# \[APP\] Fibaro - Your home is your castle (by Athom) **URL:** \ **Category:** Apps\ **Tags:** app, official\ **Created:** [August 24, 2018, 9:07am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362 "2018-08-24T09:07:50Z")\ **Posts on this page:** 20\ **Page:** 7
**Author:** ![danone](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danone/32/115743_2.png) [@danone](https://community.homey.app/u/danone)\ **Post date:** [January 19, 2019, 9:26am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/128 "2019-01-19T09:26:44Z")
> [@David\_K](#): > > In my head that is not supported. I’ll check if colleague can do it using fibaro home center. I simply think type of switch is single config for both s1 and S2. Thanks. I think you are right. There is only one parameter (20) which is used to define the type of switch to both S1 and S2. Not individual settings. Then maybe the fibaro app should only allow for one setting on S1. ---
**Author:** ![Caros](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caros/32/12410_2.png) [@Caros](https://community.homey.app/u/Caros)\ **Post date:** [January 19, 2019, 1:37pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/129 "2019-01-19T13:37:02Z")
Since my update I had to remove and add all the devices manually. I had one fibaro switch only for measuring. Is it still possible to disable toggling the switch from the Fibaro single switch 2? I can’t find it anymore in 2.0. ---
**Author:** ![RTimmer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rtimmer/32/591_2.png) [@RTimmer](https://community.homey.app/u/RTimmer)\ **Post date:** [January 19, 2019, 1:58pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/130 "2019-01-19T13:58:44Z")
Can we expect an update that fixes this anytime soon?? I think it is kind of ridiculous to have things as they are now, and not roll back to a version where everything just worked. Or is re-including the devices the new way forward…??? Please tell me that is not the case. ---
**Author:** ![David\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/david_k/32/10319_2.png) [@David\_K](https://community.homey.app/u/David_K)\ **Post date:** [January 19, 2019, 2:28pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/131 "2019-01-19T14:28:37Z")
> [@Caros](#): > > Since my update I had to remove and add all the devices manually. I had one fibaro switch only for measuring. Is it still possible to disable toggling the switch from the Fibaro single switch 2? I can’t find it anymore in 2.0. All the options are still here. Long press on the switch (device) then settings (up right corner) then advanced settings. > [@RTimmer](#): > > is re-including the devices the new way forward…??? > Please tell me that is not the case. I think only one or two type of fibaro devices had issues. I’ve lost my mind initially as I thought I will have to digg the switch for the reset button. At the end I only had to re-add one device. All in all, everything is working now for me. I’ve disabled the auto update and will again update after a 1-2 months for things to settle. V2.0 is a completely new device. We just needs to live trough this couple of months and we are back in the calm waters. ---
**Author:** ![Caros](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caros/32/12410_2.png) [@Caros](https://community.homey.app/u/Caros)\ **Post date:** [January 19, 2019, 3:25pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/132 "2019-01-19T15:25:27Z")
I see this option for the fibaro wall plug indeed, but not for the Single Switch 2 anymore. ---
**Author:** ![Rob](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rob/32/10272_2.png) [@Rob](https://community.homey.app/u/Rob)\ **Post date:** [January 19, 2019, 4:21pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/133 "2019-01-19T16:21:06Z")
It looks like that the double switch 2 (S2) only works via a flow or “groups” as suggested. The tile in the Homey app is broken. ---
**Author:** ![RTimmer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rtimmer/32/591_2.png) [@RTimmer](https://community.homey.app/u/RTimmer)\ **Post date:** [January 19, 2019, 4:33pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/134 "2019-01-19T16:33:03Z")
Exactly, I have the same experience, same applies for the double relay by the way. ---
**Author:** ![Rob](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rob/32/10272_2.png) [@Rob](https://community.homey.app/u/Rob)\ **Post date:** [January 19, 2019, 4:47pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/135 "2019-01-19T16:47:49Z")
@Bram are you with us? ---
