# \[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home **URL:** \ **Category:** Apps\ **Tags:** app, zigbee\ **Created:** [August 22, 2018, 8:18pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156 "2018-08-22T20:18:09Z")\ **Posts on this page:** 20\ **Page:** 218
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [May 17, 2023, 3:58pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4563 "2023-05-17T15:58:46Z")
You’re welcome. Must say that untill now, my new HP23 has proven to be very stable. Never lost a beat. The Aqara’s continue to work just fine… ---
**Author:** ![RemcoV](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/remcov/32/16441_2.png) [@RemcoV](https://community.homey.app/u/RemcoV)\ **Post date:** [May 17, 2023, 6:47pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4564 "2023-05-17T18:47:04Z")
cheered too early. After another boot, the aqara sensors appear with the red triangle. No one worked again. It’s a really big sh\*t situation ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 17, 2023, 7:40pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4565 "2023-05-17T19:40:12Z")
Share the dev view for Zigbee, just the nodes view, also be sure to submit system diag. report to Athom. Also you are on latest RC, correct? Btw also have plenty of Aqara sensors, in total about~70 Zigbee devices and all works fine except of Xiaomi, which I gave up already month ago ---
**Author:** ![RemcoV](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/remcov/32/16441_2.png) [@RemcoV](https://community.homey.app/u/RemcoV)\ **Post date:** [May 17, 2023, 8:22pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4566 "2023-05-17T20:22:22Z")
Xiaom and Aqara are the same, so it seems a bigger issue ☹ as you are facing it as well. I’m waiting on a response from Atom to provide the diagnostics. ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [May 18, 2023, 5:40am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4568 "2023-05-18T05:40:27Z")
> [@RemcoV](#): > > I’m waiting on a response from Atom to provide the diagnostics. “It’s the app’s fault” 😛 ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 18, 2023, 5:53am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4569 "2023-05-18T05:53:38Z")
Aqara works for me flawlessly, Xiaomi not but since 1 months I’m hooked directly on Xiaomi Gateway for those few sensors. Without more information from your side, you indeed need to wait for Athom indeed…one of the reaction might be as Robert suggested (which was kind of joke as it can’t be app fault) ---
**Author:** ![DoctorBazinga](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/doctorbazinga/32/39686_2.png) [@DoctorBazinga](https://community.homey.app/u/DoctorBazinga)\ **Post date:** [May 19, 2023, 9:08pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4570 "2023-05-19T21:08:55Z")
The Aqara FP2 sensor uses Wifi not Zigbee and is Homekit compatible. So I doubt it will be supported by this Aqara Zigbee app. You could install the FP2 through the official Aqara app to Homekit and via Homey’s experimental Homekit support & install maybe to Homey. In future the FP2 and also Homey will support Matter through (firmware) updates of both devices. And I have installed it already to Home Assistant and via Homey’s “Home assistant Community” app to Homey 🕶 > **[Aqara FP2 Presence sensor](https://community.home-assistant.io/t/aqara-fp2-presence-sensor/564481/4)** > > It’s a wi-fi device, no hub needed. Just the Aqara Home app. ---
**Author:** ![Pierre\_van\_Mouche](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pierre_van_mouche/32/48231_2.png) [@Pierre\_van\_Mouche](https://community.homey.app/u/Pierre_van_Mouche)\ **Post date:** [May 25, 2023, 4:12pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4571 "2023-05-25T16:12:37Z")
I have 6 awara humidity devices working fine with my ‘old’ Homey Pro’. I received the new one, and wanted to add them, but I cannot find how. It’s even worse: this morning I found a way to install them and it worked. Now, later today, I wanted to add the other ones, by I cannot remember how I added them. And I tried everything but don’t find a way. Anybody? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [May 25, 2023, 4:56pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4572 "2023-05-25T16:56:26Z")
> [@Pierre\_van\_Mouche](#): > > I have 6 awara humidity devices There is a topic for the Aqara App [[APP] Aqara & Xiaomi Smart Home - A different kind of Smart Home solution (Zigbee App)](https://community.homey.app/t/aqara-xiaomi-smart-home-zigbee-app-v1-6-0-test-v1-7-0/156) Please use the Search and existing Topic if possible ---
