# \[APP\] Fibaro - Your home is your castle (by Athom) **URL:** \ **Category:** Apps\ **Tags:** app, official\ **Created:** [August 24, 2018, 9:07am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362 "2018-08-24T09:07:50Z")\ **Posts on this page:** 20\ **Page:** 37
**Author:** ![Krisstenswe](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krisstenswe/32/13447_2.png) [@Krisstenswe](https://community.homey.app/u/Krisstenswe)\ **Post date:** [October 2, 2023, 12:36pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/748 "2023-10-02T12:36:04Z")
I agree that load would have been something to investigate if it had gone off. Now it goes on and then I don’t believe in load. I’ve been looking for association-related problems, but haven’t been able to find anything. The device controls a water pump to harvest rainwater for watering the garden and now that the season is over, luckily I’m in no rush to fix the problem. I hope for Peter’s flow with Device capabilities. ---
**Author:** ![Jo\_San](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jo_san/32/3732_2.png) [@Jo\_San](https://community.homey.app/u/Jo_San)\ **Post date:** [October 2, 2023, 2:51pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/749 "2023-10-02T14:51:46Z")
To rule out micro power interruptions / fluctuations causing this behaviour, you could check if the setting “resume status after power interruption” is disabled (or something like that, mine is in Dutch). As for associations, normally there would only be a “1” in the first association group in the settings. ---
**Author:** ![Krisstenswe](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/krisstenswe/32/13447_2.png) [@Krisstenswe](https://community.homey.app/u/Krisstenswe)\ **Post date:** [October 2, 2023, 4:25pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/750 "2023-10-02T16:25:36Z")
Do you mean ‘Restore state after power failure’? I have never, so far, had this cause any problems on any of the devices I have, but it is worth trying on this particular device. After I get the next on-trigger on it, I’ll try disabling ‘Restore state after power failure’. Good tip! Regarding association, I have checked and there is only a “1” in the first association group. I have compared the settings with other similar Fibaro devices - they have the same associations. Thanks for your help! ---
**Author:** ![Bartj](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bartj/32/56465_2.png) [@Bartj](https://community.homey.app/u/Bartj)\ **Post date:** [October 6, 2023, 3:27pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/751 "2023-10-06T15:27:06Z")
Hi, I can’t control some Fibaro Walli Switches, get the error “missing library type from ZW\_GET\_VERSION” What can i do to solve this problem? ---
**Author:** ![Andre\_Kramer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andre_kramer/32/79084_2.png) [@Andre\_Kramer](https://community.homey.app/u/Andre_Kramer)\ **Post date:** [October 18, 2023, 2:58pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/752 "2023-10-18T14:58:43Z")
Hi there, iam new on homey - on my old Smart Hoem Control from homee - i can locked the switch for parents controll. Do you have the setting in the app? ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [October 18, 2023, 3:00pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/753 "2023-10-18T15:00:34Z")
Homey doesn’t have parental controls. ---
**Author:** ![Andre\_Kramer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andre_kramer/32/79084_2.png) [@Andre\_Kramer](https://community.homey.app/u/Andre_Kramer)\ **Post date:** [October 18, 2023, 3:10pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/754 "2023-10-18T15:10:34Z")
oh no ☹ thats by homee in the settings for the fibaro roller shutter. Please implement the function 🙂 ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [October 18, 2023, 3:21pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/755 "2023-10-18T15:21:17Z")
I think you mean if the physical button should be disabled as kids-lock? You can add a ‘push confirmation’ to your phone, like When… -fibaro down was pressed And… -send push confirmation to André with “Someone wants to close the blinds by “fibaro down”. Is that OK”? Yes | No Then… -close the blinds Now, when you don’t respond, or answer with “No”, the flow does not continue. Kids now can push the fibaro what they want. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [October 18, 2023, 3:34pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/756 "2023-10-18T15:34:36Z")
No, with the physical buttons it’s of course not possible! Because the RS2 acts at the physical buttons like a normal dump roller shutter switch. The RS2 works even when Homey is off. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [October 18, 2023, 3:59pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/757 "2023-10-18T15:59:04Z")
I see, you’re right. ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [October 18, 2023, 4:06pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/758 "2023-10-18T16:06:37Z")
