# \[App\]\[Pro\] Blauberg Vento Fans
**URL:** https://community.homey.app/t/app-pro-blauberg-vento-fans/111339
**Category:** Apps
**Created:** [June 10, 2024, 10:33pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339 "2024-06-10T22:33:41Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [June 10, 2024, 10:33pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/1 "2024-06-10T22:33:42Z")
Hi all,
Creating this post to create a forum to discuss and ask for support of my new Blauberg Vento Fan control app.
**Features**
- Full control over LAN, not cloud required
- Control of Modes, Speed and Timers
- Settings of the device, like the Humidity boost trigger
- Measurements like Fan RPM and current Humidity
- Alarms like Device alarm, filter alarm, Boost active
Together with my wifi enabled LG airco units it can really help to control Supply or Regeneration modes as soon as the airco kicks in for example.
**Note**
Local communication is protection by the device pin on each FAN. Make sure you know yours or reset them using the Blauberg Home app on your phone.
**Vento Series**
- Vento Expert A30 W V.2
- Vento Expert A50-1 W V.2
- Vento Expert A85-1 W V.2
- Vento Expert A100-1 W V.2
- Vento Expert Duo A30-1 W V.2
- VENTO Style
- VENTO inHOME 100
- VENTO inHOME 160
**HRV Wi-Fi Series**
- Heat recovery ventilators with 5 speed modes
- CO2, VOC, humidity, and temperature sensors
- Heater control and frost protection
- Compatible with Breezy 160/200 and Breezy Eco 160/200
**Smart Wi-Fi Series**
- Smart Wi-Fi fans with battery-powered operation
- Features humidity, temperature, and motion sensors
- Silent mode and interval ventilation support
**Compatible Brands**
This app might also work with other brands that use the same OEM platform/white label source, including:
- **Flexit** , **Breezy** ventilation devices
- **EcoVent** , **Oxxify** , **TwinFresh** , **Duka**
- Other rebranded Blauberg devices using the same MODBUS protocol
> **[Blauberg Vento | Homey](https://homey.app/en-nl/app/com.blauberg.vento/Blauberg-Vento/)**
>
> Control your Vento Expert, Vento Style, and Vento inHOME Fans
---
### Author:  [@Jacques\_Derks](https://community.homey.app/u/Jacques_Derks)
#### Post date: [June 11, 2024, 7:07am UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/2 "2024-06-11T07:07:51Z")
Very nice. I am looking forward for this app so I can controle my fan by Homey.
---
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [June 11, 2024, 11:03am UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/3 "2024-06-11T11:03:19Z")
And thanks to a quick review by Homey you can go over the store now and give it a test run 🙂
---
### Author:  [@Jacques\_Derks](https://community.homey.app/u/Jacques_Derks)
#### Post date: [June 11, 2024, 3:23pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/4 "2024-06-11T15:23:18Z")
Just installed the app. Works perfect. Thank you very much.
---
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [July 8, 2024, 9:29pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/5 "2024-07-08T21:29:56Z")
Small update on the app, it now has action card support for the speed and operation modes.
---
### Author:  [@Remco\_Ploeg](https://community.homey.app/u/Remco_Ploeg)
#### Post date: [November 6, 2024, 6:16pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/6 "2024-11-06T18:16:52Z")
I have just installed the app. I can see and connect the vent to Homey successful. But when I try to control something nothing happens. I have a vento expert a50
---
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [November 6, 2024, 7:35pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/7 "2024-11-06T19:35:37Z")
Did you check the device settings and set the right device security code (as managed from the Vento mobile app?)
If you did that, please restart the Homey Blauberg app , try to control the device again and then send me a diagnostic report. I think you did, if so this is the error:
Error: device not responding, is your device password correct?
I log that error when the device fully rejects my commands, and as far as I know its the device password always.
I am working on a update for the app, so if there is a bug would be nice to include it.
However that version requires Homey Os version 2.2 and that one is not general available yet. Not sure about those timelines.
---
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [November 7, 2024, 8:21pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/8 "2024-11-07T20:21:47Z")
I just released a small update, it now supports the new Fan\_speed capability, you should not really notice except that your flow cards are now deprecated and new fan speed cards are available. This is to align with the new capabilities in Homey 2.2, and me hoping that this is a push for other controls or dashboards etc.
I also tried to fix some exceptions.
