# \[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home

**URL:** <https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156>\
**Category:** Apps\
**Tags:** app, zigbee\
**Created:** [August 22, 2018, 8:18pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156 "2018-08-22T20:18:09Z")\
**Posts on this page:** 20\
**Page:** 167

<div class="post-metadata">

**Author:** ![ArnoMeijer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arnomeijer/32/46931_2.png) [@ArnoMeijer](https://community.homey.app/u/ArnoMeijer)\
**Post date:** [November 15, 2021, 2:54pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3520 "2021-11-15T14:54:19Z")

</div>

> [@TedTolboom](#):
>
> This is a known issue. A new series of devices that is not formally launched outside of China.  
> I am in discussion with Aqara to get access to these devices.

Hi Ted,  
I have the same issue and four pieces of this switch sitting unused here. I asked AlieXpr. if I could return them (postage too expensive) and they told me that the previous version has discontinued. So more and more people will have this problem soon.

Thanks for four effort!

Regards,  
Arno

---

<div class="post-metadata">

**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\
**Post date:** [November 15, 2021, 3:27pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3521 "2021-11-15T15:27:39Z")

</div>

> [@Zentier](#):
>
> I got the same issue as well but for mccgq11lm. Device not detected after long hold. Any resolution? Thank you.

Is there a specific error message shown in the Homey app?

> [@rindler](#):
>
> If you ever add those E1 devices at least with zigbee2mqtt they were not possible to pair at first since the device expect the Aqara manufacturer name to be confirmed with the controller, see [Help request for new device Xiaomi Aqara E1 door & window contact sensor · Issue #9274 · Koenkk/zigbee2mqtt · GitHub](https://github.com/Koenkk/zigbee2mqtt/issues/9274#issuecomment-955803433). Don’t know how Homey handles this but just a tip for your knowledge.

Thanks for providing the feedback.  
I am not surprised about this issue, which could be the reason why Aqara did not yet release this version of the sensors to Global or EU markets. Unfortunately I don’t have this sensor myself to check compatibility with Homey myself. If anyone has one of these sensors and is willing to send it to me, I would appreciate this.

> [@ArnoMeijer](#):
>
> I have the same issue and four pieces of this switch sitting unused here. I asked AlieXpr. if I could return them (postage too expensive) and they told me that the previous version has discontinued. So more and more people will have this problem soon.

See also my feedback to rindler’s question. For the Chinese market the sensor might be discontinued (large market share of the Aqara hub), but not for the Global or EU market (larger market share for other controllers).

---

<div class="post-metadata">

**Author:** ![Zentier](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zentier/32/47273_2.png) [@Zentier](https://community.homey.app/u/Zentier)\
**Post date:** [November 15, 2021, 3:48pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3522 "2021-11-15T15:48:52Z")

</div>

Hi, there is no error message shown. It just couldnt locate the sensors ( bought 3, all 3 couldnt be detected).

I am currently using 2 other same sensors and is able to detect them last time and is working fine

---

<div class="post-metadata">

**Author:** ![Stikstof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stikstof/32/76870_2.png) [@Stikstof](https://community.homey.app/u/Stikstof)\
**Post date:** [November 16, 2021, 11:47am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3523 "2021-11-16T11:47:48Z")

</div>

Can anyone clarify what scenes are possible with the wall switches? I’ve read something about ‘pressed X times’, and ‘long press’ and ‘long press release’?

If I keep the button pressed, will multiple ‘long press’ events be sent to the Homey (if yes: at what interval?), or just once? I’d like to create dimming functionality by pressing and holding the button.

---

<div class="post-metadata">

**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\
**Post date:** [November 16, 2021, 12:46pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3524 "2021-11-16T12:46:50Z")

</div>

> [@TedTolboom](#):
>
> If anyone has one of these Aqara E1 door / window sensors and is willing to send it to me, I would appreciate this.

This would be the fastest option to check / determine if there is a chance to get the Aqara E1 sensors working. Please send me a DM.

> [@Stikstof](#):
>
> Can anyone clarify what scenes are possible with the wall switches? I’ve read something about ‘pressed X times’, and ‘long press’ and ‘long press release’?

That depends entirely on the model of wireless wall switch you are referring to.

> [@Stikstof](#):
>
> If I keep the button pressed, will multiple ‘long press’ events be sent to the Homey (if yes: at what interval?), or just once? I’d like to create dimming functionality by pressing and holding the button.

