# \[APP\] Netatmo - Same home, just smarter. (by Athom)

**URL:** <https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360>\
**Category:** Apps\
**Tags:** app\
**Created:** [August 24, 2018, 9:01am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360 "2018-08-24T09:01:17Z")\
**Posts on this page:** 20\
**Page:** 8

<div class="post-metadata">

**Author:** ![thejs](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thejs/32/28883_2.png) [@thejs](https://community.homey.app/u/thejs)\
**Post date:** [September 13, 2020, 11:39am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/155 "2020-09-13T11:39:20Z")

</div>

As far as I can see, I’ve followed @JPe4619 's logic so far. Yes, I’ve added the “round” function that @JPe4619 mentioned in another post here. I get the same results, just without decimals, when using the “round” function.

@RoyWissenburg, did you spot the thing I did wrong? I added the pre-created “Average” variable, multiplied by a number (5), added the CO2-level, and divided by a number (6) that’s higher than the number I multiplied it with.

---

<div class="post-metadata">

**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\
**Post date:** [September 13, 2020, 11:40am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/156 "2020-09-13T11:40:08Z")

</div>

It will take some time before the value is correct, there have to be more then 6 measurements for this calculation.

---

<div class="post-metadata">

**Author:** ![thejs](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thejs/32/28883_2.png) [@thejs](https://community.homey.app/u/thejs)\
**Post date:** [September 13, 2020, 11:42am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/157 "2020-09-13T11:42:31Z")

</div>

Ah! I see. I didn’t realise that it had to adjust over time. Thank you for being so patient and helping me out. I hope that other people who struggle with this finds this.

---

<div class="post-metadata">

**Author:** ![NickvanderGraaf](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nickvandergraaf/32/2377_2.png) [@NickvanderGraaf](https://community.homey.app/u/NickvanderGraaf)\
**Post date:** [September 29, 2020, 6:59pm UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/158 "2020-09-29T18:59:53Z")

</div>

Will the natatmo doorbell also be supported in the future?

---

<div class="post-metadata">

**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\
**Post date:** [September 29, 2020, 7:25pm UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/159 "2020-09-29T19:25:59Z")

</div>

I asked about that 2 months ago, offered support during ambassador program I was in… it was considered as good idea and nothing happened since then.

---

<div class="post-metadata">

**Author:** ![Jan\_Goudriaan](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jan_goudriaan/32/11672_2.png) [@Jan\_Goudriaan](https://community.homey.app/u/Jan_Goudriaan)\
**Post date:** [September 30, 2020, 3:45pm UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/160 "2020-09-30T15:45:32Z")

</div>

Indeed that would be nice if the doorbell could be added.

---

<div class="post-metadata">

**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\
**Post date:** [October 2, 2020, 5:59am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/161 "2020-10-02T05:59:27Z")

</div>

We can start submitting request for adding new device - [https://docs.google.com/forms/d/e/1FAIpQLScPKV\_joWXvvtACKuOdvDILbAzipk8mer0H4ZfOpJEthg-ibA/viewform?fbzx=-6936295548842344000](https://docs.google.com/forms/d/e/1FAIpQLScPKV_joWXvvtACKuOdvDILbAzipk8mer0H4ZfOpJEthg-ibA/viewform?fbzx=-6936295548842344000)

…and I just did so (most probably again) :

 ![obrazek](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/4/44b928e6b058b31a17a9971693bfd0392e0a24a8.png)

---

<div class="post-metadata">

**Author:** ![mbnn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mbnn/32/36655_2.png) [@mbnn](https://community.homey.app/u/mbnn)\
**Post date:** [October 9, 2020, 9:34am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/162 "2020-10-09T09:34:05Z")

</div>

I really hope they will add it 🙂

---

<div class="post-metadata">

**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\
**Post date:** [October 23, 2020, 9:44pm UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/163 "2020-10-23T21:44:18Z")

</div>

Seems Netatmo is working on the API for the doorbell and even it’s not documented yet, some developer already made Habitat implementation including Doorbell…

> <https://github.com/syepes/Hubitat/blob/master/Apps/Netatmo/Netatmo.groovy#L593>

```
// Doorbell
if (payload?.push_type?.startsWith('NDB')) {
String doorbellID = payload?.device_id
ChildDeviceWrapper cd_doorbel = cd_devices?.find { it.deviceNetworkId == doorbellID }

if (!cd_doorbel) {
logger("warn", "webhook() - Local Doorbell: ${doorbellID} (${payload?.home_id}) not found")
}

// Workaround until they fix the API - https://forum.netatmo.com/viewtopic.php?f=5&t=18880
switch( payload?.message ) {
case ~/.*Incoming call.* .*Appel entrant.*/:
if(logDescText) {
log.info "${app.name} ${cd_doorbel} Call/Ring: Incoming"
} else {
logger("info", "${cd_doorbel} Call/Ring: Incoming")
}
cd_doorbel?.ring('incoming')
break
case ~/.*Someone picked up.* .*Quelqu’un a accepté l’appel.*/:
if(logDescText) {
log.info "${app.name} ${cd_doorbel} Call/Ring: Accepted"
} else {
logger("info", "${cd_doorbel} Call/Ring: Accepted")
}
cd_doorbel?.ring('accepted')
break
default:
logger("warn", "webhook() - event_type: ${payload} - Unhandled by ${cd_doorbel}")
break
}
```

---

<div class="post-metadata">

**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\
**Post date:** [October 25, 2020, 10:13pm UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/164 "2020-10-25T22:13:59Z")

</div>

So, a small surprise from Athom! :-))

5.1 - Added Netatmo Doorbell

> **[Netatmo](https://homey.app/en-us/app/com.netatmo/Netatmo/)**
>
> Same home, just smarter.

