# \[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home **URL:** \ **Category:** Apps\ **Tags:** app, zigbee\ **Created:** [August 22, 2018, 8:18pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156 "2018-08-22T20:18:09Z")\ **Posts on this page:** 20\ **Page:** 293
**Author:** ![Morten\_HP23](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Morten\_HP23](https://community.homey.app/u/Morten_HP23)\ **Post date:** [September 19, 2024, 8:52pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6122 "2024-09-19T20:52:27Z")
For Single Switch Module T1 (with neutral), when changing the state on the physical switch, Homey app does not get updated with the new state. This has been an issue for some time (at least since May) and mentioned by a few earlier, without a solution. Is there a fix for this planned in the near future? ---
**Author:** ![bierre](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bierre/32/9522_2.png) [@bierre](https://community.homey.app/u/bierre)\ **Post date:** [September 20, 2024, 5:22am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6123 "2024-09-20T05:22:06Z")
Since a week or so I’m experiencing problems with the wireless switch double (2018). Can’t fix the Connection. I have multiple. Also the smaller buttons don’t seem to work all of a sudden. Anyone else experiencing the same? Could this be related to a recent app update? ---
**Author:** ![RickB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rickb/32/47671_2.png) [@RickB](https://community.homey.app/u/RickB)\ **Post date:** [September 20, 2024, 11:13am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6124 "2024-09-20T11:13:35Z")
Hi Ted, the T1 door and window sensor is still not functioning following the recent update (incase the update was aimed at this device). Thanks for all your work on this app!! ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 23, 2024, 7:05am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6125 "2024-09-23T07:05:01Z")
Version 1.10.1 of the Aqara app has just been uploaded to the app store: [Aqara App for Homey | Homey](https://homey.app/a/com.xiaomi-mi/) **Changelog:** > - Add support for the Cube T1 Pro (CTP-R01), > - Add support for the Light Sensor T1 (GZCGQ11LM) > - Add support for the Dual relay module T2 (DCM-K01) > - Add ‘decoupling mode’ and ‘LED inversion’ to the Wall switch H1 series (fix reporting issue on the single button version). @Adrian_Andrei this update will fix the issue that for the single button H1 switches the scene triggers were not working. @Austriacus time to open the drawer 😉 ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 23, 2024, 7:36am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6126 "2024-09-23T07:36:36Z")
Following-up on some of the issues reported: **Aqara T1 sensor issues (on the HP2019Pro):** > [@TedTolboom](#): > > I will try to reproduce the T1 issues on the HP2019 in the next days. > [@RickB](#): > > Hi Ted, I’m having this issue with the T1 Door and Window Sensor too. The T1 door and window sensor pairs to homey, > [@Dennis\_Bech](#): > > aqara water leak sensor t1 not working in homey 2019 does anyone know how to fix it or have you given up? > [@RickB](#): > > Hi Ted, the T1 door and window sensor is still not functioning following the recent update (incase the update was aimed at this device). I’m trying to reproduce these issues, on both the HP2023 as well as the HP2019. On both platforms, the Door & Window sensor T1, the Water leak sensor T1 and the Temperature & Humidity sensor T1 can be included and keep reporting state changes. I am not able to reproduce these issues. In order to rule out device firmware issues (some have mentioned this as potential cause), I will see if I can add a readable firmware version to the settings of these devices. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 23, 2024, 7:40am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6127 "2024-09-23T07:40:06Z")
**Aqara T1 switch (with Neutral) issues:** > [@Par\_Ostberg](#): > > I noticed that my T1 switch with neutral stoped reporting watt in may this year. > [@Herman\_Rand](#): > > Hi, I’ve encountered an issue with Aqara Single Switch (lumi.switch.n0agl1), not sure if it’s after the latest update but anyway. > I can’t seem to be able to command the output anymore, used to work fine. I’m getting feedback when the physical switch is turned on. > [@Morten\_HP23](#): > > For Single Switch Module T1 (with neutral), when changing the state on the physical switch, Homey app does not get updated with the new state. > > This has been an issue for some time (at least since May) and mentioned by a few earlier, without a solution. I also tried to reproduce these issues, both on the HP2023 and HP2019. But also fail to reproduce these issues. There are some reports where this switch will stop reporting the power measurements after a power cut. Even with multiple power cuts, the devices I have available continue to report it’s power state. @Par_Ostberg @Morten_HP23 have you tried to remove the switch and re-add it to Homey? ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [September 23, 2024, 7:49am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6128 "2024-09-23T07:49:05Z")
> [@TedTolboom](#): > > I am not able to reproduce these issues. > [@TedTolboom](#): > > But also fail to reproduce these issues. @Par_Ostberg @Herman_Rand @Morten_HP23 @RickB @Dennis_Bech Do any of you have Thread devices managed by Homey? ---
**Author:** ![Herman\_Rand](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/herman_rand/32/71474_2.png) [@Herman\_Rand](https://community.homey.app/u/Herman_Rand)\ **Post date:** [September 23, 2024, 8:08am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6129 "2024-09-23T08:08:23Z")
No, I’m on HP2019. I’ve considered re adding the switch, but there’s a couple Aqara temp sensors using it as a router, so a little reluctant to do it. ---
