# \[APP\] Eglo - Light up your world **URL:** \ **Category:** Apps\ **Tags:** homey-pro, homey-bridge\ **Created:** [November 28, 2022, 11:45am UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781 "2022-11-28T11:45:38Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![drenso](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/drenso/32/41300_2.png) [@drenso](https://community.homey.app/u/drenso)\ **Post date:** [November 28, 2022, 11:45am UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/1 "2022-11-28T11:45:38Z")
Central Topic for Eglo App for Zigbee devices. Also known as AwoX Zigbee > This thread is not monitored by the Brand or Developer EGLO Leuchten GmbH > For Official support use the Email link in the App support (currently [mailto:homey-eglo@drenso.nl](mailto:homey-eglo@drenso.nl) ) > **[Eglo | Homey](https://homey.app/en-us/app/com.eglo/Eglo/)** > > Light up your world Discover the smart world with EGLO and Homey! Connect the wide range of EGLO Zigbee lighting devices and accessories (connect.z, crosslink.z and Smart Choice) with Homey to unlock the full potential of your products. Adjust the RGB color, brightness, set your preferred white temperature and start creating your best automations. Control your environment with your app, your remote or your favorite voice assistant at the same time! At this moment the App supports these type of devices ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/9/6985bb9a4c6826b9afa492b01eac5f2e98272901.png) ---
**Author:** ![drenso](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/drenso/32/41300_2.png) [@drenso](https://community.homey.app/u/drenso)\ **Post date:** [November 28, 2022, 11:45am UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/2 "2022-11-28T11:45:49Z")
Reserved ---
**Author:** ![Dijker.G](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dijker.g/32/46973_2.png) [@Dijker.G](https://community.homey.app/u/Dijker.G)\ **Post date:** [December 5, 2022, 2:46pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/4 "2022-12-05T14:46:31Z")
I Asked the Developer: > Great to have an official App, is it possible to have Homey set a Flame mode on the Light Device? Response: > Developer: Thank you for your review! Unfortunately we do not support Flame mode control over ZigBee, you will have to use the HomeControl app to enable that. ---
**Author:** ![Austriacus](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/austriacus/32/75331_2.png) [@Austriacus](https://community.homey.app/u/Austriacus)\ **Post date:** [August 16, 2023, 9:20pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/5 "2023-08-16T21:20:44Z")
Hello Has anyone experience to connect EGLO LED panels via Zigbee, so far they are not supported by this app? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [August 16, 2023, 9:50pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/6 "2023-08-16T21:50:14Z")
> [@Austriacus](#): > > Has anyone experience to connect EGLO LED panels via Zigbee I expect all Light devices are supported (only showing a bulb) but would suggest to ask the Developers as mentioned in the App Store: > **Support** [Contact »](mailto:homey-eglo@drenso.nl) ---
**Author:** ![Austriacus](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/austriacus/32/75331_2.png) [@Austriacus](https://community.homey.app/u/Austriacus)\ **Post date:** [August 16, 2023, 9:55pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/7 "2023-08-16T21:55:06Z")
Thank you Dijker. I already sent an email to the developer. i just was wondering if someone has this device already in use. You are right, the bulb could be a placeholder for all light devices. ---
**Author:** ![Austriacus](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/austriacus/32/75331_2.png) [@Austriacus](https://community.homey.app/u/Austriacus)\ **Post date:** [August 17, 2023, 5:02pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/8 "2023-08-17T17:02:14Z")
EGLO answered Like Dijker mentioned the bulb stands for all light devices from EGLO. They told me that it might be necessary to update the firmware via the Awox app in order to use the panels with Homey. In case someone else is interested in those devices. ---
**Author:** ![Abby](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/abby/32/11503_2.png) [@Abby](https://community.homey.app/u/Abby)\ **Post date:** [September 24, 2023, 5:34pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/9 "2023-09-24T17:34:01Z")
Quick question. Will the EGLO lightbulbs connect to the hue bridge (I am using the hue bridge in homey)? On every retail website, and review site it is said that the products (connect z) work with hue, but I can’t get it done, and I can’t find a how to. I used the EGLO app for homey and that works great by the way. It’s only that I have but two bulbs from EGLO on different storeys, so I’m a bit worried of the quality of the MESH network. All my lights (quite some), switches and sensors are connected to the hue bridge. ---
**Author:** ![Squiddy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/squiddy/32/78996_2.png) [@Squiddy](https://community.homey.app/u/Squiddy)\ **Post date:** [October 3, 2023, 10:12am UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/10 "2023-10-03T10:12:19Z")
Hello everyone! As I’m new to this I have no clue what to do and I can’t find anything through a google search either. I can’t get the Eglo remote 2.0 controller to work in Homey. I’ve installed the app and connected the unit as It should, so to this point everything is working. I’ve set up a flow as follow: WHEN: Brightness up pressed AND: THEN: Turn up the volume It works when using another remote such as an Ikea Trådfri (of course with the proper card for trådfri). The flow also works if I run it through the app. So I’m confident that the last part of it is working properly. As it only contains of two parts it has to be something with the Eglo remote. I’ve noticed there is two tags in the flow card, “Long press” and “Group”. Does it have something to do with this? Please, point me in to the right direction as I’m totally lost here. Best regards, Kent ---
