# \[APP\] Go-e - Simply Charge Smart. (official)
**URL:** https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757
**Category:** Apps
**Tags:** app
**Created:** [June 4, 2026, 2:05pm UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757 "2026-06-04T14:05:15Z")
**Posts on this page:** 15
**Page:** 2
### Author:  [@Martin\_Koning](https://community.homey.app/u/Martin_Koning)
#### Post date: [September 3, 2026, 9:40am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/22 "2026-09-03T09:40:56Z")
Yes, he finds a device.
When acknowledged. Pop up.
1 router, 1 dhcp, 1 pool ip
SSID inside
SSID outside with cable to router.
Martin
---
### Author:  [@OH2TH](https://community.homey.app/u/OH2TH)
#### Post date: [September 3, 2026, 10:09am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/23 "2026-09-03T10:09:46Z")
Ahaa, that is strange. Can you try adding via my.homey.app? I wonder, if this is an Android issue of a sort.
---
### Author:  [@Martin\_Koning](https://community.homey.app/u/Martin_Koning)
#### Post date: [September 3, 2026, 10:26am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/24 "2026-09-03T10:26:02Z")
Did this on my phone (browser → desktopsite x)
Martin
---
### Author:  [@OH2TH](https://community.homey.app/u/OH2TH)
#### Post date: [September 3, 2026, 11:05am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/25 "2026-09-03T11:05:05Z")
I enchance the logging a little bit show on the diagnostics report what device.data actually contains.
If you could install the test version from [Go-e | Homey](https://homey.app/a/com.go-e/test/) and do the above process again.
---
### Author:  [@OH2TH](https://community.homey.app/u/OH2TH)
#### Post date: [September 3, 2026, 2:01pm UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/26 "2026-09-03T14:01:40Z")
The diagnostics says that no device was found. Please check that your charger is actually discoverable.
> [@See instructions here](#):
>
> My go-e Charger is not found in my local network
---
### Author:  [@Martin\_Koning](https://community.homey.app/u/Martin_Koning)
#### Post date: [September 3, 2026, 6:09pm UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/27 "2026-09-03T18:09:18Z")
Netwerk binnen
---
### Author:  [@OH2TH](https://community.homey.app/u/OH2TH)
#### Post date: [September 4, 2026, 3:24am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/28 "2026-09-04T03:24:06Z")
# **New Update (TEST [1.7.4](https://homey.app/a/com.go-e/test))**
> **Changes include**
>
> - **FIX** : Homeplus local discovery.
Thanks @Martin_Koning that helped.
There is a new version in the test branch. Please install that one and try adding your device.
---
### Author:  [@Martin\_Koning](https://community.homey.app/u/Martin_Koning)
#### Post date: [September 4, 2026, 4:35am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/29 "2026-09-04T04:35:24Z")
Done. Got it now. Thanks very much. I wil start changing advanced flows next weekend. I’ve been witjh the go-eCharge Homey-app for 5 years now on my Homey Pro 2019. Integrated it in almost everything. 🫣
---
### Author:  [@OH2TH](https://community.homey.app/u/OH2TH)
#### Post date: [September 4, 2026, 5:57am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/30 "2026-09-04T05:57:26Z")
This one is quite different from the original app. But has some really easy features to fit Homey’s default logic and capabilities.
---
### Author:  [@Martin\_Koning](https://community.homey.app/u/Martin_Koning)
#### Post date: [September 6, 2026, 5:03pm UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/31 "2026-09-06T17:03:02Z")
Totally different. It works now, but i’m not totally convinced yet. But thats also for what i want it to do. 😉
I wanted the app “SlimLaden” to be the EMS. Because I’m thinking of buying a plug-in-battery.
For now.
I have SMA solar power inverters which i am dimming with modbus (% inverter-max at Grid) when the netto-price is negative. (EPEX-price €0,02/kwh. I have to pay €0,02/kWh for selling electricity )
Therefore potential solar power dissapears. You can’t now what isn’t produced. It appears in figures when used.
Gridmeter: -200W → Result: The go-eCharger won’t start and also stops very often.
Now I’m tweaking with modbus at SMA inverter. Gridmeter at -4200W when plugged in. Started charging then Gridmeter: -890 (-200-690) then the go-eCharger wil give more power. But the result is not stable yet. Maybe it’s the 10 second delay. Maybe the old Homey2019 is not quick enough.
---
### Author:  [@Martin\_Koning](https://community.homey.app/u/Martin_Koning)
#### Post date: [September 6, 2026, 5:07pm UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/32 "2026-09-06T17:07:04Z")
The target power will not go to 17.250 W (3x25A)
I think the app limit’s it at 11 kW.
I have Version 3 from 2020. It can do 22 kW (3x32A)
---
### Author:  [@OH2TH](https://community.homey.app/u/OH2TH)
#### Post date: [September 7, 2026, 3:09am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/33 "2026-09-07T03:09:01Z")
It should retrieve the 11/22 kW info from the charger. I’ll check that.
Found the issue, please try this test release: [Go-e | Homey](https://homey.app/a/com.go-e/test/)
Meanwhile, there is one thing to know about go-e charger’s behavior:
When the go-e charger has switched between 1-phase and 3-phase charging, it will lock to that setting for 10 minutes, that can not be adjusted. Meaning that if it was in 3-phase and your surplus on grid drops below ~4000 W, it won’t switch back to single phase until the 10 minutes safety period is up.
---
### Author:  [@Martin\_Koning](https://community.homey.app/u/Martin_Koning)
#### Post date: [September 7, 2026, 5:30pm UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/34 "2026-09-07T17:30:12Z")
22 kW works now
---
### Author:  [@tlink](https://community.homey.app/u/tlink)
#### Post date: [September 16, 2026, 7:22am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/35 "2026-09-16T07:22:55Z")
> [@Complus](#):
>
> Finally start feeding your grid power details to the charger:
>
> 
>
> When grid power changes, sent it to the evCharger as pGrid value (the first parameter in the card. Set the other values to zero.
@Complus Thank you for the FAQ and helpful hints.
Do you know by chance if the trigger „on every change“ as proposed or a repeating timer will be better for Homey memory?
---
### Author:  [@OH2TH](https://community.homey.app/u/OH2TH)
#### Post date: [September 16, 2026, 10:39am UTC](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757/36 "2026-09-16T10:39:56Z")
The flow only updates the values to the go-e app. Go-e app only keeps the last value and sends the value over the API to the charger.
So no, I do not believe it will consume more memory because of the updates.
[Previous page](https://community.homey.app/t/app-go-e-simply-charge-smart-official/155757.md?page=1)