# \[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home **URL:** \ **Category:** Apps\ **Tags:** app, zigbee\ **Created:** [August 22, 2018, 8:18pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156 "2018-08-22T20:18:09Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 22, 2018, 5:41pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/42 "2018-09-22T17:41:21Z")
> [@Eek](#): > > I also cannot pair my new devices: No Zigbee device found… > > - aqara human body sensor (2) > - wireless switch (2) I suspect that the inclusion process is timing out and the devices goes to sleep before the inclusion process finishes… Can you try, when including these devices to follow these (additional) steps: 1. Include the device at close proximity of Homey 2. Follow the inclusion instructions 3. Once the blue led is blinking, keep pressing the button once every 2 seconds 4. It should show a message like “interviewing cluster x of y”, every time that this message changes, press the button… ---
**Author:** ![Eek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eek/32/2581_2.png) [@Eek](https://community.homey.app/u/Eek)\ **Post date:** [September 22, 2018, 6:32pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/43 "2018-09-22T18:32:35Z")
Thanks for the quick reply! 1. I hold the device almost against the homey. 2. Only this instruction is given, there is no next step: ![20](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/4/444dea3da1fb8623a59bbe0826db57b45277ffe3.png) 3. i’ll tried that many times, but I think it is only usefull when the app is in the next step 4. That step isn’t coming up. ( anymore; I recognize this step from the previous correct paired devices) I restarted the app, restarted homey, tried to remove 1 device, but that didn’t succeeded (did not tried to remove the device using pairing mode on device). Anymore tips? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 22, 2018, 6:42pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/44 "2018-09-22T18:42:34Z")
> [@Eek](#): > > I restarted the app, restarted homey, tried to remove 1 device, but that didn’t succeeded (did not tried to remove the device using pairing mode on device). Anymore tips? Did you try to remove the device by going to Settings \> Zigbee \> remove device \> put the device in inclusion mode / wake-up the device? Alternative, remove the battery from the device and retry removal / inclusion. ---
**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\ **Post date:** [September 22, 2018, 7:07pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/45 "2018-09-22T19:07:50Z")
I had the same problem when adding a device today, added my findings to the issue on github. > ---
**Author:** ![Eek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eek/32/2581_2.png) [@Eek](https://community.homey.app/u/Eek)\ **Post date:** [September 23, 2018, 8:51am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/46 "2018-09-23T08:51:58Z")
I succeeded in removing the device with ‘pairing/inclusion mode’. After that, I can add an other device!! As mentioned before: I’ ve already installed 8 devices with this app on Homey. I’ ve also installed 1 other zigbee device via Phillips Hue app on Homey. Besides Homey I also have 2 hue bridges running. Those 2 Hue bridges contains 30+lights and 20+ accessoires It looks like something is ‘full’? The app? The homey? Zigbee? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 23, 2018, 8:59am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/47 "2018-09-23T08:59:21Z")
There is a limitation that you are only able to add 20 battery powered `EndDevice`'s per (non-battery powered) `Router` device. See also [https://github.com/athombv/homey/issues/2160](https://github.com/athombv/homey/issues/2160) As far as I’m aware this is within 1 Zigbee network… so having 2 HUE bridges / other zigbee networks should not matter. ---
**Author:** ![Eek](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eek/32/2581_2.png) [@Eek](https://community.homey.app/u/Eek)\ **Post date:** [September 23, 2018, 11:12am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/48 "2018-09-23T11:12:16Z")
Because it was also not possible to add a device via de philips hue zigbee app on Homey, I decided to reset the zigbee network (homey settings --\> zigbee --\> reset zigbee). Now I can add al my devices!! (and must fix the flows) My Sunday is a happy Sunday. Thanks for the support! ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 23, 2018, 11:53am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/49 "2018-09-23T11:53:34Z")
