# \[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home **URL:** \ **Category:** Apps\ **Tags:** app, zigbee\ **Created:** [August 22, 2018, 8:18pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156 "2018-08-22T20:18:09Z")\ **Posts on this page:** 20\ **Page:** 173
**Author:** ![Joep\_Vullings](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joep_vullings/32/9293_2.png) [@Joep\_Vullings](https://community.homey.app/u/Joep_Vullings)\ **Post date:** [December 11, 2021, 10:20pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3640 "2021-12-11T22:20:00Z")
Yes I saw that, but the only option to choose from was ‘1x gedrukt’/pressed once… ---
**Author:** ![Otter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/otter/32/11467_2.png) [@Otter](https://community.homey.app/u/Otter)\ **Post date:** [December 11, 2021, 10:27pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3641 "2021-12-11T22:27:56Z")
Allright, I have bought and installed a E1 hub and aqara ledbulb just for the sake of testing the motion sensor, is it really that good? I have set it up in my toilet because thats the place this would really be handy i.m.o. I set it at the highest sensitivity and shortest reset time and it just works like a charm. It keeps picking up every little movement and resetting the timer of 1 minute accordingly. When I enter the room it picks up really quick without hesitation and the aqara bulb responds seemless. I would really love to connect it to Homey so it controls more than just aqara stuff. I will take a look if I will take a swing at deCONZ or zigbee2mqtt. But I’d rather control it via the Homey directly ofcourse! ---
**Author:** ![Otter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/otter/32/11467_2.png) [@Otter](https://community.homey.app/u/Otter)\ **Post date:** [December 11, 2021, 10:38pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3642 "2021-12-11T22:38:24Z")
On my wireless switch double (2018) there is 1x and 2x thats it ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [December 12, 2021, 12:47am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3643 "2021-12-12T00:47:20Z")
> [@Joep\_Vullings](#): > > from was ‘1x gedrukt’/pressed once… Use logic card in the AND, there you can choose the Tag you want ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [December 12, 2021, 7:11am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3644 "2021-12-12T07:11:43Z")
> [@Sergey\_Doroshenko](#): > > Let me know if this is not possible or will not be done for other reasons. Why not search for “ZNGZDJ11LM” on the forum yourself? ---
**Author:** ![Meditia](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/meditia/32/34405_2.png) [@Meditia](https://community.homey.app/u/Meditia)\ **Post date:** [December 12, 2021, 12:52pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3645 "2021-12-12T12:52:48Z")
Hi No no still no solution ---
**Author:** ![Jihallberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jihallberg/32/47639_2.png) [@Jihallberg](https://community.homey.app/u/Jihallberg)\ **Post date:** [December 12, 2021, 10:11pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3646 "2021-12-12T22:11:21Z")
Hi. I have a Bridge and been experiencing some issues when trying to add more than six Aqara-devices. I’ve now read on these forums that it seems like more people have the exact same issue with Bridge. It’s fine up to six ZigBee devices then nothing seems to pair anymore. I’ve also tried to add my seventh Aqara device as generic ZigBee but it doesn’t pair anyway. I believe this is a Homey Bridge issue rather than an Aqara issue, would you agree? Anyways thought you guys should know. Contacted Athom support, will report back when I get some feedback. Any ideas from this forum is appreciated. Regards ---
**Author:** ![Michele.Brustenghi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/michele.brustenghi/32/47475_2.png) [@Michele.Brustenghi](https://community.homey.app/u/Michele.Brustenghi)\ **Post date:** [December 13, 2021, 4:02pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3647 "2021-12-13T16:02:39Z")
If you’ll find one, can you post it? thanks! ---
**Author:** ![Michele.Brustenghi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/michele.brustenghi/32/47475_2.png) [@Michele.Brustenghi](https://community.homey.app/u/Michele.Brustenghi)\ **Post date:** [December 13, 2021, 4:05pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3648 "2021-12-13T16:05:25Z")
> [@Jihallberg](#): > > I believe this is a Homey Bridge issue rather than an Aqara issue, would you agree? I think so too. > [@Jihallberg](#): > > Contacted Athom support, will report back when I get some feedback. thank you ---
**Author:** ![okidoki](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/okidoki/32/12735_2.png) [@okidoki](https://community.homey.app/u/okidoki)\ **Post date:** [December 13, 2021, 10:21pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3649 "2021-12-13T22:21:00Z")
Just wanted to add that I have the exact same problem with the Bridge. After adding 6 Aqara devices I can’t add any more.Pairing just times out. I own a Pro as well and have no problems with this there. Thinking of returning the Bridge, and just get another Pro instead. ---
