# \[App\] Hikvision

**URL:** <https://community.homey.app/t/app-hikvision/16642>\
**Category:** Apps\
**Created:** [August 9, 2019, 4:56pm UTC](https://community.homey.app/t/app-hikvision/16642 "2019-08-09T16:56:22Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![WouterV](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouterv/32/14740_2.png) [@WouterV](https://community.homey.app/u/WouterV)\
**Post date:** [August 29, 2019, 6:53pm UTC](https://community.homey.app/t/app-hikvision/16642/41 "2019-08-29T18:53:06Z")

</div>

@mapulu yes they do if i disable one of them then it works

---

<div class="post-metadata">

**Author:** ![WouterV](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouterv/32/14740_2.png) [@WouterV](https://community.homey.app/u/WouterV)\
**Post date:** [August 30, 2019, 9:10am UTC](https://community.homey.app/t/app-hikvision/16642/42 "2019-08-30T09:10:43Z")

</div>

I will do some more testing and will attach the log file of the stream

---

<div class="post-metadata">

**Author:** ![WouterV](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouterv/32/14740_2.png) [@WouterV](https://community.homey.app/u/WouterV)\
**Post date:** [August 30, 2019, 6:23pm UTC](https://community.homey.app/t/app-hikvision/16642/43 "2019-08-30T18:23:46Z")

</div>

@mapulu it doesnt seem to be connected to what i was saying previously. it doesnt matter if the intrusion and line dection are triggered at the same time.

for some reason it just doesnt get triggered but this only happens sometimes.  
\<-EventNotificationAlert version=“1.0” xmlns=“[http://www.hikvision.com/ver20/XMLSchema](http://www.hikvision.com/ver20/XMLSchema)”\>  
\<-ipAddress\>192.168.1.103\<-/ipAddress\>  
\<-portNo\>80\<-/portNo\>  
\<-protocol\>HTTP\<-/protocol\>  
\<-macAddress\>f8:4d:fc:ed:96:35\<-/macAddress\>  
\<-dynChannelID\>4\<-/dynChannelID\>  
\<-dateTime\>2019-08-30T20:09:22+01:00\<-/dateTime\>  
\<-activePostCount\>1\<-/activePostCount\>  
\<-eventType\>linedetection\<-/eventType\>  
\<-eventState\>active\<-/eventState\>  
\<-eventDescription\>linedetection alarm\<-/eventDescription\>  
\<-/EventNotificationAlert\>  
–boundary  
Content-Type: application/xml; charset=“UTF-8”  
Content-Length: 469

But it does seems that it only happens to linedetection and not to fielddetection  
In hik-connect it always works.

Is it possible that homey loses connection the the alertStream? is there any way to check that? or could you make a trigger for it?

---

<div class="post-metadata">

**Author:** ![mapulu](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@mapulu](https://community.homey.app/u/mapulu)\
**Post date:** [August 30, 2019, 6:41pm UTC](https://community.homey.app/t/app-hikvision/16642/44 "2019-08-30T18:41:31Z")

</div>

Post can’t be empty

---

<div class="post-metadata">

**Author:** ![WouterV](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouterv/32/14740_2.png) [@WouterV](https://community.homey.app/u/WouterV)\
**Post date:** [August 30, 2019, 7:50pm UTC](https://community.homey.app/t/app-hikvision/16642/45 "2019-08-30T19:50:08Z")

</div>

How do i get into the device history?

---

<div class="post-metadata">

**Author:** ![mapulu](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@mapulu](https://community.homey.app/u/mapulu)\
**Post date:** [August 30, 2019, 7:58pm UTC](https://community.homey.app/t/app-hikvision/16642/46 "2019-08-30T19:58:02Z")

</div>

Post can’t be empty

---

<div class="post-metadata">

**Author:** ![WouterV](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouterv/32/14740_2.png) [@WouterV](https://community.homey.app/u/WouterV)\
**Post date:** [August 30, 2019, 8:33pm UTC](https://community.homey.app/t/app-hikvision/16642/47 "2019-08-30T20:33:30Z")

</div>

Ah ok all fine over there, connected 2 days ago

---

<div class="post-metadata">

**Author:** ![Aflex77](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/aflex77/32/14508_2.png) [@Aflex77](https://community.homey.app/u/Aflex77)\
**Post date:** [September 4, 2019, 4:32pm UTC](https://community.homey.app/t/app-hikvision/16642/48 "2019-09-04T16:32:22Z")

</div>

Hi. I have created three flows like the example above. The flows work and I get a push message to my phone. But the problem is that the screenshot is “empty”. Is it possible to delay the screenshot 5s or so after the initial motion detection?

---

<div class="post-metadata">

**Author:** ![mapulu](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@mapulu](https://community.homey.app/u/mapulu)\
**Post date:** [September 4, 2019, 4:40pm UTC](https://community.homey.app/t/app-hikvision/16642/49 "2019-09-04T16:40:54Z")

</div>

Post can’t be empty

---

<div class="post-metadata">

**Author:** ![Alcor](https://avatars.discourse-cdn.com/v4/letter/a/a88e4f/32.png) [@Alcor](https://community.homey.app/u/Alcor)\
**Post date:** [September 4, 2019, 7:57pm UTC](https://community.homey.app/t/app-hikvision/16642/50 "2019-09-04T19:57:58Z")

</div>

Hi,

I can confirm that the app works with the DS2CD2335FWD-1 connected to a DS7604NI-K1 NVR.