**Author:** ![pieter2](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pieter2/32/9977_2.png) [@pieter2](https://community.homey.app/u/pieter2)\ **Post date:** [May 29, 2023, 2:24pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4573 "2023-05-29T14:24:53Z")
I have multiple Xiaomi Wireless Mini Switch, since the upgrade from the “old” Homey to HP23 these are broken. I tried to repair them, remove, re-add, reboot but nothing seems to work. Sometimes I get 1 working, and when I try to repair / re-add another one, the first one is broken and second one works. ID: cdc89d21-eda9-4962-aff3-e00d76d971f1 Is this a known problem? ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [May 29, 2023, 5:34pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4574 "2023-05-29T17:34:38Z")
Unfortunately yes (and officially no), please sent report - complain to Athom via [https://homey.app/en-us/wiki/hp23-early-access/](https://homey.app/en-us/wiki/hp23-early-access/), together with System Diag (app has nothing to do with that). There were some successes by moving the devices closer, repeatedly pressing the button etc. - the key is to have “network address” visible on [Homey Developer Tools](https://tools.developer.homey.app/tools/zigbee) - eg. myself, I have one Xiaomi occupancy sensor working since day 1, rest of the “Xiaomi” devices (buttons, contact sensors) I had to move to my old Xiaomi v2 Gateway ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [June 2, 2023, 6:14pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4575 "2023-06-02T18:14:53Z")
I have a problem with my Wireless Switch (2018). Could be since I updatet my HP23 to rc110, but not sure yet: Flows where a scene (doubleclick) was selected as trigger did not run. When the flow was inspected, the IF card was broken. I tried removing and adding the switch again. In that case I can select an IF card “when a scene was activated”, but I cannot select which scene. Is this a Homey rc110 problem or can something else be wrong? Anyone else experiencing the same problem? ![IMG_0597](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/d/0d1cf50fcbdaa53e42ab560781bb82cf227b9a17.jpeg) ![IMG_0598](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/d/0d6ecdbbac912065c65b76bcd5b75e2f3d9a40eb.jpeg) ---
**Author:** ![Yannick\_Eeckelaert](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/yannick_eeckelaert/32/35262_2.png) [@Yannick\_Eeckelaert](https://community.homey.app/u/Yannick_Eeckelaert)\ **Post date:** [June 3, 2023, 5:32am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4576 "2023-06-03T05:32:57Z")
Hi all, Is there any news on the aqara luminance sensor battery problem? Stil have the problem of the battery’s ho alway go from full tot empty every two hours? I hope that somewone could give some advice for this problem. ---
**Author:** ![sarma](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sarma/32/77894_2.png) [@sarma](https://community.homey.app/u/sarma)\ **Post date:** [June 3, 2023, 8:06pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4577 "2023-06-03T20:06:40Z")
I’m having problems with setting up Aqara H1 wireless double switches to my Homey Bridge. I have 15 switches and none of them connected from the first try. After I tried to add them I get message that it was not successful and try again. I was very stubborn and after hours of restarting Homey, pulling out batteries from switches, doing the whole process over and over again … I managed to connect 4 switches and they seem to work okay. Anyone else experienced similar issues? Could it be because Homey Bridge is not the first class citizen device? Is there any way to debug this Aqara app and drivers? It looks like that I could find out was the problem by debugging the app. ---
**Author:** ![tanwk3](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tanwk3/32/1378_2.png) [@tanwk3](https://community.homey.app/u/tanwk3)\ **Post date:** [June 7, 2023, 11:39pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4579 "2023-06-07T23:39:27Z")
My bad i saw H1 rocker supported and didnt notice triple rocker wasnt listed and implemented it. Adding as a zigbee device only allow the first gang function and lose out 2nd and 3rd gang. Any roadmap for aqara H1 triple rocker? ---
