# \[APP\] Easee charger - Small. Smart. Full of power **URL:** \ **Category:** Apps\ **Tags:** app, official\ **Created:** [June 25, 2020, 10:23am UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647 "2020-06-25T10:23:32Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![Johan\_Holmberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johan_holmberg/32/33966_2.png) [@Johan\_Holmberg](https://community.homey.app/u/Johan_Holmberg)\ **Post date:** [March 22, 2021, 12:53pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/42 "2021-03-22T12:53:46Z")
If you don’t get access to a demo-account to an equlizer I can create an account on mine for you to play around with 🙂 ---
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [March 23, 2021, 8:28am UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/43 "2021-03-23T08:28:31Z")
> [@Exile82](#): > > I have an itch for using different flows Same here 🙂 > [@Exile82](#): > > I cannot change the current, I only get a red question mark when flow runs. This should not be the case. If you check the advanced settings on the Easee charger device in Homey and scroll down to debug. There is both a last API error property and a log property - do you see anything interesting here? There is also a last command response property, ie if you (or Tibber) trigger a command on the charger the response will appear here. If you trigger the same action multiple times, ie set dynamic current to 10A - then a command response is only generated for the first command, the following won’t be accepted since they didn’t change anything. ---
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [March 23, 2021, 11:53am UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/44 "2021-03-23T11:53:37Z")
I have added a new action that will come in the next version where it will be possible to turn on and off smart charging. Thinking this should prevent any race conditions where Tibber wants one thing and your Homey flows something else. ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [March 23, 2021, 12:46pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/45 "2021-03-23T12:46:10Z")
Thanks Richard! Acutally, I tried it once more and then it worked, for some reason. I have also studied the debug part, I will look into that prior to posting here. Thanks ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [March 23, 2021, 12:47pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/46 "2021-03-23T12:47:05Z")
GREAT, that will be awesome. I have seen Tibber’s sometimes smart charging to some really stupid stuff, so it will be good to disable that during daytime, for instance! ---
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [March 23, 2021, 8:48pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/47 "2021-03-23T20:48:47Z")
I just released a new test version of the app with support for the Easee Equalizer device. This version also contains the new action, “turn on and off smart charging”. ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [March 24, 2021, 8:09pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/48 "2021-03-24T20:09:17Z")
Like a glove, will test that. Anyway that we can see the possibility to change the schedule in the interface as well? ![Screenshot_20210324-210859](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/0/4055bc5d26ea25176566e3c2b017509698d9dca2.jpeg) ---
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [March 24, 2021, 9:51pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/49 "2021-03-24T21:51:38Z")
This is an API to override a schedule `/api/chargers/{id}/commands/override_schedule` > Allows current session to charge immediately provided that schedule is the only mechanism stopping charge currently There are also endpoints for what they call `basic_charge_plan`, to get, update/create and delete a charge plan. I’ll look into what can be done. ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [March 25, 2021, 4:32pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/50 "2021-03-25T16:32:04Z")
> [@Richard\_B](#): > > There are also endpoints for what they call `basic_charge_plan` , to get, update/create and delete a charge plan. I’ll look into what can be done Awesome! ---
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [March 29, 2021, 2:11pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/51 "2021-03-29T14:11:18Z")
Available now in test version 1.1.1; create, delete and override schedule. I also changed actions for smart charging since previous test version. There are now three actions; Enable, disable and pause smart charging. ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [March 29, 2021, 6:40pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/52 "2021-03-29T18:40:09Z")
Like a boss, @Richard_B ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [March 31, 2021, 8:10pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/53 "2021-03-31T20:10:51Z")
Hi @Richard_B. I tried to change the allowed current now, and I got the red question mark when flow run. I check API error message that was triggered by the flow: 2021-03-31 22:08:50 Error: POST ‘/api/sites/0/circuits/0/settings’ failed, HTTP status code ‘403’, and message ‘{ type: ‘[RFC 7231 - Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content](https://tools.ietf.org/html/rfc7231#section-6.5.3)’, title: ‘Forbidden’, status: 403, traceId: ‘|2374e835-496dfeff1904a9e5.’ }’ at /lib/easee.js:476:39 at processTicksAndRejections (internal/process/task\_queues.js:97:5) Any suggestion? ---