**Author:** ![madebydirk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madebydirk/32/57774_2.png) [@madebydirk](https://community.homey.app/u/madebydirk)\ **Post date:** [October 25, 2023, 6:20pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/11 "2023-10-25T18:20:14Z")
I have the same issue: the remote 2.0 is connected and flow items are available, but none of them work… ---
**Author:** ![drenso](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/drenso/32/41300_2.png) [@drenso](https://community.homey.app/u/drenso)\ **Post date:** [November 7, 2023, 9:31am UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/12 "2023-11-07T09:31:29Z")
There is a known firmware issue with the remotes in combination with the 2023 Homey Pro due to changes in the Homey platform. If you want to be updated when it will work again, make sure to send us an email at [homey-eglo@drenso.nl](mailto:homey-eglo@drenso.nl) (we do not check this forum, it is pure coincidence I saw this). ---
**Author:** ![madebydirk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madebydirk/32/57774_2.png) [@madebydirk](https://community.homey.app/u/madebydirk)\ **Post date:** [November 17, 2023, 9:16pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/13 "2023-11-17T21:16:57Z")
> [@Squiddy](#): > > I can’t get the Eglo remote 2.0 controller to work in Homey. I’ve installed the app and connected the unit as It should, so to this point everything is working. > > I’ve set up a flow as follow: > > WHEN: Brightness up pressed > AND: > THEN: Turn up the volume > > It works when using another remote such as an Ikea Trådfri (of course with the proper card for trådfri). The flow also works if I run it through the app. So I’m confident that the last part of it is working properly. As it only contains of two parts it has to be something with the Eglo remote. > I’ve noticed there is two tags in the flow card, “Long press” and “Group”. Does it have something to do with this? > > Please, point me in to the right direction as I’m totally lost here. > > Best regards, Kent thanks, sent you an email ---
**Author:** ![Ruud\_Silvertant](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ruud_silvertant/32/79224_2.png) [@Ruud\_Silvertant](https://community.homey.app/u/Ruud_Silvertant)\ **Post date:** [December 21, 2023, 3:12pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/14 "2023-12-21T15:12:31Z")
I connected a Eglo GRB pannel to Homey with the Eglo app. I created a virtual knob to switch the panel to dimmed green light. Works fine 🙂 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/5/d5936aa525019e6a96880edbfd9733e1e601f644.png) Allso created a knob to set the panel to 100% white light. This light however is blueisch. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/4/2419f77f72a78bf85656af94dc69d7a109442f09.png) How kan i set it to real white with a flow? ---
**Author:** ![Ruud\_Silvertant](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ruud_silvertant/32/79224_2.png) [@Ruud\_Silvertant](https://community.homey.app/u/Ruud_Silvertant)\ **Post date:** [December 21, 2023, 3:39pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/15 "2023-12-21T15:39:53Z")
Problem solved: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/3/b36aa4f6085ebf179f59aa691dc715e7c0aaf2c5.png) ---
**Author:** ![llal](https://avatars.discourse-cdn.com/v4/letter/l/85f322/32.png) [@llal](https://community.homey.app/u/llal)\ **Post date:** [February 24, 2024, 11:18am UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/16 "2024-02-24T11:18:03Z")
Hi, I installed the EGLO Zigbee RGB+TW (EGLO connect.z). Pairing to the iOS app works fine, but adding it in Homey does not work. I work with model: Homey Pro (Early 2019),version 10.0.6 After resetting the device, the iOS app can find the pairing session but Homey does not. ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [February 24, 2024, 10:15pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/19 "2024-02-24T22:15:58Z")
@llal > And it is a duplicate post, > therefore removed ! ---
**Author:** ![Den\_Fo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/den_fo/32/80522_2.png) [@Den\_Fo](https://community.homey.app/u/Den_Fo)\ **Post date:** [October 6, 2024, 5:43pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/20 "2024-10-06T17:43:32Z")
hi, I got this lamp [Eglo FRAIOLI-C Plafondlamp LED Nikkel mat 33229 | lichten.nl](https://www.lichten.nl/eglo-fraioli-c-plafondlamp-33229.html) which is wokring only over bluetooth, I assume I won’t be able to add it to homey? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [October 6, 2024, 5:46pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/21 "2024-10-06T17:46:34Z")
> [@Den\_Fo](#): > > which is wokring only over bluetooth, Nope but you should contact the Brand Eglo or the Ap Developer… > [@AppStore](#): > > This tread is not monitored by the Brand or Developer EGLO Leuchten GmbH > For Official support use the Email link in the App support (currently [mailto:homey-eglo@drenso.nl](mailto:homey-eglo@drenso.nl) ) ---
**Author:** ![Den\_Fo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/den_fo/32/80522_2.png) [@Den\_Fo](https://community.homey.app/u/Den_Fo)\ **Post date:** [October 6, 2024, 6:10pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/22 "2024-10-06T18:10:20Z")
> [@Dijker](#): > > but you should contact the Brand Eglo or the Ap Develope sorry, I’m not sure I understand, what for? Is there a chance? 🙂 ---
**Author:** ![Cihad\_Ozturk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cihad_ozturk/32/72456_2.png) [@Cihad\_Ozturk](https://community.homey.app/u/Cihad_Ozturk)\ **Post date:** [November 27, 2024, 10:57pm UTC](https://community.homey.app/t/app-eglo-light-up-your-world/72781/23 "2024-11-27T22:57:55Z")
Its been a year since you posted this and still no update. Its shows how much you care 🤮 [Next page](https://community.homey.app/t/app-eglo-light-up-your-world/72781.md?page=2)