No, the long press / aka key held command is send only once.  
Some (not all) wireless switches also send a key released command. But only if the device is providing either a command or some other trigger to support this.

---

<div class="post-metadata">

**Author:** ![DanielLazzaro](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daniellazzaro/32/33853_2.png) [@DanielLazzaro](https://community.homey.app/u/DanielLazzaro)\
**Post date:** [November 16, 2021, 7:10pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3525 "2021-11-16T19:10:55Z")

</div>

I dont know if it brings you forward, but I have made an Interview with the Window and Doorsensor E1.

```auto
  "ids": {
    "modelId": "lumi.magnet.acn001",
    "manufacturerName": "LUMI"
  },
  "endpoints": {
    "endpointDescriptors": [
      {
        "endpointId": 1,
        "applicationProfileId": 260,
        "applicationDeviceId": 1026,
        "applicationDeviceVersion": 0,
        "_reserved1": 2,
        "inputClusters": [
          0,
          1,
          3,
          1280,
          64704
        ],
        "outputClusters": [
          3,
          25
        ]
      }
    ],
    "endpoints": {
      "1": {
        "clusters": {
          "basic": {
            "attributes": [
              {
                "acl": [
                  "readable"
                ],
                "id": 0,
                "name": "zclVersion",
                "value": 3
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 1,
                "name": "appVersion",
                "value": 4
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 2,
                "name": "stackVersion",
                "value": 2
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 3,
                "name": "hwVersion",
                "value": 0
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 4,
                "name": "manufacturerName",
                "value": "LUMI"
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 5,
                "name": "modelId",
                "value": "lumi.magnet.acn001"
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 7,
                "name": "powerSource",
                "value": "battery"
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 13
              },
              {
                "acl": [
                  "readable",
                  "writable"
                ],
                "id": 18,
                "name": "deviceEnabled",
                "value": null
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 65533,
                "name": "clusterRevision",
                "value": 1
              }
            ]
          },
          "powerConfiguration": {
            "attributes": [
              {
                "acl": [
                  "readable"
                ],
                "id": 32,
                "name": "batteryVoltage",
                "value": 27
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 65533,
                "name": "clusterRevision",
                "value": 1
              }
            ]
          },
          "identify": {
            "attributes": [
              {
                "acl": [
                  "readable",
                  "writable"
                ],
                "id": 0
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 65533,
                "name": "clusterRevision",
                "value": 1
              }
            ]
          },
          "iasZone": {
            "attributes": [
              {
                "acl": [
                  "readable"
                ],
                "id": 0,
                "name": "zoneState",
                "value": "notEnrolled"
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 1,
                "name": "zoneType"
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 2,
                "name": "zoneStatus",
                "value": {
                  "type": "Buffer",
                  "data": [
                    1,
                    1
                  ]
                }
              },
              {
                "acl": [
                  "readable",
                  "writable"
                ],
                "id": 16,
                "name": "iasCIEAddress",
                "value": "00:00:00:00:00:00:00:00"
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 17,
                "name": "zoneId",
                "value": 0
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 65533,
                "name": "clusterRevision",
                "value": 1
              }
            ]
          }
        },
        "bindings": {
          "identify": {
            "attributes": [
              {
                "acl": [
                  "readable",
                  "writable"
                ],
                "id": 0
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 65533,
                "name": "clusterRevision",
                "value": 1
              }
            ]
          },
          "ota": {
            "attributes": [
              {
                "acl": [
                  "readable"
                ],
                "id": 0
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 1
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 2
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 3
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 4
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 5
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 6
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 7
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 8
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 9
              },
              {
                "acl": [
                  "readable"
                ],
                "id": 65533,
                "name": "clusterRevision",
                "value": 1
              }
            ]
          }
        }
      }
    }
  }

```

---

<div class="post-metadata">

**Author:** ![Oggy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oggy/32/47412_2.png) [@Oggy](https://community.homey.app/u/Oggy)\
**Post date:** [November 17, 2021, 5:37pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3526 "2021-11-17T17:37:27Z")

</div>

Hello!

Since the last update my wallswitch stopped working, it worked perfect before.  
Model: WS-EUK01. (Aqara H1 EU No neutral, single rocker)

I’ve tried reconnecting it without success.  
It can respond once every now and then, but stop working again after.