Enjoy your happy Sunday! ---
**Author:** ![tmaniac](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tmaniac/32/338_2.png) [@tmaniac](https://community.homey.app/u/tmaniac)\ **Post date:** [September 24, 2018, 2:34pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/50 "2018-09-24T14:34:47Z")
So i’m having some trouble using my Aqara human body motion sensor… Perhaps my thinking is wrong, plx helpz! 😉 I have the Aqara Human Body sensor in my kitchen. Flow 1; Start the kitchen timer ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/2/22d6083ec82f91f8a87afd49e828e618a5aa6ec3.jpeg) Flow 2; Reset the kitchen timer ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/c/cac502215cfcd64ed921693728b8e582ef9dbea6.jpeg) Flow 3; Turn on the lights ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/f/f450a27a29fd6b89139b25f6899a55e3af20af26.jpeg) Flow 4; Turn off the lights ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/3/348ad3dd9f21aed6a0ce8fe2d559080330a6984c.jpeg) So, the issue…when i walk into the kitchen, the lights turn on (score!) But, if i move around in the kitchen…the lights go out after around 90 seconds. Sensor settings under devices: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/7/7cdb813de56231f590fce5b7915bdf4c894524b8.png) This is not what should happen ☹ What am i doing wrong? ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [September 24, 2018, 2:38pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/51 "2018-09-24T14:38:09Z")
U need to set the timer when motion goes off. When motion–Turn on the lights and stop the timer When motion is off–start timer When timer=empty–Kill the lights ---
**Author:** ![Paul](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul/32/12987_2.png) [@Paul](https://community.homey.app/u/Paul)\ **Post date:** [September 24, 2018, 7:02pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/52 "2018-09-24T19:02:25Z")
> [@TedTolboom](#): > > > [@orecus](#): > > > > Any updates on adding support for this one? I just ordered one and thought it would a great match for triggering when the letterbox is triggered, instead of a window contact sensor. 🙂 > > I’m awaiting some new capability icons which should become available mid of next week… then I’ll finalize the driver of the Aqara Vibration sensor. > > > [@Paul](#): > > > > I cannot pair my new (4x) Xiaomi Mi ZigBee - Aqara Wireless Remote Switch Double (WXKG02LM) with Homey. > > No ZigBee device found …? > > How many Zigbee (router vs endpoint) devices did you already include to Homey’s Zigbee network? 3 x EndDevice 8 x Router 1 x Coordinator (Homey) 2 x EndDevice vc Router I do not think that the # of EndDevices is a problem. Especially because after not being able to pair my new (4x) Xiaomi Mi ZigBee - Aqara Wireless Remote Switch Double (WXKG02LM) with Homey, I succeeded to pair 2 x Xiaomi Mi ZigBee, Aqara Human Body Sensors. And it works fine. Paul ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 24, 2018, 8:20pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/53 "2018-09-24T20:20:23Z")
> [@Paul](#): > > Especially because after not being able to pair my new (4x) Xiaomi Mi ZigBee - Aqara Wireless Remote Switch Double (WXKG02LM) with Homey, I succeeded to pair 2 x Xiaomi Mi ZigBee, Aqara Human Body Sensors. And it works fine. @Paul, not being able to pair or pairing is successfull, but the device is added as “generic Zigbee device”? There are some more reports that Xiaomi / Aqara changed the ID’s of the devices (without changing the product number)… therefore during inclusion the right app / driver can not be found. First tests show that simply adding the additional ID’s doesn’t result in a working driver… so it appears that more has been changed. Can you post a screenshot of the Device information (ID’s)? ---
**Author:** ![Paul](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul/32/12987_2.png) [@Paul](https://community.homey.app/u/Paul)\ **Post date:** [September 24, 2018, 8:52pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/54 "2018-09-24T20:52:17Z")
![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/1/1e4593b2c0f9711ceb35060cf7e9ac56a6dd48af.png) Like this ? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 24, 2018, 8:59pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/55 "2018-09-24T20:59:40Z")
