# \[APP\] myUplink - Set up your indoor climate the way you want it to feel **URL:** \ **Category:** Apps\ **Created:** [August 12, 2024, 10:07am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266 "2024-08-12T10:07:20Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![myUpTech\_AB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/myuptech_ab/32/118476_2.png) [@myUpTech\_AB](https://community.homey.app/u/myUpTech_AB)\ **Post date:** [August 12, 2024, 10:07am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/1 "2024-08-12T10:07:20Z")
The topic is intended for discussions about the [myUplink Homey app](https://homey.app/a/com.myuplink/). > **[myUplink](https://homey.app/en-us/app/com.myuplink/myUplink/)** > > Set up your indoor climate the way you want it to feel Various questions, comments, and suggestions are welcome and can be posted under this topic. ---
**Author:** ![kjson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kjson/32/113918_2.png) [@kjson](https://community.homey.app/u/kjson)\ **Post date:** [September 8, 2024, 7:13pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/2 "2024-09-08T19:13:48Z")
Could you add support for the Nibe F730 in the app? ---
**Author:** ![Millegarden](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/millegarden/32/79472_2.png) [@Millegarden](https://community.homey.app/u/Millegarden)\ **Post date:** [September 25, 2024, 9:57pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/3 "2024-09-25T21:57:57Z")
+1 for Nibe F739 ---
**Author:** ![Denys\_Kravtsov](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/denys_kravtsov/32/78882_2.png) [@Denys\_Kravtsov](https://community.homey.app/u/Denys_Kravtsov)\ **Post date:** [September 27, 2024, 7:48am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/4 "2024-09-27T07:48:07Z")
Hello @kjson @Millegarden, Thanks for your request. Adding support for NIBE F-series devices has been discussed within myUplink dev team, and the ticket for implementation has been created. It will be addressed according to priorities. ---
**Author:** ![Xenonsens](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/xenonsens/32/114234_2.png) [@Xenonsens](https://community.homey.app/u/Xenonsens)\ **Post date:** [September 30, 2024, 11:48am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/5 "2024-09-30T11:48:17Z")
Hi @Denys_Kravtsov, If you could also add Nibe F370, that would be awsome! Since 30 aug users of Nibe Uplink cannot use that service, we are directed to MyUplink. So if you could also add the Nibe Fxx series that would be awsome! Kind regards, Jonas ---
**Author:** ![Krisstenswe](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krisstenswe/32/13447_2.png) [@Krisstenswe](https://community.homey.app/u/Krisstenswe)\ **Post date:** [October 4, 2024, 4:20pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/6 "2024-10-04T16:20:36Z")
+1 for Nibe F730 TIA! ---
**Author:** ![orda1](https://avatars.discourse-cdn.com/v4/letter/o/cab0a1/32.png) [@orda1](https://community.homey.app/u/orda1)\ **Post date:** [October 15, 2024, 6:01pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/7 "2024-10-15T18:01:43Z")
Can you add support for the CTC EcoZenith? ---
**Author:** ![Cokeisit](https://avatars.discourse-cdn.com/v4/letter/c/6a8cbe/32.png) [@Cokeisit](https://community.homey.app/u/Cokeisit)\ **Post date:** [October 31, 2024, 7:27pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/8 "2024-10-31T19:27:47Z")
+1 for Nibe F730 ---
**Author:** ![Danny\_Focquaert](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danny_focquaert/32/113242_2.png) [@Danny\_Focquaert](https://community.homey.app/u/Danny_Focquaert)\ **Post date:** [November 6, 2024, 5:48am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/9 "2024-11-06T05:48:59Z")
Thanks guys - I just have connected the app myUplink app to my new Nibe S1255. Dashboard is OK and flows are also working. I’m wondering to do more e.g. read the produced thermal heat and the consumed electric power (new in NIBE SW 3.3), calculate the COP and for sure using flows to force AUX inputs to shift the output temperature. Finally I have to end up the heat pump absorbing the eccess solar energy injected in the grid ---
**Author:** ![Millegarden](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/millegarden/32/79472_2.png) [@Millegarden](https://community.homey.app/u/Millegarden)\ **Post date:** [November 25, 2024, 10:24pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/10 "2024-11-25T22:24:01Z")
Hi! Added the F730 as generic device but do not show the appropriate value for the hot water charging. BT6. The others seems to work fine. The BT6 value do not get any updates. Have tried to remove and er-add but didn’t work. Any advice? @Denys_Kravtsov ---
**Author:** ![Torbjorn\_Melbye](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/torbjorn_melbye/32/18194_2.png) [@Torbjorn\_Melbye](https://community.homey.app/u/Torbjorn_Melbye)\ **Post date:** [December 14, 2024, 9:41am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/11 "2024-12-14T09:41:51Z")
Since yesterday, I keep losing contact with my water heater. Comes back when I repair the device, but falls out again almost straight away. ---
