# \[APP\]\[Pro\] Broadlink App **URL:** \ **Category:** Apps\ **Tags:** app\ **Created:** [January 6, 2019, 12:37pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389 "2019-01-06T12:37:15Z")\ **Posts on this page:** 1\ **Showing post:** 565
**Author:** ![Niklas70](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niklas70/32/136814_2.png) [@Niklas70](https://community.homey.app/u/Niklas70)\ **Post date:** [May 17, 2024, 8:51am UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/565 "2024-05-17T08:51:40Z")
I tried the version on GitHub and made an CLI install on my Homey Pro 2023. I managed to get my RM Mini 3 to work - but you can’t change the names of the RC commands, but you can live with that, just note which is which. As for my RM Pro, it got harder. Installed it as a Pro Plus (which the app wanted), then it was possible to save IR codes, but not use them (gets an error with something wrong in an array or whatever it was). Changed the app settings to install what I want it to be (Compabillity Mode), well, finally an RM Pro - got the same problem. Finally, I tried selecting RM Mini 3 for my RM Pro - then it worked. But you cannot rename the RC commands, but you can create flows where you enter which RC sends which IR signal, and you can not use RF. So with a lot of work I got it working decently, not perfect but enough to be able to use both the RM Mini 3 and the RM pro on my Homey Pro (2023)! And then one can hope that a real app will appear in the future. How to do a CLI install: > [@\[HOW TO\] CLI install method](https://community.homey.app/t/how-to-cli-install-method/198): > > Homey Pro only!!! It does not work this way with Homey (cloud), it only supports CLI run which is there only for development purposes. Installing Node.js Check Node.js version on Homey: Homey App: Settings - General - About - Node.js version Download Node.js (use Homey’s version or higher) from [https://nodejs.org/](https://nodejs.org/) and install it on your computer. Download the app you want to install from GitHub Go to the repository on [GitHub](https://github.com/) (the correct link for the app you want to install is at the bottom… The app on GitHub: > **[GitHub - fkmeland/com.broadlink at feature/homey-sdk3-migration](https://github.com/fkmeland/com.broadlink/tree/feature/homey-sdk3-migration)** > > Add support for Broadlink devices in Homey (by AthomBV) - GitHub - fkmeland/com.broadlink at feature/homey-sdk3-migration --- _[View the full topic](https://community.homey.app/t/app-pro-broadlink-app/6389)._