😫 yep, same issue… WTF… ---
**Author:** ![Eternity](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eternity/32/102113_2.png) [@Eternity](https://community.homey.app/u/Eternity)\ **Post date:** [September 25, 2018, 6:53am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/56 "2018-09-25T06:53:43Z")
That is too bad, Ted! Why on earth do they change device ID’s? Other controllers must also have issues with changing ID’s… I am sure you will be able to solve it again (like with the same ID mess with the Eurotronics Spirit valves). Good luck!! ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 25, 2018, 3:41pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/57 "2018-09-25T15:41:28Z")
So, it appears that Xiaomi / Aqara made some breaking firmware changes to the Aqara wireless switches (known today)… without changing the product numbers… A quick fix (adding the new ID’s) to the existing drivers does not result in working devices… #backtosquareone That means that I’ll need to get my hands on the new affected devices, to create new drivers and also to be able to provide support. Ordering at Ali, taking lead time and uncertainty on which version I will get, is no option. So, best option is to call for community support… (that is you!) I’m currently looking for community members that have the following devices, which they are willing to send to me (in the Netherlands): 1. [Aqara Wireless switch (WXKG11LM)](https://xiaomi-mi.com/sockets-and-sensors/xiaomi-aqara-smart-wireless-switch/) which has the Product ID (in Homey): `lumi.remote.b1acn01` \> provided by @Mustang 2. [Aqara Wireless Remote Switch Single (WXKG03LM)](https://xiaomi-mi.com/sockets-and-sensors/aqara-smart-light-wall-switch-single-key/) which has the Product ID (in Homey): `lumi.remote.b186acn01` 3. [Aqara Wireless Remote Switch Double (WXKG02LM)](https://xiaomi-mi.com/sockets-and-sensors/remote-switch-for-aqara-smart-light-wall-switch-double-key/)which has the Product ID (in Homey): `lumi.remote.b286acn01` \> provided by @Paul Can you send me a direct message on the forum or on [Slack](https://athomcommunity.slack.com/team/tedtolboom)? In addition, I’m also looking for some sponsors that are willing to support this activity / app through a [paypal contribution](https://www.paypal.me/TedTolboom) and that will help to compensate the members sending these devices to me; so they can order a replacement and so that I can add support for these devices… Who is willing to support? ---
**Author:** ![Emile86](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/emile86/32/606_2.png) [@Emile86](https://community.homey.app/u/Emile86)\ **Post date:** [September 25, 2018, 3:59pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/58 "2018-09-25T15:59:16Z")
20€ + Thanks for your work ---
**Author:** ![Eternity](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eternity/32/102113_2.png) [@Eternity](https://community.homey.app/u/Eternity)\ **Post date:** [September 25, 2018, 6:10pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/59 "2018-09-25T18:10:05Z")
Can’t help with the mentioned devices, but did make a donation. Good luck Ted ---
**Author:** ![Marius\_Muresan](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marius_muresan/32/9541_2.png) [@Marius\_Muresan](https://community.homey.app/u/Marius_Muresan)\ **Post date:** [September 25, 2018, 6:46pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/60 "2018-09-25T18:46:01Z")
@TedTolboom , i´ll be happy to send it to you ( the smart switch), just give me an adress 🙂 Hilox with issue no. #90 in github Update: i see now that Mustang provided you with one so hopefully my 20EUR will make some difference 🙂 I dont have the other devices. Thanks for your work. (Y) ---
**Author:** ![PhilS](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/phils/32/12941_2.png) [@PhilS](https://community.homey.app/u/PhilS)\ **Post date:** [September 25, 2018, 7:32pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/61 "2018-09-25T19:32:46Z")
@TedTolboom 15€ donation from good old germany to you. Hope you will work on this app in the future. I think my wxkg02lm would be to expensive to send? But if there is Nobody Then please contact me and i will send it to you. Greeds Philipp [Previous page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=2) [Next page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=4)