# \[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home

**URL:** <https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156>\
**Category:** Apps\
**Tags:** app, zigbee\
**Created:** [August 22, 2018, 8:18pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156 "2018-08-22T20:18:09Z")\
**Posts on this page:** 1\
**Showing post:** 3135

<div class="post-metadata">

**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\
**Post date:** [April 13, 2021, 10:41am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3135 "2021-04-13T10:41:32Z")

</div>

No. I don’t know anything about zigbee. I only added 9 Aqara sensors (light, water, H/T, motion) to my 20 or so Shelly devices.

So, I only have 9 endpoint devices. They are all within 5m of my Homey.  
Do I need to reset the zigbee network to get my H/T running again?

edit: did a zigbee reset and now all my aqara devices are gone… ☹

You want the output?

> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[0: logIDInfo]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-  
> Homey HostName : homey-5e43bbc15e52de0c3db46c0f  
> Homey HomeyName : Homey van Stefijn  
> Wifi : DBlogic 38:0b:3c:e9:d1:31  
> ifconfig : 192.168.1.200:80  
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[1: ZigBee controllerState RAW data]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-  
> controllerState =\> {“panId”:33533,  
> “extendedPanId”:“dd:dd:dd:dd:dd:dd:dd:dd”,  
> “IEEEAddress”:“00:12:4b:00:1f:1f:9e:1e”,  
> “networkKey”:“01:03:05:07:09:0b:0d:0f:00:02:04:06:08:0a:0c:0d”,  
> “networkAddress”:0,  
> “channel”:11,  
> “chipVersion”:0,  
> “transportRev”:2,  
> “zstackVersion”:“2.6.3”}’  
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[2: logStatInfo]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-  
> Platform : linux 4.14.15-g3c513a6eca Node.JS v12.16.1  
> Model : Homey (Early 2019) - Model ID homey3s  
> CPUs #/Model/Speed : 1 x ARMv7 Processor rev 10 (v7l) - 996 Mhz.  
> Homey Firmware : 5.0.4  
> Memory Total : 488 MB - Free : 86192 KB - (17%)  
> Data and Time : dinsdag 13de april 2021 12:38:39 Zone Europe/Amsterdam [2021-04-13T10:38:39.687Z]  
> Uptime : 0d + 00:59:48  
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[3: Zigbee Network Data]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> 
> # Nodes : 9
> 
> # Routers : 0
> 
> # EndDevice : 9
> 
> # manufacturerNames : 2
> 
> > manufacturerNames : [“LUMI”,“XIAOMI”]
> 
> # modelIds : 4
> 
> > modelIds : [“lumi.weather”,“lumi.sen\_ill.mgl01”,“lumi.sensor\_motion.aq2”,“lumi.sensor\_wleak.aq1”]  
> > -=-=-=-=-=-=-=-=-=-=-=-=-=-[3b: routing is an ephemeral state and may change at any time]-=-=-=-=-=-=-=-=-=-=-=-=-=-
> 
> # Bad Routes : 0
> 
> # Routes 0 hops : 0
> 
> # Routes 1 hops : 0
> 
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[5: Devices active Routing]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-  
> Please add zigBee Routers to create a mesh network  
> For more info read  
> [https://support.athom.com/hc/en-us/articles/360019239879-Advice-on-building-a-stable-Zigbee-network](https://support.athom.com/hc/en-us/articles/360019239879-Advice-on-building-a-stable-Zigbee-network)  
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[6: Zigbee Health Advices]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-  
> Well-Known-Key used (CVE-2020-28952)  
> For more info read  
> [You Gotta Hack That | Penetration Testing Consultancy](https://yougottahackthat.com/blog/1260/athom-homey-security-static-and-well-known-keys-cve-2020-28952)  
> Please add more zigBee Routers to create a better mesh network  
> You only have 0 routers for 9 end-devices  
> For more info read  
> [https://support.athom.com/hc/en-us/articles/360019239879-Advice-on-building-a-stable-Zigbee-network](https://support.athom.com/hc/en-us/articles/360019239879-Advice-on-building-a-stable-Zigbee-network)  
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[7: Zigbee Reporting Data]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> 
> > reporting : 0,“00124b001f1f9e1e”,3,false,“Homey (Early 2019)”,“5.0.4”,0,11,0,2,“2.6.3”,9,0,9,2,4,0,true,“#”,0,0,0 , $
> 
> ———————————————————  
> ✅ Script Success  
> ↩ Returned: "Please report above text back on Community [[Community Survey] Homey v5 ZigBee Health check and statistics collection (HomeyScript)](https://community.homey.app/t/44231)

---

_[View the full topic](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156)._