# \[APP\]\[Pro\] Balboa **URL:** \ **Category:** Apps\ **Tags:** app, official, homey-pro\ **Created:** [January 5, 2022, 2:44pm UTC](https://community.homey.app/t/app-pro-balboa/57870 "2022-01-05T14:44:00Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 27, 2022, 4:15pm UTC](https://community.homey.app/t/app-pro-balboa/57870/41 "2022-01-27T16:15:50Z")
@OH2TH > [@OH2TH](#): > > In High setting the target\_temperature is updated for the device in Homey as expected. > So for the Low setting mode I would guess it would be from the other desired temp. No updates in Homey, when I change to Low temperature range. I will have a look at that. > [@OH2TH](#): > > Should the device advanced settings have configuration to tell how many pumps there are 1-3? There should always be at least on pump. And also if there are any blowers (0-3) 0 = none. Will check for these possiblities too. Next week I’m limited available for Homey development. so probably will pick this up after that. ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 27, 2022, 9:52pm UTC](https://community.homey.app/t/app-pro-balboa/57870/42 "2022-01-27T21:52:00Z")
## New app update (test: [1.2.0](https://homey.app/en-us/app/com.balboa/ControlMySpa/test)): > - NEW: add multiple pumps and blowers > - NEW: add manual update button (flowcard) > - FIX: desiredTemperature when heater mode changes @OH2TH I added the multiple blower and pump buttons. They will be added automatically if the app recognizes more than 1. Unofrtunately I can only create 1 button page. Flowcards are added too. @OH2TH @Mart_76 added the manual update button and Flowcard. Also fixed the desiredTemp icm heater mode. Please test and let me know. You can install the beta version trough the app link above * * * @OH2TH saw your issue here [Add function to set Rest/Ready Heat modes (#3) · Issues · Victor Vlasák / ControlMySpaJs · GitLab](https://gitlab.com/VVlasy/controlmyspajs/-/issues/3) Was that for the Homey app or something else ? 😃 ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 27, 2022, 9:54pm UTC](https://community.homey.app/t/app-pro-balboa/57870/43 "2022-01-27T21:54:14Z")
> [@OH2TH](#): > > The Low/High Temperature toggle would be good to have. This i’ll add later ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 28, 2022, 4:02am UTC](https://community.homey.app/t/app-pro-balboa/57870/44 "2022-01-28T04:02:22Z")
Test 1.2.0 version stops running after install and also after restarts. Diag report is 185c905d-703a-4c4b-9702-82a5e167c13b ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 28, 2022, 4:03am UTC](https://community.homey.app/t/app-pro-balboa/57870/45 "2022-01-28T04:03:37Z")
> [@martijnpoppen](#): > > @OH2TH saw your issue here [Add function to set Rest/Ready Heat modes (#3) · Issues · Victor Vlasák / ControlMySpaJs · GitLab](https://gitlab.com/VVlasy/controlmyspajs/-/issues/3) Was that for the Homey app or something else ? In away yes, then again you have the library already and can make changes independantly 😉 ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 7:44am UTC](https://community.homey.app/t/app-pro-balboa/57870/46 "2022-01-28T07:44:56Z")
## New app update (test: [1.3.0](https://homey.app/en-us/app/com.balboa/ControlMySpa/test)): > - NEW: add multiple pumps and blowers > - NEW: add manual update button (flowcard) > - FIX: desiredTemperature when heater mode changes > - NEW: add temperature range @OH2TH Fixed and also added temperature range HIGH/LOW ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 8:28am UTC](https://community.homey.app/t/app-pro-balboa/57870/47 "2022-01-28T08:28:00Z")
## New app update (test: [1.4.0](https://homey.app/en-us/app/com.balboa/ControlMySpa/test)): > - NEW: add multiple pumps and blowers > - NEW: add manual update button (flowcard) > - FIX: desiredTemperature when heater mode changes > - NEW: add temperature range > - NEW: add sensor values to sensor tab > - NEW: add setting to round the temperature values without decimals ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 28, 2022, 8:38am UTC](https://community.homey.app/t/app-pro-balboa/57870/48 "2022-01-28T08:38:09Z")
Thanks for the update. **Temperature range** - Pressing the function gives error “Missing Capability Listener: action\_temp\_range” - English translation “Temperature range” missing - Button status does change when changed from CMS mobile app. ![Screenshot_20220128-102201_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/2/32e34e02ac44b83437c017df73338d24e2557541.jpeg) **Update manual** - For usability, could return it’s state to off, when manual update completes. - Enflish translation “Manual update” might be better. **Multiple pumps** - Our spa has three pumps, and no blowers. - Doesn’t seem to recognize the pump configuration. **Trigger card: The target temperature changed** - seems that it doesn’t trigger, even when target temperature is changed in CMS mobile app, or from another flow in Homey. - I have a flow that should trigger, and then add notification to timeline about target temperature. ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 8:53am UTC](https://community.homey.app/t/app-pro-balboa/57870/49 "2022-01-28T08:53:52Z")