**Author:** ![Shiki](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Shiki](https://community.homey.app/u/Shiki)\ **Post date:** [June 8, 2023, 4:16am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4580 "2023-06-08T04:16:23Z")
@TedTolboom I’ve this Aqara B1 Curtain, is it possible to add a ‘Timeline’ tab (feature request) to the apps. ![Screenshot 2023-06-08 at 12.12.16 PM](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/1/a1f74da24a42c92dfa2f821db4df78466a400b8e.png) ---
**Author:** ![Ulf\_Lindehoff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ulf_lindehoff/32/67689_2.png) [@Ulf\_Lindehoff](https://community.homey.app/u/Ulf_Lindehoff)\ **Post date:** [June 9, 2023, 10:03am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4582 "2023-06-09T10:03:06Z")
@TedTolboom Please add Aqara Mini Switch WXKG20LM ```auto "ids": { "modelId": "lumi.remote.acn007", "manufacturerName": "" }, "endpoints": { "ieeeAddress": "54:ef:44:10:00:6b:3d:bf", "networkAddress": 24802, "modelId": "lumi.remote.acn007", "manufacturerName": "LUMI", "capabilities": { "type": "Buffer", "data": [ 128 ] }, "endpointDescriptors": [ { "status": "SUCCESS", "nwkAddrOfInterest": 24802, "_reserved": 24, "endpointId": 1, "applicationProfileId": 260, "applicationDeviceId": 0, "applicationDeviceVersion": 0, "_reserved1": 2, "inputClusters": [ 0, 1, 3, 18, 64704 ], "outputClusters": [ 3, 6, 25 ] } ], "touchlinkGroupIds": [], "extendedEndpointDescriptors": { "1": { "clusters": { "basic": { "attributes": [ { "acl": [ "readable" ], "id": 0, "name": "zclVersion", "value": 3 }, { "acl": [ "readable" ], "id": 1, "name": "appVersion", "value": 7 }, { "acl": [ "readable" ], "id": 2, "name": "stackVersion", "value": 2 }, { "acl": [ "readable" ], "id": 3, "name": "hwVersion", "value": 0 }, { "acl": [ "readable" ], "id": 4, "name": "manufacturerName", "value": "LUMI" }, { "acl": [ "readable" ], "id": 5, "name": "modelId", "value": "lumi.remote.acn007" }, { "acl": [ "readable" ], "id": 7, "name": "powerSource", "value": "battery" }, { "acl": [ "readable" ], "id": 13 }, { "acl": [ "readable", "writable" ], "id": 18, "name": "deviceEnabled", "value": true }, { "acl": [ "readable" ], "id": 65533, "name": "clusterRevision", "value": 1 } ] }, "powerConfiguration": { "attributes": [ { "acl": [ "readable" ], "id": 32, "name": "batteryVoltage", "value": 29 }, { "acl": [ "readable" ], "id": 65533, "name": "clusterRevision", "value": 1 } ] }, "identify": { "attributes": [ { "acl": [ "readable", "writable" ], "id": 0, "name": "identifyTime", "value": 0 }, { "acl": [ "readable" ], "id": 65533, "name": "clusterRevision", "value": 1 } ] }, "multistateInput": { "attributes": [ { "acl": [ "reportable" ], "id": 85, "name": "presentValue", "reportingConfiguration": { "status": "NOT_FOUND", "direction": "reported" } }, { "acl": [ "readable" ], "id": 65533, "name": "clusterRevision", "value": 1 } ] } }, "bindings": { "identify": { "attributes": [ { "acl": [ "readable", "writable" ], "id": 0, "name": "identifyTime", "value": 0 }, { "acl": [ "readable" ], "id": 65533, "name": "clusterRevision", "value": 1 } ] }, "onOff": { "attributes": "UNSUP_GENERAL_COMMAND", "commandsGenerated": "UNSUP_GENERAL_COMMAND", "commandsReceived": "UNSUP_GENERAL_COMMAND" }, "ota": {} } } } } ``` ---
**Author:** ![PaulDc](https://avatars.discourse-cdn.com/v4/letter/p/c57346/32.png) [@PaulDc](https://community.homey.app/u/PaulDc)\ **Post date:** [June 10, 2023, 9:24pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4584 "2023-06-10T21:24:04Z")
I second that I brought one that is now just collecting dust. ---
**Author:** ![Frank](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frank/32/60402_2.png) [@Frank](https://community.homey.app/u/Frank)\ **Post date:** [June 10, 2023, 11:02pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4585 "2023-06-10T23:02:37Z")
As mentioned by others earlier: I have two Aqara Curtain Drivers E1. When I control them, i.e. open them (value:1.00), the position value gets overwritten by 0.02 (2%) after a number of seconds - rendering the tag useless for use in flows. Any ideas what might be done to fix this? ---
**Author:** ![Veerboot007](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/veerboot007/32/78113_2.png) [@Veerboot007](https://community.homey.app/u/Veerboot007)\ **Post date:** [June 13, 2023, 9:19pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/4586 "2023-06-13T21:19:39Z")
Hello, when will the new door/window P1 sensor be available? Type MCCGQ13LM? Thanks in advance [Previous page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=217) [Next page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=219)