**Author:** ![Jihallberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jihallberg/32/47639_2.png) [@Jihallberg](https://community.homey.app/u/Jihallberg)\ **Post date:** [December 14, 2021, 9:35pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3650 "2021-12-14T21:35:13Z")
Okey so Athom Support got back to me today and told me it seems like my Zigbee chip is overloaded since I don’t have any additional “Zigbee routers” in my network. I tried to add Ikea Control Outlet today (I believe it acts as a repeater?) but since I can’t pair anything new to my Bridge that was a waste of time. Another interesting thing is that if I remove a couple of Aqaras I still can’t add any “new” devices, like Aqara Motion Sensor. I can however re-add the devices I just deleted perfectly fine. This smells like a software/driver issue to me but who knows. Sure - it’s in Beta so I’ll try not to be too judgmental… 🙂 Looking forward to their reply. I may try a factory reset tomorrow if I get some time over. Will keep you posted. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [December 14, 2021, 9:49pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3651 "2021-12-14T21:49:13Z")
Try restarting the Bridge after you have removed a device and then try to add the repeater. ---
**Author:** ![FredrikKarlsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fredrikkarlsson/32/48140_2.png) [@FredrikKarlsson](https://community.homey.app/u/FredrikKarlsson)\ **Post date:** [December 14, 2021, 10:00pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3652 "2021-12-14T22:00:42Z")
Has there been any response to this request? I am also looking forward to addition of E1 roller shade driver @TedTolboom: Any plans of including this device?🕶 /Fredrik ---
**Author:** ![Jihallberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jihallberg/32/47639_2.png) [@Jihallberg](https://community.homey.app/u/Jihallberg)\ **Post date:** [December 14, 2021, 10:12pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3653 "2021-12-14T22:12:44Z")
- Removed temp-sensor - Unplugged Bridge for 10 mins - Started Bridge and tried to add repeater - Not pairing - Tried to add old temp-senor again - Paired instantly ---
**Author:** ![Top\_Homey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/top_homey/32/13177_2.png) [@Top\_Homey](https://community.homey.app/u/Top_Homey)\ **Post date:** [December 15, 2021, 11:28am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3654 "2021-12-15T11:28:30Z")
I have the same problem.I will explain how I connect the Aqara H1 EU (single rocker) with neutral. I actually use the Aqara H1 as a zigbee router only the phase and neutral connected. so the lamp (PH HUE) is always live. When I press the buttons, sometimes the lamp turns on, often I have to press several times. But the strange thing is that the lamp just goes off after a random time. See my flows, I’ve added notification so you can see what’s happening. but on the notification attachment. I never pressed theswitch H1 to go off. I think the off signal comes from the switch H1 at an x ​​time. hope there will be a solution. ![lamp aan](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/d/4d3c8709db7773f87e85f50b26585872c6176670.jpeg) ![lamp uit](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/b/eb9c8000269137d868368eb8be068095ba44eef5.jpeg) ![IMG_7876](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/d/7dd4471ae71e915fd1d377feb102ba9f28851bf6.jpeg) ---
**Author:** ![Sergey\_Doroshenko](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sergey_doroshenko/32/13724_2.png) [@Sergey\_Doroshenko](https://community.homey.app/u/Sergey_Doroshenko)\ **Post date:** [December 18, 2021, 5:45am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3655 "2021-12-18T05:45:33Z")
I am grateful for your attention. I have not found the answer to my question. TedTolboom has been collecting contributions to add Aqara Rolling Shutter motor ZNGZDJ11LM two years ago. I think that these information isn’t no longer relevant. ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [December 18, 2021, 9:02am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3656 "2021-12-18T09:02:04Z")
> [@Sergey\_Doroshenko](#): > > TedTolboom has been collecting contributions to add Aqara Rolling Shutter motor ZNGZDJ11LM two years ago That in itself might be an answer to your question. ---
**Author:** ![9ixxerlee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/9ixxerlee/32/34726_2.png) [@9ixxerlee](https://community.homey.app/u/9ixxerlee)\ **Post date:** [December 19, 2021, 8:26am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3657 "2021-12-19T08:26:52Z")
Hi there, Recently I purchased some Aqara Xiaomi Window and door sensor E1, but can be detected by homey only as a Zigbee general device. Can this model be added to the app? ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [December 19, 2021, 8:29am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3658 "2021-12-19T08:29:54Z")
Please search through this thread for posts about this device. ---
**Author:** ![Joep\_Vullings](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joep_vullings/32/9293_2.png) [@Joep\_Vullings](https://community.homey.app/u/Joep_Vullings)\ **Post date:** [December 20, 2021, 1:58pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3659 "2021-12-20T13:58:07Z")
No, the only tag there is ‘battery warning on’… (In the AND) In the IF there is only ‘1x gedrukt’. Does that make sense? [Previous page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=172) [Next page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=174)