you should ask the developer (Athom) to implement protection mode, we community can’t do that. Technically I could create a raw command for locking and unlocking for you until it implmented (as it can probably take a while), but i’ll will get a bit technical, has to be on Homey Pro (Homey cloud with bridge isn’t possible), and your devices do need to be included unsecure. ---
**Author:** ![Andre\_Kramer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andre_kramer/32/79084_2.png) [@Andre\_Kramer](https://community.homey.app/u/Andre_Kramer)\ **Post date:** [October 18, 2023, 7:30pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/759 "2023-10-18T19:30:05Z")
Where can i contact athom? youre idea is Great ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [October 18, 2023, 8:54pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/760 "2023-10-18T20:54:47Z")
Support: > **[Support | Homey](https://homey.app/en-us/support/)** As for the raw commands, use the “Send raw command” flow card you’ll need to enable “power user” in the mobile app’s experiments settings menu, to get it. ![z-wave raw](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/3/337a68bc5b396feec740f371755de8d3f68b0122.jpeg) `Node ID,` you can find this on the [developer webpage - Z-Wave](https://tools.developer.homey.app/tools/zwave). the commands (/parameters) that should work (untested): unlocked: `0x75, 0x01, 0x00, 0x00` locked locally only: `0x75, 0x01, 0x02, 0x00` locked fully: `0x75, 0x01, 0x02, 0x01` ---
**Author:** ![Andre\_Kramer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andre_kramer/32/79084_2.png) [@Andre\_Kramer](https://community.homey.app/u/Andre_Kramer)\ **Post date:** [October 23, 2023, 8:05am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/761 "2023-10-23T08:05:06Z")
> [@Caseda](#): > > 0x75, 0x01, 0x00, 0x00 Thanks Caseda - it´s Works for me 🙂 ---
**Author:** ![Willau](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willau/32/81235_2.png) [@Willau](https://community.homey.app/u/Willau)\ **Post date:** [November 1, 2023, 10:51am UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/762 "2023-11-01T10:51:36Z")
Hello everyone, I would like your help because I installed two FGR-223 modules to control my roller shutters. I have no problem with my homey pro integrating them. They work well. On the other hand, I have a problem with the associations and my monostable switch. I am able to make the association well since I can control the two roller shutters with the same switch. But the different behaviors don’t work. For example, I set the value 3 to parameters 40 and 41, so it should raise/lower the 2 shutters when I make two short presses on the switch but it does not work. A single press makes them go up/down together. Same result with value 15 (long press), it does not take the parameters into account. Here is a screenshot of the module settings. Thank you in advance for your help ![FIbaro FGR-223](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/0/70cede064bf29203dba5f366b3c471e94e31594a.jpeg) ---
**Author:** ![Beate\_Gr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/beate_gr/32/80328_2.png) [@Beate\_Gr](https://community.homey.app/u/Beate_Gr)\ **Post date:** [November 25, 2023, 10:49pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/763 "2023-11-25T22:49:26Z")
I tried everything but I can’t get the S2 inputs on my Fibaro Dimmer 2 devices to trigger a flow. Scene activation in advanced settings is set to “Yes” Flow should trigger on Momentary Press of S2 am I doing anything wrong here? (Flow works when triggered from App) ![IMG_88BC56CB0136-1](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/4/d4cec477f9615742e191f5e508f79ad7ea2bb1e0.jpeg) ---
**Author:** ![Beate\_Gr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/beate_gr/32/80328_2.png) [@Beate\_Gr](https://community.homey.app/u/Beate_Gr)\ **Post date:** [November 25, 2023, 10:50pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/764 "2023-11-25T22:50:08Z")
![IMG_D211A9DCED2D-1](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/f/3f832fc42cb28c57b653d0295a6c379b34d7823a.jpeg) ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [November 26, 2023, 12:13pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/765 "2023-11-26T12:13:21Z")
Is the correct switch type selected? Are there more setting options in the advanced device settings? Don’t use the Dimmer 2 myself. ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [November 26, 2023, 12:28pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/766 "2023-11-26T12:28:07Z")
Maybe you have to add asociation groups 2 and/or 3 ( make same as group 1 ) ---
**Author:** ![Beate\_Gr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/beate_gr/32/80328_2.png) [@Beate\_Gr](https://community.homey.app/u/Beate_Gr)\ **Post date:** [November 26, 2023, 1:40pm UTC](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362/767 "2023-11-26T13:40:30Z")
No more settings. Switch type momentary press is selected, yes. [Previous page](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362.md?page=36) [Next page](https://community.homey.app/t/app-fibaro-your-home-is-your-castle-by-athom/362.md?page=38)