**Author:** ![Bernt\_Brundtland](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bernt_brundtland/32/55891_2.png) [@Bernt\_Brundtland](https://community.homey.app/u/Bernt_Brundtland)\ **Post date:** [December 16, 2024, 8:37am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/12 "2024-12-16T08:37:59Z")
I’ve developed my own app for integrating with my Höiax Anima Eco Tower using a CTC EcoLogic L/M communication module. I use it for monitoring—among other things, to balance out power spikes and receive error notifications. In addition, the integration provides a solid history of various measurements such as degree-days, energy consumption, and temperatures from a range of sensors. I have plans to enhance the functionality further, for example by enabling vacation mode, temporary increases in hot water supply, and adjusting modes for domestic hot water and heating (energy-saving, normal, comfort, etc.). The reason I mention this is that I would really like to access your source code on GitHub (the link currently returns a 404) if possible. If you’re interested, I’d be happy to contribute parameters from my setup to the codebase. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/4/2423dcb471ea8874af1607bea6c575ee2a99c41c.jpeg) ---
**Author:** ![svergie2](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/svergie2/32/79578_2.png) [@svergie2](https://community.homey.app/u/svergie2)\ **Post date:** [December 18, 2024, 9:56pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/13 "2024-12-18T21:56:19Z")
Nice app! Support for F370 would be greatly appreciated ---
**Author:** ![Westberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/westberg/32/48009_2.png) [@Westberg](https://community.homey.app/u/Westberg)\ **Post date:** [December 19, 2024, 9:48am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/14 "2024-12-19T09:48:45Z")
MyUplink and CTC i250 with new display. I just upgraded to the new display for EcoZenith i255, which gives me myUplink. I have the myUplink running and can see the heat pump there, but when I try connect it with Homey, no devices are found when using the CTC device. But when I choose generic device I get that one is found. Please help me get the CTC device running, since I do not what to specify every parameter I want to see. ---
**Author:** ![Strommen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/strommen/32/120715_2.png) [@Strommen](https://community.homey.app/u/Strommen)\ **Post date:** [December 19, 2024, 11:17pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/15 "2024-12-19T23:17:06Z")
Awesome app! I miss support for F2050-10 though. Is this something you guys can add? God jul! ---
**Author:** ![Frode\_Hagen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frode_hagen/32/120921_2.png) [@Frode\_Hagen](https://community.homey.app/u/Frode_Hagen)\ **Post date:** [December 28, 2024, 4:06am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/16 "2024-12-28T04:06:55Z")
It seems like the app is missing support for CTC GSi 608, and i had to configure it as a generic device. It would be great with full support for the product. ---
**Author:** ![Magnus\_Engseth](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/magnus_engseth/32/80256_2.png) [@Magnus\_Engseth](https://community.homey.app/u/Magnus_Engseth)\ **Post date:** [March 3, 2025, 8:49pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/17 "2025-03-03T20:49:42Z")
Have you considered official support for Alpha Innotec devices? ---
**Author:** ![Dirk\_Loekemeijer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirk_loekemeijer/32/80637_2.png) [@Dirk\_Loekemeijer](https://community.homey.app/u/Dirk_Loekemeijer)\ **Post date:** [April 28, 2025, 5:51pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/18 "2025-04-28T17:51:21Z")
I tried the app bit it doesn’t work. it says it’s not installed? But it is in de list with apps. Usually you have to log in on the account of the app to connect never had that option. ---
**Author:** ![JJvdg26](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jjvdg26/32/120728_2.png) [@JJvdg26](https://community.homey.app/u/JJvdg26)\ **Post date:** [August 4, 2025, 10:24pm UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/19 "2025-08-04T22:24:57Z")
Dear developers, is it possible to make a driver for the Alpha innotec Ground source heat pump. ---
**Author:** ![Freddy\_Brakestad](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/freddy_brakestad/32/68428_2.png) [@Freddy\_Brakestad](https://community.homey.app/u/Freddy_Brakestad)\ **Post date:** [August 25, 2025, 7:12am UTC](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266/20 "2025-08-25T07:12:07Z")
Any reason to only get “Invalid username/password” when logging into the app on Homey, when I use the same credentials when I log in through Chrome, and everything just works there..? Even with copy/paste, I get this.. ![Skjermbilde 2025-08-25 kl. 09.14.44](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/8/0844296c956f0a170b913d32a80b71c158d7083b.png) [Next page](https://community.homey.app/t/app-myuplink-set-up-your-indoor-climate-the-way-you-want-it-to-feel/114266.md?page=2)