However, I cannot find the correct http link for still images. Could someone please help me out?

Thanks!

---

<div class="post-metadata">

**Author:** ![mapulu](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@mapulu](https://community.homey.app/u/mapulu)\
**Post date:** [September 4, 2019, 8:04pm UTC](https://community.homey.app/t/app-hikvision/16642/51 "2019-09-04T20:04:43Z")

</div>

Post can’t be empty

---

<div class="post-metadata">

**Author:** ![Jorgen\_Bertholdsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jorgen_bertholdsson/32/12491_2.png) [@Jorgen\_Bertholdsson](https://community.homey.app/u/Jorgen_Bertholdsson)\
**Post date:** [September 11, 2019, 8:53am UTC](https://community.homey.app/t/app-hikvision/16642/52 "2019-09-11T08:53:57Z")

</div>

is it possible to start/stop recording on the cameras with Homey?  
As is, when our home alarm is on, the cameras should be “enabled”, when we get home and deactivate the home alarm, the cameras should be “disabled”.

---

<div class="post-metadata">

**Author:** ![mapulu](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@mapulu](https://community.homey.app/u/mapulu)\
**Post date:** [September 11, 2019, 3:56pm UTC](https://community.homey.app/t/app-hikvision/16642/53 "2019-09-11T15:56:21Z")

</div>

Post can’t be empty

---

<div class="post-metadata">

**Author:** ![Jorgen\_Bertholdsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jorgen_bertholdsson/32/12491_2.png) [@Jorgen\_Bertholdsson](https://community.homey.app/u/Jorgen_Bertholdsson)\
**Post date:** [September 12, 2019, 6:55am UTC](https://community.homey.app/t/app-hikvision/16642/54 "2019-09-12T06:55:54Z")

</div>

Great news! And sorry, I don’t have a PTZ camera ☹

---

<div class="post-metadata">

**Author:** ![Marvin\_Schenkel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marvin_schenkel/32/10195_2.png) [@Marvin\_Schenkel](https://community.homey.app/u/Marvin_Schenkel)\
**Post date:** [September 16, 2019, 9:59am UTC](https://community.homey.app/t/app-hikvision/16642/55 "2019-09-16T09:59:02Z")

</div>

Thanks for the app! I tried adding my dad’s cameras, but nothing is happening when I press ‘connect’. Is there any way to get some error messages?

---

<div class="post-metadata">

**Author:** ![mapulu](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@mapulu](https://community.homey.app/u/mapulu)\
**Post date:** [September 16, 2019, 10:25am UTC](https://community.homey.app/t/app-hikvision/16642/56 "2019-09-16T10:25:14Z")

</div>

Post can’t be empty

---

<div class="post-metadata">

**Author:** ![Marvin\_Schenkel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marvin_schenkel/32/10195_2.png) [@Marvin\_Schenkel](https://community.homey.app/u/Marvin_Schenkel)\
**Post date:** [September 16, 2019, 10:56am UTC](https://community.homey.app/t/app-hikvision/16642/57 "2019-09-16T10:56:38Z")

</div>

Sure thing, just sent you one: 13e8c70a-79b9-4236-a266-3262312e994e

---

<div class="post-metadata">

**Author:** ![mapulu](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@mapulu](https://community.homey.app/u/mapulu)\
**Post date:** [September 16, 2019, 11:03am UTC](https://community.homey.app/t/app-hikvision/16642/58 "2019-09-16T11:03:28Z")

</div>

Post can’t be empty

---

<div class="post-metadata">

**Author:** ![Kevin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kevin/32/7999_2.png) [@Kevin](https://community.homey.app/u/Kevin)\
**Post date:** [September 17, 2019, 6:16pm UTC](https://community.homey.app/t/app-hikvision/16642/59 "2019-09-17T18:16:43Z")

</div>

I own a PTZ hikvision cam, currently using webhooks sent to the camera directly (via virtual server/port forwarding of nvr) to go to presets.  
Camera model:  
DS-2DE2A404IW-DE3  
If you need any testing done, let me know. It would be great if you take the time and effort to integrate it :)😀  
A question: could you add an option to take snapshots from the “channel 0” stream? It is created by my hikvision nvr. Same url as for camera snapshots, only change camera number (channel) to 0. Would like to use it to send images via pushover, instead of sending pictures of all cameras individually.  
Again if any testing needs to be done let me know. Thanks for creating to app!

---

<div class="post-metadata">

**Author:** ![mapulu](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@mapulu](https://community.homey.app/u/mapulu)\
**Post date:** [September 17, 2019, 6:36pm UTC](https://community.homey.app/t/app-hikvision/16642/60 "2019-09-17T18:36:23Z")

</div>

Post can’t be empty

[Previous page](https://community.homey.app/t/app-hikvision/16642.md?page=2)

[Next page](https://community.homey.app/t/app-hikvision/16642.md?page=4)