# \[APP\]\[Pro\] BleBox **URL:** \ **Category:** Apps\ **Tags:** app, wifi, homey-pro\ **Created:** [October 25, 2022, 5:55pm UTC](https://community.homey.app/t/app-pro-blebox/71173 "2022-10-25T17:55:38Z")\ **Posts on this page:** 9\ **Page:** 13
**Author:** ![rh\_rh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rh_rh/32/35144_2.png) [@rh\_rh](https://community.homey.app/u/rh_rh)\ **Post date:** [March 30, 2026, 12:54pm UTC](https://community.homey.app/t/app-pro-blebox/71173/242 "2026-03-30T12:54:02Z")
Thanks! I managed to add the lux sensor. However, I noticed something with both the lux and humidity sensors: I can’t change the device names or adjust any other configurations (like assigning them to zones). Whenever I try to rename a device, it reverts back to the original name almost instantly—even while I’m still typing. It’s as if the device refreshes every second and overwrites any new input with the old values. ---
**Author:** ![Piotr\_Grochowski](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/piotr_grochowski/32/9530_2.png) [@Piotr\_Grochowski](https://community.homey.app/u/Piotr_Grochowski)\ **Post date:** [March 30, 2026, 1:15pm UTC](https://community.homey.app/t/app-pro-blebox/71173/243 "2026-03-30T13:15:56Z")
It shouldn’t be connected to my app, it’s not doing anything like that in the code. But I’ve had some time ago the problem you mention - I had to restart the App (or homey - I don’t remember) to have it working properly. I had the same problem with many devices and apps at that moment. ---
**Author:** ![rh\_rh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rh_rh/32/35144_2.png) [@rh\_rh](https://community.homey.app/u/rh_rh)\ **Post date:** [April 9, 2026, 5:00am UTC](https://community.homey.app/t/app-pro-blebox/71173/244 "2026-04-09T05:00:16Z")
Are the lux and humidity sensors supported in the official app by now, or is support still limited to the experimental app? I would like to switch back to the official version as soon as possible. ---
**Author:** ![Piotr\_Grochowski](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/piotr_grochowski/32/9530_2.png) [@Piotr\_Grochowski](https://community.homey.app/u/Piotr_Grochowski)\ **Post date:** [April 9, 2026, 5:50am UTC](https://community.homey.app/t/app-pro-blebox/71173/245 "2026-04-09T05:50:26Z")
Yes, it’s also in the stable version. ---
**Author:** ![PeterHa](https://avatars.discourse-cdn.com/v4/letter/p/94ad74/32.png) [@PeterHa](https://community.homey.app/u/PeterHa)\ **Post date:** [June 9, 2026, 8:20pm UTC](https://community.homey.app/t/app-pro-blebox/71173/246 "2026-06-09T20:20:35Z")
Hi Priotr, I ordered a ProxiBox and tested it with your app. It works great, thanks for this app!! I would have 2 more suggestions for new cards for the ProxiBox: – An AND card would be great to check if the ProxiBox has just detected an activation, e.g. when switch is pressed AND Proxibox has detected movement THEN… – and a WENN card as soon as no activation is detected And what can I do with these cards? I have no idea what to do with it, but that’s because of my English. 🙂 – Falling edge has been detected on input – Rising edge has been detected on input ---
**Author:** ![Piotr\_Grochowski](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/piotr_grochowski/32/9530_2.png) [@Piotr\_Grochowski](https://community.homey.app/u/Piotr_Grochowski)\ **Post date:** [June 10, 2026, 11:14am UTC](https://community.homey.app/t/app-pro-blebox/71173/247 "2026-06-10T11:14:02Z")
Hello, The proxiBox driver does not “remember” the action that has been made before. So there is no way for making AND proxBox has “JUST” detected an activation. What would mean “JUST”? 100ms, 500ms or 2s? If you need that you can achieve that with logic. If there is an action triggered by Proxibox - remember it in some variable and e.g. with Countdown app you can set how long should this variable be set for a specific value. Regarding falling edge and rising edge → these are the exact actions defined in proxiBox and seen in wBox app. With proxiBox the rising edge I believe is when someone brings hand over Proxibox and falling edge - when someone takes the hand out of Proxibox reach - I think. But it needs testing, I’m not sure. ---
**Author:** ![PeterHa](https://avatars.discourse-cdn.com/v4/letter/p/94ad74/32.png) [@PeterHa](https://community.homey.app/u/PeterHa)\ **Post date:** [June 10, 2026, 2:35pm UTC](https://community.homey.app/t/app-pro-blebox/71173/248 "2026-06-10T14:35:07Z")
Thanks for the quick feedback, appreciate that. Isn’t it the same as PixelBox, rainSensor, flootSensor, or others? For these devices there is also an AND card with the current status. In the proxiBox, the blue LED then lights up. Yes, a variable is also possible, of course, but within the app it would be a bit easier. 😀 Thanks for the explanation, then I will test with the falling and rising edge, maybe I can replace a WENN card if no more touch is registered.👍 ---
**Author:** ![Piotr\_Grochowski](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/piotr_grochowski/32/9530_2.png) [@Piotr\_Grochowski](https://community.homey.app/u/Piotr_Grochowski)\ **Post date:** [June 10, 2026, 4:48pm UTC](https://community.homey.app/t/app-pro-blebox/71173/249 "2026-06-10T16:48:24Z")
No, sensors are totally different devices with different APIs - they constantly provide actual value as measured. proxiBox and actionBox have different API - which just provides actions when something happens with them. ---
**Author:** ![PeterHa](https://avatars.discourse-cdn.com/v4/letter/p/94ad74/32.png) [@PeterHa](https://community.homey.app/u/PeterHa)\ **Post date:** [June 11, 2026, 4:08pm UTC](https://community.homey.app/t/app-pro-blebox/71173/250 "2026-06-11T16:08:06Z")
ah ok, understood. Thanks for clarification [Previous page](https://community.homey.app/t/app-pro-blebox/71173.md?page=12)