**Author:** ![ditisstephan](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ditisstephan/32/3281_2.png) [@ditisstephan](https://community.homey.app/u/ditisstephan)\ **Post date:** [January 20, 2019, 9:01pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/136 "2019-01-20T21:01:17Z")
I want to use a fibaro double switch 2 behind a mechanical switch in my kitchen that is now used to switch a power outlet in my garden. I have no need to switch this power outlet, so i want to provide constant current to it by bypassing the mechnical switch. That leaves my mechanical switch unused, but i now want to use this to switch a hue lightstrip in the kitchen that is powered from somewhere else. So: can i do this with a fibaro double switch 2? Can i make a flow with a double switch 2, without it having a direct load attacted to it? Will it switch in homey? ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [January 20, 2019, 9:14pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/137 "2019-01-20T21:14:02Z")
@ditisstephan yes, this is possible, i use this myself 4 times, just make sure you don’t use the dimmer 2, as that does need an output attached. ---
**Author:** ![toox](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/toox/32/13504_2.png) [@toox](https://community.homey.app/u/toox)\ **Post date:** [January 20, 2019, 10:39pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/138 "2019-01-20T22:39:08Z")
The Tamper Alarm is constantly on with Fibaro Motion Sensor FGMS-001 after update to 2.0. and temperature and luminance updates very seldom ( like after 10 - 12 hours). Device settings are unchanged. I dont know if that is a hardware or software problem, but something is wrong. Any idea how to solve this issue? ---
**Author:** ![Itchy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/itchy/32/8717_2.png) [@Itchy](https://community.homey.app/u/Itchy)\ **Post date:** [January 21, 2019, 8:53am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/139 "2019-01-21T08:53:04Z")
i have the same problem with the tamper alarm for the fibaro motion sensor, so i think its not your hardware. ---
**Author:** ![Xtasy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/xtasy/32/12671_2.png) [@Xtasy](https://community.homey.app/u/Xtasy)\ **Post date:** [January 21, 2019, 11:05am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/140 "2019-01-21T11:05:10Z")
Yeah Athom needs to finally step up and fix the app… ---
**Author:** ![Fire69](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fire69/32/8758_2.png) [@Fire69](https://community.homey.app/u/Fire69)\ **Post date:** [January 21, 2019, 11:17am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/141 "2019-01-21T11:17:38Z")
I wonder what’s going on with the app/firmware… I installed a new Double Switch 2 yesterday, everything is working just fine (at first sight). ---
**Author:** ![David\_K](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/david_k/32/10319_2.png) [@David\_K](https://community.homey.app/u/David_K)\ **Post date:** [January 21, 2019, 11:27am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/142 "2019-01-21T11:27:34Z")
> [@Fire69](#): > > I installed a new Double Switch 2 yesterday, everything is working just fine (at first sight). Double Switch 2 is working normally after app upgrade. I personally just removed it and paired it again. I think maybe it would work even without re-pairing. You have different experience? ---
**Author:** ![PhilS](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phils/32/12941_2.png) [@PhilS](https://community.homey.app/u/PhilS)\ **Post date:** [January 21, 2019, 11:27am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/143 "2019-01-21T11:27:42Z")
The new firmware rc2 fixed my problem with the double switch now! [firmware.athom.com](http://firmware.athom.com) ---
**Author:** ![Rob](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rob/32/10272_2.png) [@Rob](https://community.homey.app/u/Rob)\ **Post date:** [January 21, 2019, 11:57am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/144 "2019-01-21T11:57:07Z")
I still can’t use the tile in the Homey app. Flows are working but no manual switching. ---
**Author:** ![PhilS](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phils/32/12941_2.png) [@PhilS](https://community.homey.app/u/PhilS)\ **Post date:** [January 21, 2019, 1:14pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/145 "2019-01-21T13:14:11Z")
Try restarting and disable/enable Fibaro app. Then ptp if it won‘t work. ---
**Author:** ![Rob](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rob/32/10272_2.png) [@Rob](https://community.homey.app/u/Rob)\ **Post date:** [January 21, 2019, 1:18pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/146 "2019-01-21T13:18:22Z")
The new release fibaro app doesn’t fix the double switch S2 tile. ---
**Author:** ![Jamie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jamie/32/5274_2.png) [@Jamie](https://community.homey.app/u/Jamie)\ **Post date:** [January 21, 2019, 1:24pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/147 "2019-01-21T13:24:17Z")
2.0.1rc fixed the Fibaro Dial switch error for me. [Previous page](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362.md?page=6) [Next page](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362.md?page=8)