Anyone was able to add his Netatmo Doorbell? It says no new devices has been found ☹

_Update_ Used maintenance on existing camera and - I was able to add Doorbell 🙂 So far “When someone rang” flow exist, all I need at this moment.

---

<div class="post-metadata">

**Author:** ![NickvanderGraaf](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nickvandergraaf/32/2377_2.png) [@NickvanderGraaf](https://community.homey.app/u/NickvanderGraaf)\
**Post date:** [October 26, 2020, 9:00am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/165 "2020-10-26T09:00:30Z")

</div>

Which version of homey are you using?  
I have 4.20, and I get [incompatible\_app\_version] when I try to install the beta app.

---

<div class="post-metadata">

**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\
**Post date:** [October 26, 2020, 9:11am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/167 "2020-10-26T09:11:17Z")

</div>

You need experimental version - v5 - if you are not aware of all the risk, please wait for official update then.  
Btw tested in the morning and it’s working - but only 1st Doorbell button press, when “call” is active, no signal is sent… but even the 1st one is more then enough 😉

---

<div class="post-metadata">

**Author:** ![danone](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danone/32/115743_2.png) [@danone](https://community.homey.app/u/danone)\
**Post date:** [October 26, 2020, 10:10am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/168 "2020-10-26T10:10:30Z")

</div>

Is there a take snapshots card?

---

<div class="post-metadata">

**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\
**Post date:** [October 26, 2020, 10:22am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/169 "2020-10-26T10:22:11Z")

</div>

No, too early for that, I guess even the Netatmo API is not final yet for Doorbell.

---

<div class="post-metadata">

**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\
**Post date:** [October 26, 2020, 8:21pm UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/170 "2020-10-26T20:21:01Z")

</div>

Does anyone knows please if [https://dev.netatmo.com/resources/technical/reference/security/setpersonshome](https://dev.netatmo.com/resources/technical/reference/security/setpersonshome) is implemented? Seems to be available in Homes API since 2018.  
Together with Presence status would be nice combo faster then recognizing person…

---

<div class="post-metadata">

**Author:** ![HuisCHovens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/huischovens/32/16973_2.png) [@HuisCHovens](https://community.homey.app/u/HuisCHovens)\
**Post date:** [November 4, 2020, 8:53pm UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/172 "2020-11-04T20:53:12Z")

</div>

i don’t know if this is already asked.  
but I have a Netatmo thermostat and when it comes on to switch on the boiler, I want to run an hourglass and that it stops when the boiler goes out. is that possible of something for the next version ?

---

<div class="post-metadata">

**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\
**Post date:** [December 2, 2020, 6:42am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/173 "2020-12-02T06:42:28Z")

</div>

Beware - recently I discovered that all my Netatmo Weather station, Anenometer, Rain Gauge got updated values 1 month ago - I was wondering why some flows were not working - luckily Repair function simply helps but it’s a pity there isn’t any safety mechanism which would somehow eg. mark device longer time not updating (I know there is trigger A device hasn’t reported, so maybe I will put that instead).

---

<div class="post-metadata">

**Author:** ![danone](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danone/32/115743_2.png) [@danone](https://community.homey.app/u/danone)\
**Post date:** [December 2, 2020, 7:18am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/174 "2020-12-02T07:18:31Z")

</div>

> [@Sharkys](#):
>
> recently I discovered that all my Netatmo Weather station, Anenometer, Rain Gauge got updated values 1 month ago

Yup, for the first time since I have Homey with Netatmo (3.5years now) I had the same this week, no reporting although Netatmo was OK. For 10 hours and my bathroom fan was going nuts since humidity was not right.  
App restart did not fix, PTP Homey did fix.

---

<div class="post-metadata">

**Author:** ![Ria\_Banis](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ria_banis/32/7966_2.png) [@Ria\_Banis](https://community.homey.app/u/Ria_Banis)\
**Post date:** [December 2, 2020, 11:36am UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/175 "2020-12-02T11:36:46Z")

</div>

I have (another) issue but I am getting answers within a few hours.

---

<div class="post-metadata">

**Author:** ![Punnik](https://avatars.discourse-cdn.com/v4/letter/p/4da419/32.png) [@Punnik](https://community.homey.app/u/Punnik)\
**Post date:** [December 19, 2020, 7:13pm UTC](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360/176 "2020-12-19T19:13:00Z")

</div>

Homey finds my Netatmo doorbell, but when i try to open it i’ve got an error (see pic)  
I can make a flow, but that also does nothing.  
(I know it is a beta, but any clue maybe ? )

 ![Screenshot_20201219-200730_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/e/ce64ffcbd9d45915cc811e0bebe379e3ff77c0bf.jpeg)

[Previous page](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360.md?page=7)

[Next page](https://community.homey.app/t/app-netatmo-same-home-just-smarter-by-athom/360.md?page=9)