# \[APP\]\[Pro\] Broadlink App **URL:** \ **Category:** Apps\ **Tags:** app\ **Created:** [January 6, 2019, 12:37pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389 "2019-01-06T12:37:15Z")\ **Posts on this page:** 20\ **Page:** 41
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [January 17, 2026, 9:56pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/820 "2026-01-17T21:56:51Z")
Have you unlocked your RM3 Mini in the Broadlink app ? ---
**Author:** ![Killerbert](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/killerbert/32/109031_2.png) [@Killerbert](https://community.homey.app/u/Killerbert)\ **Post date:** [January 17, 2026, 9:58pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/821 "2026-01-17T21:58:21Z")
Yes, I just added that in the message ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [January 17, 2026, 10:06pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/822 "2026-01-17T22:06:18Z")
Do you use static IP, have you unlocked it before or after adding it into Homey ? Your Homey and Broadlink is on the same VLAN ? If no, can you assign static and re-add to Homey, if that would work? There are few users of 5F36 / Red Bean RM3 Mini edition, but haven’t heard any issue for maybe a year… sorry, no other ideas. ---
**Author:** ![Killerbert](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/killerbert/32/109031_2.png) [@Killerbert](https://community.homey.app/u/Killerbert)\ **Post date:** [January 17, 2026, 10:27pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/823 "2026-01-17T22:27:32Z")
**This is the solution.** Thanks for pointing me on it. Turn in the Broadlink app the option “Lock device” off. In Homey, you can add the Broadlink device If its not done in this order, remove the “Broadlink device” from Homey. After that, you can add it again. Then it will work. 😀 ---
**Author:** ![Richard\_Coates](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_coates/32/123116_2.png) [@Richard\_Coates](https://community.homey.app/u/Richard_Coates)\ **Post date:** [January 18, 2026, 9:43am UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/824 "2026-01-18T09:43:54Z")
thank you so mutch that helps just need to now wy it just keeps on stopping ---
**Author:** ![Richard\_Coates](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_coates/32/123116_2.png) [@Richard\_Coates](https://community.homey.app/u/Richard_Coates)\ **Post date:** [January 18, 2026, 9:45am UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/825 "2026-01-18T09:45:07Z")
thank you 😊 🙏 ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [January 18, 2026, 4:52pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/826 "2026-01-18T16:52:15Z")
YW! This is no helpful info for you right now, but the Broadlink app with RM3 mini Red Bean version, works flawless on Pro 2019 and Pro 2026. 👇 > [@Sharkys](#): > > There are few users of 5F36 / Red Bean RM3 Mini edition . > [@Richard\_Coates](#): > > I have uninstall it from homey and reinstalled it and it works ok for a day or 2 and then stops again like homey can’t send the signal to the divice I just get a time out error message To me this sounds like a DHCP issue. First of all, make sure your Broadlink device has a reserved IP address; Homey is not very good at tracking devices with a changed IP address, it seems to quit searching, or it doesn’t have the tools to find paired devices with a changed IP by itself. [https://duckduckgo.com/?q=how+to+bind+ip+to+mac+address](https://duckduckgo.com/?q=how+to+bind+ip+to+mac+address) [https://duckduckgo.com/?q=how+to+reserve+ip+address](https://duckduckgo.com/?q=how+to+reserve+ip+address) ---
**Author:** ![Esben](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/esben/32/79405_2.png) [@Esben](https://community.homey.app/u/Esben)\ **Post date:** [February 15, 2026, 11:20am UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/827 "2026-02-15T11:20:58Z")
I just wanted to say thank you so much for adding the backup/restore functionality!! I have 3 RM4C Mini that I use to control three identical AC units in three different rooms. It was a hassle to get the RM4C Minis to learn the IR codes but I managed to get it set up on two of the RM4C’s. However, for some reason the third RM4C was unable to get a proper “signal” to learn from - no matter what and where I tried to do it. Back in November, when I was setting up the RM4C’s, I ended up postponing this third unit, so I never got it to work - up until today. Today I gave it another go - it still didn’t want to learn properly. But then I saw the backup/restore functionality. I then copied the JSON code from one of the working units, renamed the commands to reflect the room and pasted it into the restore section for the third RM4C Mini and saved. Now it works flawlessly! Thanks!! A small suggestion: Editing the JSON worked for me, but if there was some form of interface for copying commands from other identical devices, that would probably make it even more accessible. ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [February 15, 2026, 1:51pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/828 "2026-02-15T13:51:57Z")
> [@Esben](#): > > RM4C’s, I ended up postponing this third unit, so I never got it to work. Check static IP, firmware version and if it’s not locked in the Broadlink mobile app. Also unit reset could work ---