---
### Author:  [@KlankBart](https://community.homey.app/u/KlankBart)
#### Post date: [November 14, 2024, 10:15pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/9 "2024-11-14T22:15:36Z")
I just installed this app, it works great. I’m using this for the WTW in the attic. Now it’s possible to let the WTW automatically switch to blow out moisture air when the laundry is drying here. And the WTW switches back to regenerate mode when the laundry dried and the relative moisture is back to normal.
Thanks. This wasn’t possibile with the original standard app from Blauberg.
---
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [November 14, 2024, 10:55pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/10 "2024-11-14T22:55:23Z")
Nice use case, thanks for sharing. I have a classic central ventilation system next to these decentral unit, when the central system speeds up i automatically switch these to supply to prevent an unbalance.
---
### Author:  [@Dirk\_van\_der\_Heijden](https://community.homey.app/u/Dirk_van_der_Heijden)
#### Post date: [January 4, 2025, 1:11pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/11 "2025-01-04T13:11:25Z")
When do other Blauberg fan models come available in the app? I have a Blauberg Smart-WIFI fan, but I cannot connect it to my Homey Pro.
---
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [January 4, 2025, 1:28pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/12 "2025-01-04T13:28:19Z")
I have no data nor test model myself. So it is impossible to implement without that.
What app does it use from blauberg?
---
### Author:  [@Dirk\_van\_der\_Heijden](https://community.homey.app/u/Dirk_van_der_Heijden)
#### Post date: [January 4, 2025, 2:17pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/13 "2025-01-04T14:17:08Z")
Blauberg Home
---
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [January 4, 2025, 5:25pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/14 "2025-01-04T17:25:48Z")
Can you start the homey app (my blauberg app) and let it be for 5 minutes, try to add device, then once that fails send me an diagnostic report.
Ill see if it shows up
---
### Author:  [@Dirk\_van\_der\_Heijden](https://community.homey.app/u/Dirk_van_der_Heijden)
#### Post date: [January 4, 2025, 6:21pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/15 "2025-01-04T18:21:15Z")
Hey Kaoh,
I’ve done what you asked. I reïnstalled the app and the app recognized a fan. After installing it, it showed the options for a few seconds, but when I try to alter some settings, the app crashes. The report is: 1899512f-11bd-4939-a9bc-79585ffc58db
Is that enough for you to be able to look into it?
---
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [January 5, 2025, 11:49am UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/16 "2025-01-05T11:49:37Z")
thanks, the log shows indeed that I am crashing on unpacking the responses from the device.
What I would need to find a way to solve this is updated documentation from blauberg.
We used (the base code is a shared github project) the following documents:
[b133\_4\_1en\_01preview.pdf](https://blaubergventilatoren.de/uploads/download/b133_4_1en_01preview.pdf)
But these only list the Expert models not anything else.
So lets see if we can find a document from blauberg with the same connection information but that includes other devices from them
If you can find those, and give me the exact name and model of the fan you got, then I will also look for it.
It is interesting it uses the same blauberg app and is already discovered, that would make it a high change they just changed data packages on these devices.
---
### Author:  [@Dirk\_van\_der\_Heijden](https://community.homey.app/u/Dirk_van_der_Heijden)
#### Post date: [January 5, 2025, 1:42pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/17 "2025-01-05T13:42:19Z")
I think the document you need is: [https://www.ventilatieshop.com/media/ventilatieshop/downloads/b/1/b168\_1en\_01preview.pdf](https://www.ventilatieshop.com/media/ventilatieshop/downloads/b/1/b168_1en_01preview.pdf)
It is in Dutch, but Maybe I can find a English language PDF if you need it.
---
### Author:  [@Dirk\_van\_der\_Heijden](https://community.homey.app/u/Dirk_van_der_Heijden)
#### Post date: [January 5, 2025, 1:43pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/18 "2025-01-05T13:43:00Z")
Lol, it is in English…
---
### Author:  [@Kaoh](https://community.homey.app/u/Kaoh)
#### Post date: [January 5, 2025, 4:09pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/19 "2025-01-05T16:09:04Z")
Both work for me, and indeed that is it.
Ill study when i have time , see how big the difference is
---
### Author:  [@Dirk\_van\_der\_Heijden](https://community.homey.app/u/Dirk_van_der_Heijden)
#### Post date: [January 5, 2025, 4:49pm UTC](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339/20 "2025-01-05T16:49:16Z")
Thx for the effort!
[Next page](https://community.homey.app/t/app-pro-blauberg-vento-fans/111339.md?page=2)