-03-05T08:38:05Z")
> [@frient](#): > > Hej Knut. At the moment, we don’t maintain the devices branded as Develco Products on Homey, and therefore, Develco Products app on Homey. > > The reason for it is that these devices were never really meant to be used with a third-party gateways such as Homey, and the number of customers actually using it this way is really low. > > However, I’ll see if that would be possible to make them use frient app - I’ll come back to you on this. Hi, what is the status about this? I have some ZPLZB-131 mini plugs that is branded as Develco, but I’m having issues with connection them through the Develco app in Homey. Suspect it is because the app haven’t been updated in 4 years. ---
**Author:** ![Oystein\_Schjetne](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oystein_schjetne/32/158931_2.png) [@Oystein\_Schjetne](https://community.homey.app/u/Oystein_Schjetne)\ **Post date:** [April 7, 2026, 9:28am UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/470 "2026-04-07T09:28:48Z")
Hi @AxelS Did you get this to work with the Frient IO module as “the man in the middle”? I have the same Watergard+ Linkbox+ (Abra) and want to integrate it in my Homey setup but unfortunately there is no app for the Linkbox+. (It has Bacnet/IP and API functions but since it’s an competitive product it’s probably not going to be integrated by any official developer..) Did you have to use two Frient IO modules and have one talking to Homey and one talking to Linkbox+ or are you able to read\control the IO status on Homey directly from the one connected with Linkbox? ---
**Author:** ![djvagnetti](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/djvagnetti/32/124744_2.png) [@djvagnetti](https://community.homey.app/u/djvagnetti)\ **Post date:** [April 9, 2026, 10:51am UTC](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161/471 "2026-04-09T10:51:34Z")
I grabbed a FRIENT heat alarm and a smoke sensor, and it has been a real struggle. Unless there is something that I don’t know, these are the worst devices I have seen so far. At least they have alarms, so they are not completely useless and can be used as dumb sensors… any help would be very much appreciated…I’ve had 0 success PAIRING THEM! [Previous page](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161.md?page=22) [Next page](https://community.homey.app/t/app-pro-cloud-frient-zigbee-app-v2-5-4/76161.md?page=24)