**Author:** ![The\_cure\_Bob](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/the_cure_bob/32/80551_2.png) [@The\_cure\_Bob](https://community.homey.app/u/The_cure_Bob)\ **Post date:** [February 20, 2026, 2:35pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/829 "2026-02-20T14:35:27Z")
Hello, I have a problem to make this app work. I have a homey pro 2023, a rm pro + Static IP on homey and broadlink, and the broadlink app on the phone is well unlocked I integrated my remote control well into my broadlink, my TV is well controlled by my phone, I integrated the applink well on homey and do the learning of the controls by my phone, the homey created me my CMD. But during my flows, impossible to drive my TV, I looked well at the broad light of malink, and it turns on well when sending the signal, but my TV does not react. Could I get help? Thank you in advance ![parametre broadlink](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/0/c057377ab50cd2aa6f7efc69b3618031bbfee083.png) ![flow tv](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/5/25267aac65270fa55e05cc889abf9b72bfa084a1.png) Attached copies of screen ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [February 20, 2026, 2:50pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/830 "2026-02-20T14:50:19Z")
Try with some other device then the TV,to check if the signals are learned correctly. ---
**Author:** ![Jon\_Hye-Knudsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jon_hye-knudsen/32/120768_2.png) [@Jon\_Hye-Knudsen](https://community.homey.app/u/Jon_Hye-Knudsen)\ **Post date:** [February 27, 2026, 5:04pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/831 "2026-02-27T17:04:32Z")
I can’t seem to get my new RM5 plus into learning mode in Homey. It works fine in the broadlink app. diag: 5cb9236f-81b2-4130-bc87-2d455d4fb7b5 ---
**Author:** ![Jon\_Hye-Knudsen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jon_hye-knudsen/32/120768_2.png) [@Jon\_Hye-Knudsen](https://community.homey.app/u/Jon_Hye-Knudsen)\ **Post date:** [February 28, 2026, 6:13am UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/832 "2026-02-28T06:13:58Z")
So what was missing was unlocking the RM5 plus. I looked for the toggle in the Broadlink iOS app, but it just wasn’t there. I ended up resetting the RM5 and then configuring it to a different WIFI in the Broadlink iOS app. Then I reset it again and starting the configuration again in the Broadlink iOS app, only to intentionally not finishing it. Do not complete the adding it to a room. It will have updated the WiFi connection but still be unlocked by then. Finally configure it as a new device in Homey. It took a few tries and pushing the reset button in the RM5 for 5 seconds seemed to be my friend when nothing seemed to react or connect. ---
**Author:** ![Jasper\_Meijrink](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jasper_meijrink/32/29849_2.png) [@Jasper\_Meijrink](https://community.homey.app/u/Jasper_Meijrink)\ **Post date:** [March 17, 2026, 6:41pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/833 "2026-03-17T18:41:50Z")
I have a Broadlink RM4 Pro, i see firmware V62093. The learning-buttons doesn’t work. I have to downgrade the firmware, but i don’t know how. I just want to make flows with the devices i still have in the Broadlink-app. Please help me to get it worked. 🙂 ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [March 17, 2026, 6:47pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/834 "2026-03-17T18:47:57Z")
> [@Jasper\_Meijrink](#): > > I have to downgrade the firmware, but i don’t know how > [@Sharkys](#): > > **!!! RM4 Pro !!!** users must update/downgrade to 62092 version in case the Homey integration do not work - [http://124.71.130.238/RMBL4-62092-8720-BL-FC-3389.upd.bin](http://124.71.130.238/RMBL4-62092-8720-BL-FC-3389.upd.bin) based on [Reddit - Dive into anything](https://www.reddit.com/r/homebridge/comments/1181ex4/caution_to_people_using_broadlink_rm_plugin/) - Have you checked those links ? ---
**Author:** ![Jasper\_Meijrink](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jasper_meijrink/32/29849_2.png) [@Jasper\_Meijrink](https://community.homey.app/u/Jasper_Meijrink)\ **Post date:** [March 17, 2026, 7:00pm UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/835 "2026-03-17T19:00:40Z")
Yup, but i restarted the app in Homey, en now it works, just with firmware V62093! ---
**Author:** ![Eduardo\_Rodriguez](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eduardo_rodriguez/32/1902_2.png) [@Eduardo\_Rodriguez](https://community.homey.app/u/Eduardo_Rodriguez)\ **Post date:** [May 4, 2026, 7:49am UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/836 "2026-05-04T07:49:56Z")
Is there any way to view the RF codes stored in the application? ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 4, 2026, 8:01am UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/837 "2026-05-04T08:01:58Z")
Not sure what do you mean by RF Codes. But commands are visible in the settings of the device + you should see also JSON of stored signals. ---
**Author:** ![Eduardo\_Rodriguez](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eduardo_rodriguez/32/1902_2.png) [@Eduardo\_Rodriguez](https://community.homey.app/u/Eduardo_Rodriguez)\ **Post date:** [May 4, 2026, 8:04am UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/838 "2026-05-04T08:04:54Z")
I don’t quite remember how I memorized the codes for my extractor fan a few years ago, but I have them stored in Homey but not in the Broadlink Android app (RM Pro+). I’d like to copy them to use them in Home Assistant as well. ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 4, 2026, 8:08am UTC](https://community.homey.app/t/app-pro-broadlink-app/6389/839 "2026-05-04T08:08:23Z")
It’s not possible to copy them over in this case, JSON is intended only as a backup for Homey integration itself. [Previous page](https://community.homey.app/t/app-pro-broadlink-app/6389.md?page=40) [Next page](https://community.homey.app/t/app-pro-broadlink-app/6389.md?page=42)