**Author:** ![Morten\_HP23](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Morten\_HP23](https://community.homey.app/u/Morten_HP23)\ **Post date:** [September 23, 2024, 8:42am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6130 "2024-09-23T08:42:43Z")
When I remove the switch and add it again, it will work sometimes for a few das, sometimes for a week, but then again stop reporting the state back to the app. I have not been able to identify any event triggering that it stops working. @TedTolboom you can try leaving yours connected for a while, and see if you can reproduce. ---
**Author:** ![Morten\_HP23](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Morten\_HP23](https://community.homey.app/u/Morten_HP23)\ **Post date:** [September 23, 2024, 8:45am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6131 "2024-09-23T08:45:29Z")
@robertklep No Thread devices. ---
**Author:** ![RickB](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rickb/32/47671_2.png) [@RickB](https://community.homey.app/u/RickB)\ **Post date:** [September 23, 2024, 10:37am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6132 "2024-09-23T10:37:45Z")
No thread. HP2019 ---
**Author:** ![Glenn\_Seegers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/glenn_seegers/32/8353_2.png) [@Glenn\_Seegers](https://community.homey.app/u/Glenn_Seegers)\ **Post date:** [September 23, 2024, 10:49am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6133 "2024-09-23T10:49:50Z")
Same issue here with the switch, it just takes a while but it is guaranteed to stop reporting the power after a couple of weeks. Switch still works after the power reporting stops. (I have 5 of them and it’s the same for all) ![IMG_5302](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/f/6ff289b12f450dcd09dd8d3e424064d11146de03.png) ---
**Author:** ![Marc\_Verdiesen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marc_verdiesen/32/79082_2.png) [@Marc\_Verdiesen](https://community.homey.app/u/Marc_Verdiesen)\ **Post date:** [September 23, 2024, 1:41pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6134 "2024-09-23T13:41:45Z")
Yes, I have similar problems. After the 1.10.0 update the sensor did not detect movement anymore. My house also had a power-down in about the same time period so hard down of Homey too. Everything else worked fine after that the restart, but not the Aqara sensor. I replaced the battery but no change. I re-paired the sensor and it worked for a few hours, then stopped again. I removed the sensor from Homey, then added it again. Worked for a few hours, then stopped again. Just updated to 1.10.1 and re-paired the sensor. Will see how it goes. ---
**Author:** ![Austriacus](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/austriacus/32/75331_2.png) [@Austriacus](https://community.homey.app/u/Austriacus)\ **Post date:** [September 23, 2024, 4:51pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6135 "2024-09-23T16:51:46Z")
Sorry to say, but there are some issues with Cube T1 Pro. I connected it without problems to my Homey Pro 2023 and added a flow to switch off the music in one room. Therfore I used a simple setting with just a number on top of the cube. It didn’t work. In the list of flows description always said “3 on top” whatever number I selected. I tried other triggers and found that “turning 90 degrees” works. I tried more and selected “tap 2 times on top” - again it did not work. (I guess tapping on top means something like a double click with my finger on the cube) I also tried to change the mode from “scene” to “action” - but all I get is a timeout error after 10 seconds) BTW: Can someone explain what is the difference between this two modes? Does anybody else have this issues with Cube T1Pro? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 23, 2024, 5:26pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6136 "2024-09-23T17:26:40Z")
@Austriacus see my comments/clarification below: > [@Austriacus](#): > > I tried more and selected “tap 2 times on top” - again it did not work. (I guess tapping on top means something like a double click with my finger on the cube) No. It actually means double tapping with the Cube on a solid surface. > [@Austriacus](#): > > I also tried to change the mode from “scene” to “action” - but all I get is a timeout error after 10 seconds) ![Scherm­afbeelding 2024-09-23 om 19.11.25](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/5/a52ca10c7214f9b32b1598df1e51d4869569fa08.jpeg) See the to “wake up the Cube” comment in the device settings. > [@Austriacus](#): > > BTW: Can someone explain what is the difference between this two modes? Each mode has certain actions that can be triggered (and some not). The actions that can be activated are shown in the list of settings. ![Scherm­afbeelding 2024-09-23 om 19.11.42](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/2/d2792cb1795992fac8d3625b2b787f12f92109a6.jpeg) Main differentiating actions are Double Tap, Slide and pick up and hold. Unfortunately, within Homey it is not possible to dynamically enable or disable trigger flow cards. I will add a additional comment in this differentiating flow cards (scene mode only / action mode only). > [@Austriacus](#): > > I connected it without problems to my Homey Pro 2023 and added a flow to switch off the music in one room. Therfore I used a simple setting with just a number on top of the cube. It didn’t work. > In the list of flows description always said “3 on top” whatever number I selected. I’m not sure based on your description which flow card you used. Can you clarify? ---