## New app update (test: [1.4.2](https://homey.app/en-us/app/com.balboa/ControlMySpa/test)): > - NEW: add multiple pumps and blowers > - NEW: add manual update button (flowcard) > - FIX: desiredTemperature when heater mode changes > - NEW: add temperature range > - NEW: add sensor values to sensor tab > - NEW: add setting to round the temperature values without decimals > - FIX: flowcard listener missing + language changes ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 8:55am UTC](https://community.homey.app/t/app-pro-balboa/57870/50 "2022-01-28T08:55:01Z")
> [@OH2TH](#): > > **Temperature range** > > - Pressing the function gives error “Missing Capability Listener: action\_temp\_range” > - English translation “Temperature range” missing Fixed * * * > [@OH2TH](#): > > **Update manual** > > - For usability, could return it’s state to off, when manual update completes. > - Enflish translation “Manual update” might be better. I already set the button to false, but the UI is not propagating. This worked before with other apps 😛 Seems like in the other apps this also doesn’t work. This is on Homeys side ☹ * * * > [@OH2TH](#): > > **Multiple pumps** > > - Our spa has three pumps, and no blowers. Blower removed an gets added when found > [@OH2TH](#): > > **Trigger card: The target temperature changed** > > - seems that it doesn’t trigger, even when target temperature is changed in CMS mobile app, or from another flow in Homey. > - I have a flow that should trigger, and then add notification to timeline about target temperature. This is a default Homey flowcard. So this is strange… ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 9:04am UTC](https://community.homey.app/t/app-pro-balboa/57870/51 "2022-01-28T09:04:36Z")
Discovered a small bug. Fixing it ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 9:13am UTC](https://community.homey.app/t/app-pro-balboa/57870/52 "2022-01-28T09:13:41Z")
## New app update (test: [1.4.4](https://homey.app/en-us/app/com.balboa/ControlMySpa/test)): > - NEW: add multiple pumps and blowers > - NEW: add manual update button (flowcard) > - FIX: desiredTemperature when heater mode changes > - NEW: add temperature range > - NEW: add sensor values to sensor tab > - NEW: add setting to round the temperature values without decimals > - FIX: flowcard listener missing + language changes > - FIX: add/remove pumps & blowers dynamically @OH2TH bug fixed. Dynamic pumps and blowers was not working as expected. ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 28, 2022, 9:23am UTC](https://community.homey.app/t/app-pro-balboa/57870/53 "2022-01-28T09:23:49Z")
**Temperature range** - English translation “Temperature range” missing - Status in Homey app updates ok, when mode changed in CMS App - But when changing mode from High to Low, seems to fail - - no change in CMS app, and the Homey app restores the state back to High - Changing from Low to High in Homey App works ok. ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 28, 2022, 9:28am UTC](https://community.homey.app/t/app-pro-balboa/57870/54 "2022-01-28T09:28:30Z")
**Pump state** - Pump 1 On and Off works - Pump 2 On doesn’t work, but Off works - Pump 3 On doesn’t work, but Off works Status in Homey App follows correctly Pump states when set in CMS App. ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 9:37am UTC](https://community.homey.app/t/app-pro-balboa/57870/55 "2022-01-28T09:37:20Z")
## New app update (test: [1.4.5](https://homey.app/en-us/app/com.balboa/ControlMySpa/test)): > - NEW: add multiple pumps and blowers > - NEW: add manual update button (flowcard) > - FIX: desiredTemperature when heater mode changes > - NEW: add temperature range > - NEW: add sensor values to sensor tab > - NEW: add setting to round the temperature values without decimals > - FIX: flowcard listener missing + language changes > - FIX: add/remove pumps & blowers dynamically > - FIX: translation + LOW/HIGH setting ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 9:37am UTC](https://community.homey.app/t/app-pro-balboa/57870/56 "2022-01-28T09:37:58Z")
> [@OH2TH](#): > > English translation “Temperature range” missing Fixed > [@OH2TH](#): > > But when changing mode from High to Low, seems to fail Fixed > [@OH2TH](#): > > - Pump 2 On doesn’t work, but Off works > - Pump 3 On doesn’t work, but Off works Can you send me a report for this one? ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 28, 2022, 9:48am UTC](https://community.homey.app/t/app-pro-balboa/57870/57 "2022-01-28T09:48:30Z")
Sent diag d75b81c4-9071-4f80-bf1f-376b7d649d52 Pump 1 might have the same issue, mostly pump 1 on/off works fine, but for pumps 2 and 3, pump on does not. ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 9:48am UTC](https://community.homey.app/t/app-pro-balboa/57870/58 "2022-01-28T09:48:58Z")
Thanks found it 😃 I don’t have a spa myself so doing some blind coding here 😛 ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [January 28, 2022, 9:49am UTC](https://community.homey.app/t/app-pro-balboa/57870/59 "2022-01-28T09:49:46Z")
Kinda guessed that 🙂 ---
**Author:** ![martijnpoppen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijnpoppen/32/84849_2.png) [@martijnpoppen](https://community.homey.app/u/martijnpoppen)\ **Post date:** [January 28, 2022, 9:50am UTC](https://community.homey.app/t/app-pro-balboa/57870/60 "2022-01-28T09:50:32Z")
Not that I would complain if I had one 😉 [Previous page](https://community.homey.app/t/app-pro-balboa/57870.md?page=2) [Next page](https://community.homey.app/t/app-pro-balboa/57870.md?page=4)