# \[APP\]\[Pro\] Candlelight

**URL:** <https://community.homey.app/t/app-pro-candlelight/146172>\
**Category:** Apps\
**Tags:** app, infrared, homey-pro, ir\
**Created:** [November 30, 2025, 10:23am UTC](https://community.homey.app/t/app-pro-candlelight/146172 "2025-11-30T10:23:52Z")\
**Posts on this page:** 1\
**Showing post:** 18

<div class="post-metadata">

**Author:** ![StephanSchuurman](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stephanschuurman/32/145337_2.png) [@StephanSchuurman](https://community.homey.app/u/StephanSchuurman)\
**Post date:** [January 7, 2026, 5:57pm UTC](https://community.homey.app/t/app-pro-candlelight/146172/18 "2026-01-07T17:57:43Z")

</div>

Hi René,

Thanks for the swift testing and your reply.

Action 3-button remote  
It looks like there was a mix-up in the command codes, while I kept the address at 0x00. To verify this, I installed the JTECH-8X8-H20 driver and performed a read-back using a Flipper. I found the following mappings:

- ON → J-Tech Key W (NEC command **0x46** )
- OFF → J-Tech Output 8 (NEC command **0x15** )
- TIMER 6H → J-Tech Input All (NEC command **0x18** )

For the [next (test) version](https://homey.app/en-nl/app/com.stephanschuurman.candlelight/Candlelight/test/), I’ll try to add a dedicated test remote driver with the action flow cards so all NEC options can be send.

Action 8-button remote  
Since I don’t yet know the IR codes for the other commands, I wasn’t able to add those. However, I think this is still less confusing than reusing the HEMA driver for these remotes.

Thanks again for the feedback — definitely constructive and not taken as criticism in any way.

By the way, did you run into any issues when adding flow cards? [Another user mentioned this](https://community.homey.app/t/universele-infrarood-afstandsbediening-candle/111861/34), but I can’t reproduce it on my end.

Regards,  
Stephan

---

_[View the full topic](https://community.homey.app/t/app-pro-candlelight/146172)._