**Author:** ![Austriacus](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/austriacus/32/75331_2.png) [@Austriacus](https://community.homey.app/u/Austriacus)\ **Post date:** [September 23, 2024, 6:38pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6138 "2024-09-23T18:38:45Z")
[**@Austriacus**](https://community.homey.app/u/austriacus) see my comments/clarification below: ![](https://sea1.discourse-cdn.com/flex015/user_avatar/community.homey.app/austriacus/48/75331_2.png)Austriacus: I tried more and selected “tap 2 times on top” - again it did not work. (I guess tapping on top means something like a double click with my finger on the cube) No. It actually means double tapping with the Cube on a solid surface. **Yes, I tried that too. Forgot to mention it** ![](https://sea1.discourse-cdn.com/flex015/user_avatar/community.homey.app/austriacus/48/75331_2.png)Austriacus: I also tried to change the mode from “scene” to “action” - but all I get is a timeout error after 10 seconds) [**![Scherm­afbeelding 2024-09-23 om 19.11.25](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/e/1e98e3ebe1e751f197c80b4a3e27ed6d3e368592.jpeg)**](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/5/a52ca10c7214f9b32b1598df1e51d4869569fa08.jpeg) See the to “wake up the Cube” comment in the device settings. **I misunderstood the note. I thought by pressing the save button the cube gets waked up.** **Anyway, shaking the button didn’t help. Still timeout after 10 seconds (close to Homey)** ![](https://sea1.discourse-cdn.com/flex015/user_avatar/community.homey.app/austriacus/48/75331_2.png)Austriacus: BTW: Can someone explain what is the difference between this two modes? Each mode has certain actions that can be triggered (and some not). The actions that can be activated are shown in the list of settings. [**![Scherm­afbeelding 2024-09-23 om 19.11.42](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/9/7955b193e2515837d3dfac3605f722a43f780839.jpeg)**](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/2/d2792cb1795992fac8d3625b2b787f12f92109a6.jpeg) Main differentiating actions are Double Tap, Slide and pick up and hold. Unfortunately, within Homey it is not possible to dynamically enable or disable trigger flow cards. I will add a additional comment in this differentiating flow cards (scene mode only / action mode only). **Thank you. I set up the cube on the mobile and there actions are dsiplayed limited.** ![](https://sea1.discourse-cdn.com/flex015/user_avatar/community.homey.app/austriacus/48/75331_2.png)Austriacus: I connected it without problems to my Homey Pro 2023 and added a flow to switch off the music in one room. Therfore I used a simple setting with just a number on top of the cube. It didn’t work. In the list of flows description always said “3 on top” whatever number I selected. I’m not sure based on your description which flow card you used. Can you clarify? **German version probably leads to misunderstanding** **this is the Flow to switch music on/off** **Cube: device name** **Büro: room of device Seite 4 oben: means cube face with No 4 on top** **Testing the flow works fine** ![image001](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/4/94cb9663a1f3a0f8e30d3c4bfbbe18ea816956f5.png) **Another test with “turning 90 degrees” works fine** ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [September 23, 2024, 7:28pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6139 "2024-09-23T19:28:27Z")
> [@Austriacus](#): > > I misunderstood the note. I thought by pressing the save button the cube gets waked up. > Anyway, shaking the button didn’t help. Still timeout after 10 seconds (close to Homey) There are 2 options to wake up the Cube after pressing the save (settings) button to have it accept the changed operation mode: 1. Pick-up the Cube and shake it 2. Open the Cube and press the button > [@Austriacus](#): > > I tried more and selected “tap 2 times on top” - again it did not work. (I guess tapping on top means something like a double click with my finger on the cube) > > No. It actually means double tapping with the Cube on a solid surface. As long as setting the operation mode times out, the Cube will not report the Double Tap action (which is only available in the action mode). > [@Austriacus](#): > > German version probably leads to misunderstanding > this is the Flow to switch music on/off > > **Cube: device name** > > > \*\*Büro: room of device > > Seite 4 oben: means cube face with No 4 on top That is indeed a bug, thanks for reporting. Will be fixed on short term. ---
**Author:** ![Austriacus](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/austriacus/32/75331_2.png) [@Austriacus](https://community.homey.app/u/Austriacus)\ **Post date:** [September 23, 2024, 10:59pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6140 "2024-09-23T22:59:03Z")
Waking up by button works. Then double tapping also work. At the end everything seems to work beside the identified bug. ---
**Author:** ![Stig\_Solberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stig_solberg/32/48234_2.png) [@Stig\_Solberg](https://community.homey.app/u/Stig_Solberg)\ **Post date:** [September 24, 2024, 6:32am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6141 "2024-09-24T06:32:40Z")
STILL no update for the Wall Switch H1 single (w/neutral)… Why? ---
**Author:** ![David\_Gustafsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/david_gustafsson/32/68075_2.png) [@David\_Gustafsson](https://community.homey.app/u/David_Gustafsson)\ **Post date:** [September 24, 2024, 4:39am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/6142 "2024-09-24T04:39:28Z")
Added a aqara water leak sensor and got no values. Bought a new one and that one also doesn’t have any values. Neither battery or water alarm. [Previous page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=292) [Next page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=294)