# \[APP\]\[Cloud & Pro\] Somfy Tahoma & Connexoon (v4.0.124, test v4.0.152)
**URL:** https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206
**Category:** Apps
**Tags:** official, homey-pro
**Created:** [September 29, 2020, 3:01pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206 "2020-09-29T15:01:37Z")
**Posts on this page:** 20
**Page:** 64
### Author:  [@Jurgen\_Jacobs](https://community.homey.app/u/Jurgen_Jacobs)
#### Post date: [October 1, 2022, 6:37am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1267 "2022-10-01T06:37:43Z")
I’ve just noticed that i’m already getting the 3000ms timeout while entering my credentials.
When proceeding it seems to validate the credentials resulting in just " error". The logs remain empty.
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 1, 2022, 6:56am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1268 "2022-10-01T06:56:04Z")
Could you update to the test version by adding test to the end of the URL for the app in the store.
---
### Author:  [@Jurgen\_Jacobs](https://community.homey.app/u/Jurgen_Jacobs)
#### Post date: [October 1, 2022, 7:16am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1269 "2022-10-01T07:16:18Z")
Thanks for the support Adrian (it most be a full time job on the side),
After restarting my homey for the 3rd time i was able to login. (using 3.0.35)
---
### Author:  [@TheSource](https://community.homey.app/u/TheSource)
#### Post date: [October 1, 2022, 10:32pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1270 "2022-10-01T22:32:12Z")
I’m about to get the Atlantic Fujitsu Alfea Extensa heatpump with Atlantic Fujitsu Cozytouch Bridge. From the devices search I understand that I can connect that via this App. However it as asking for a Somfy login. Is anybody famiiar how I can connect them or how this works?
Is seems that Cozytouch can use the Somfy IO protocol. from the FAQ
> **[Home - Cozytouch](https://cozytouch.fr/)**
>
> COZYTOUCH
>
> COZYTOUCH is an app for managing your thermal comfort appliances remotely from a smartphone or tablet.
> Remote connectivity and control of electric heaters, electric water heaters, heat pump water heaters, heat pumps, boilers and...
To pair the IO devices, how can I connect the Cozytouch bridge?
The bridge has to be connected to a power supply (using the USB cable or plug adapter) and to be connected to the internet box through the ethernet cable (RJ45).
If I cannot control this brand with Homey I will consider another brand/setup.
@Ben_Proquin you also asked about this, did you get it working?
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 2, 2022, 6:45am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1271 "2022-10-02T06:45:04Z")
This app only works if you have a Somfy account with one of the Somfy hubs (Tahoma, Connexoon, etc). I’m not sure how other users have connected their Atlanta devices but my guess is they use a Tahoma hub.
Maybe someone that his done this can confirm?
---
### Author:  [@Sebastian\_w](https://community.homey.app/u/Sebastian_w)
#### Post date: [October 2, 2022, 4:16pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1272 "2022-10-02T16:16:30Z")
Hi Adrian,
Thanks for creating this app. I have a Somfy Tahoma that has been successfully included to Homey. I have four Somfy IO external window blinds connected to the tahoma hub, that I currently control through the Tahoma app or by a Situa 5 remote.
However, when trying to add the external IO blinds to Homey I get the message that “No new devices have been found”. I have tried several times over the last few days, restarted Homey and downloaded both the beta version of the app and the latest published version.
I have just sent the device log through the app.
Am I doing something wrong?
---
### Author:  [@stephane\_masson](https://community.homey.app/u/stephane_masson)
#### Post date: [October 2, 2022, 4:20pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1273 "2022-10-02T16:20:31Z")
Hello Adrian
Have you a chance to take a look at it 😀
Have a nice weekend
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 2, 2022, 4:46pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1274 "2022-10-02T16:46:59Z")
Sorry I can’t remember 😁
Thanks for reminding me, I will look this evening.
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 2, 2022, 4:48pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1275 "2022-10-02T16:48:55Z")
I think I have your log so will take a look.
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 2, 2022, 5:01pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1276 "2022-10-02T17:01:35Z")
I can see the card’s in my Homey so it seems I have done it. Could you try the test version to see if I have published it?
---
### Author:  [@stephane\_masson](https://community.homey.app/u/stephane_masson)
#### Post date: [October 2, 2022, 5:56pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1277 "2022-10-02T17:56:04Z")
I have cheked and install test version and device again. But I still cannot see action card on the I/O heating wire pilot controler.
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 2, 2022, 6:35pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1278 "2022-10-02T18:35:52Z")
Ok, I will check that one.
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 3, 2022, 6:42am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1279 "2022-10-03T06:42:15Z")
The log I am looking at has the following device names: “TV-stue”, “Kjøkken”, “Kontor”, eyc so if that is correct then it looks like you can add your blinds using the “Awning / Pergola (io)” / “Buitenzonwering / Pergola (io)”. I know it’s confusing but the app works on the internal “controllableName” provided by Somfy and integrators are starting to repurpose the motors for other types of covers.
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 3, 2022, 7:44am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1280 "2022-10-03T07:44:10Z")
I have published a new test version. Hopefully I have the right device this time 🙂
---
### Author:  [@stephane\_masson](https://community.homey.app/u/stephane_masson)
#### Post date: [October 3, 2022, 9:37am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1281 "2022-10-03T09:37:49Z")
Thank you for your effort unfortunatly no changes. New versions was installed on my Homey, I have restart it and reinstalled the device but still no cards. Only possible to control them in manual but not in a flow. You could find in attached some screenshot.
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 3, 2022, 9:55am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1282 "2022-10-03T09:55:59Z")
OK, I keep picking the wrong device, so back to the drawing board.
Could you send the device log from the Configure App screen so I can see what devices you have and then hopefully I will get the correct ones. They should all support the flows, but as there are over 100 different devices, it can take a long time to track them down.
---
### Author:  [@stephane\_masson](https://community.homey.app/u/stephane_masson)
#### Post date: [October 3, 2022, 10:09am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1283 "2022-10-03T10:09:01Z")
No problems, I just send you the log device and errors
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 3, 2022, 11:44am UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1284 "2022-10-03T11:44:35Z")
OK, new version. Hopefully I got the correct device this time.
---
### Author:  [@stephane\_masson](https://community.homey.app/u/stephane_masson)
#### Post date: [October 3, 2022, 12:59pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1285 "2022-10-03T12:59:10Z")
It’s working perfectly thank you very much 😀
How can I give you something for your work, I don’t see any button to send you something.
---
### Author:  [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)
#### Post date: [October 3, 2022, 2:15pm UTC](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206/1286 "2022-10-03T14:15:59Z")
That’s good, I got there eventually 🙂
Athom don’t publish the contribute button for verified developers. My username on PayPal is adyrock but don’t worry if you haven’t got access to that as I create the apps for fun.
[Previous page](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206.md?page=63)
[Next page](https://community.homey.app/t/app-cloud-pro-somfy-tahoma-connexoon-v4-0-124-test-v4-0-152/35206.md?page=65)