**Author:** ![Richard\_B](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/richard_b/32/16805_2.png) [@Richard\_B](https://community.homey.app/u/Richard_B)\ **Post date:** [April 2, 2021, 1:48pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/54 "2021-04-02T13:48:29Z")
The error is clear I think, shouldn’t contain zeros in the path (unless you omitted the proper id’s on purpose that is?) `/api/sites/0/circuits/0/settings` Some API settings are rate limited, ie number of times you can call the API per minute. For this API there is also this comment. Do you have more than one charger? > The Circuit current can only be set/read by accessing the master on the Circuit. Setting or reading these values on a Slave is not valid. ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [April 2, 2021, 10:44pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/55 "2021-04-02T22:44:13Z")
Yeah, I realize that something went wrong. But only thing I did was to run a flow, changing the allowed current. ![SmartSelect_20210403-004521_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/b/9b0a4500f90c26d12f4dbc6e87b1433d93728335.jpeg) ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [April 7, 2021, 8:46pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/56 "2021-04-07T20:46:36Z")
Just for your info, I tested a flow looking like this, but it returns some errors: ![SmartSelect_20210407-224622_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/8/a83821c4537d2db585ad7409deb203cf01f1d40a.jpeg) 2021-04-07 22:43:51 Error: POST ‘/api/chargers/EH663229/commands/override\_schedule’ failed, HTTP status code ‘400’, and message ‘’{“errorCode”:410,“errorCodeName”:“ChargerDisconnected”,“type”:null,“title”:“Charger disconnected”,“status”:400,“detail”:"[Empty in production]",“instance”:null,“extensions”:{}}’’ at /lib/easee.js:476:39 at processTicksAndRejections (internal/process/task\_queues.js:97:5) ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 2, 2021, 6:45pm UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/57 "2021-05-02T18:45:32Z")
Anyone can recommend some good site for buying, for a good price , ideally in Germany ? (Wallbox Easee Home). Also apologies for hijacking the thread, but is this the only app of it’s sort for Homey ? ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [May 19, 2021, 9:34am UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/58 "2021-05-19T09:34:54Z")
Sorry for late reply, but try to contact Easee and see if they have any german retailer. Otherwise, you should be able to buy it from Sweden, thanks to EU it should be simple ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 19, 2021, 10:18am UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/59 "2021-05-19T10:18:22Z")
Thank you - no problem, in the mean time I ordered it from [voltus.de](http://voltus.de). I got it even installed however I’m not sure on one thing, maybe you will know…is Easee somehow “monitoring” possible power net utilization/available capacity or it’s just defined based on amperes of socket safety circuit and house safety circuit breaker ? So when I would like to adjust it eg. based on available capacity, I shall be using “Set dynamic circuit current”, right ? ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [May 19, 2021, 10:43am UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/60 "2021-05-19T10:43:48Z")
Oh that is good!! The seetings made by the guy that installed is mostly your max of your main current (in my house it is 20A), and the Easee is assigned a max current based on that (in my case 16A). When it comes to monitoring and load balancing, unfortunately you need a power meter of some sort (I do know that easee has their own for about €150). This will enable true load balancing based on actual usage. From my own experience, I tend to have the washing machine, dishwasher and other stuff running at night, but also charge my car. In this perspective, 20A isn’t that much, so I need to keep an eye manually on my charger in order to not blow a main fuse. We are looking in to build a new house, so I am not that found of the idea to purchase anything more to the charger. ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 19, 2021, 11:16am UTC](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647/61 "2021-05-19T11:16:47Z")
> [@Exile82](#): > > … so I need to keep an eye manually on my charger in order to not blow a main fuse. Similar to my case, that’s why I have for some time already Aeotec Home Energy Meter Gen5, so I’m thinking to implement some logic using “Set dynamic circuit current” , basically if current \> x A AND not charging car → Lower Dynamic current and vice versa… let’s see how/if that will work, but first I need to do some adjustments 😉 [Previous page](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647.md?page=2) [Next page](https://community.homey.app/t/app-easee-charger-small-smart-full-of-power/31647.md?page=4)