# \[APP\]\[Official\] Eltako - Switching on the future

**URL:** <https://community.homey.app/t/app-official-eltako-switching-on-the-future/151999>\
**Category:** Apps\
**Tags:** official, matter\
**Created:** [March 3, 2026, 1:27pm UTC](https://community.homey.app/t/app-official-eltako-switching-on-the-future/151999 "2026-03-03T13:27:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Doekse](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/doekse/32/109415_2.png) [@Doekse](https://community.homey.app/u/Doekse)\
**Post date:** [March 3, 2026, 1:27pm UTC](https://community.homey.app/t/app-official-eltako-switching-on-the-future/151999/1 "2026-03-03T13:27:13Z")

</div>

# Eltako - Switching on the future

Central topic for questions/discussing the official [Eltako App](https://homey.app/a/com.eltako/test/). You can use this topic to ask questions and share your experiences with using the app.

By using the [Eltako EOA64 EnOcean Adapter](https://www.eltako.com/en/catalog/products/1762/eoa64/), you can also connect any EnOcean device to Homey using Matter Bridge functionality. All devices will work, but these devices specifically are currently recognized by the app and will get a custom device icon:

- Motion/Brightness/Temperature sensor [FBHT55ESB-wg](https://www.eltako.com/en/catalog/products/1799/fbht55esb-wg) _(needs firmware v2.4.0)_

- Temperature/Humidity Sensor FTFSB-wg _(needs firmware v2.4.0)_

- Window/Door Contact [FTKB-wg](https://www.eltako.com/en/catalog/products/506/ftkb-wg/) _(needs firmware v2.4.0)_

- Window/Door Contact FTKE-rw _(needs firmware v2.4.0)_

- Water Leakage Sensor [FWS81](https://www.eltako.com/en/catalog/products/494/) _(needs firmware v2.4.0)_

- 2-way Pushbutton [F2T55E](https://www.eltako.com/en/catalog/products/1040/f2t55e-wg/)

- 4-way Pushbotton F4T55E

> This app is developed by @Doekse in cooperation with ELTAKO GmbH. For support use the e-mail link on the Homey App Store page. [Support Contact »](mailto:abe.haverkamp+eltako@homey.app)

> **[Eltako | Homey](https://homey.app/en-us/app/com.eltako/Eltako/test/)**
>
> Switching on the future

---

<div class="post-metadata">

**Author:** ![steve\_blomme](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/steve_blomme/32/121069_2.png) [@steve\_blomme](https://community.homey.app/u/steve_blomme)\
**Post date:** [April 27, 2026, 3:00pm UTC](https://community.homey.app/t/app-official-eltako-switching-on-the-future/151999/2 "2026-04-27T15:00:53Z")

</div>

"Hi everyone,

First of all, it’s great to see an official Eltako app for Homey!

However, I have a question regarding the **Series 14 (RS485 bus)** systems. Many of us have a full DIN-rail installation centered around the **FAM14** module. While the app seems to focus heavily on the new Series 64 (Matter) and standalone EnOcean devices, I was wondering what the roadmap is for existing Series 14 users.

Specifically:

1. Is there (or will there be) official support for the **FGW14-USB** gateway to bridge the RS485 bus directly to the Homey Pro?

2. If not, is there an alternative ‘official’ way planned to integrate the wired Series 14 actuators (like FSR14, FUD14) into Homey without replacing the hardware with Series 64?

Currently, there is a lot of uncertainty about whether the FAM14 can be reliably connected to this new app. Any clarification would be greatly appreciated!"