I’m kinda new to the homey, so maybe i’m doing something wrong, but it worked until the update.  
Anyone else with the same problem?

And is there any way to install an older update for the app?

Best regards  
Oggy

---

<div class="post-metadata">

**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\
**Post date:** [November 17, 2021, 5:44pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3527 "2021-11-17T17:44:56Z")

</div>

> [@Oggy](#):
>
> Since the last update my wallswitch stopped working, it worked perfect before.  
> Model: WS-EUK01. (Aqara H1 EU No neutral, single rocker)

Can you send me a apps diagnostics report?  
Homey app \> settings \> apps \> Aqara app \> send diagnostics report  
With your forum name as comment; I will have a look into it.

---

<div class="post-metadata">

**Author:** ![Oggy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oggy/32/47412_2.png) [@Oggy](https://community.homey.app/u/Oggy)\
**Post date:** [November 17, 2021, 6:03pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3528 "2021-11-17T18:03:58Z")

</div>

Done! Don’t know if you need the ID that the app gave me. But i’ll put it here.

```auto
65e15b78-c29b-4d42-b99f-7e52533397a0

```

---

<div class="post-metadata">

**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\
**Post date:** [November 17, 2021, 7:31pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3529 "2021-11-17T19:31:13Z")

</div>

> [@Oggy](#):
>
> Done! Don’t know if you need the ID that the app gave me. But i’ll put it here.
> 
> ```auto
> 65e15b78-c29b-4d42-b99f-7e52533397a0
> 
> ```

Not needed, as long as you add something meaningfull to the comment (like your forum name).

> [@Oggy](#):
>
> Since the last update my wallswitch stopped working, it worked perfect before.  
> Model: WS-EUK01. (Aqara H1 EU No neutral, single rocker)
> 
> I’ve tried reconnecting it without success.  
> It can respond once every now and then, but stop working again after.

I think I found the issue and have fixed it in v1.4.1.  
Could you try this [update](https://homey.app/a/com.xiaomi-mi/test/) and confirm that it keeps working?

---

<div class="post-metadata">

**Author:** ![Paul\_Sc](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul_sc/32/16562_2.png) [@Paul\_Sc](https://community.homey.app/u/Paul_Sc)\
**Post date:** [November 17, 2021, 7:32pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3530 "2021-11-17T19:32:20Z")

</div>

Hello

Is there a way to get an alert if a sensor does not update regularly ?  
example : One of my sensor (Aqara basic temperature & humidity sensor) did not send any update during 14 days.

=\> all my flows were wrong, my heating schedule also, but i did not see it …

thanks

---

<div class="post-metadata">

**Author:** ![Oggy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oggy/32/47412_2.png) [@Oggy](https://community.homey.app/u/Oggy)\
**Post date:** [November 17, 2021, 7:49pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3531 "2021-11-17T19:49:56Z")

</div>

Seems to be working! Thank you so much. I’ll let you know if any other problem turn up!

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [November 17, 2021, 9:40pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3532 "2021-11-17T21:40:57Z")

</div>

Trigger card translated: “A device did not report for 24h.”

---

<div class="post-metadata">

**Author:** ![Paul\_Sc](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul_sc/32/16562_2.png) [@Paul\_Sc](https://community.homey.app/u/Paul_Sc)\
**Post date:** [November 18, 2021, 7:12am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3533 "2021-11-18T07:12:25Z")

</div>

ok, i have found the card thanks.

In the card are you able to precise wich sensor ? (in my mobile app & in the webapp it seems possible, I’m able to select duration, 1 hour… 1 day; but no way to click, select a value for the tags (capter name & zone) … a bug ?

Have a good day.

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [November 18, 2021, 7:27am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3534 "2021-11-18T07:27:04Z")

</div>

By using logics cards as condition, you can specify which zones / sensors  
F.i. a flow like:  
If…  
a sensor did not report  
And…  
select logics card “contains”, and hit the tag icon

> ![Screenshot_20211118-081944_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/d/6d4f519417747922d230850a2e935dd3088f1cc0.jpeg)

Then, under “Local Tags”, you’ll find 2 variables you can use: [Name] and [Zone]

> ![Screenshot_20211118-081841_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/8/e837c923714ebf627bb57c57e63ecf793fd8adc6.jpeg)

-Pick [Name] and enter ‘Kitchen Door’, to pinpoint to only that sensor;  
-Pick [Zone] and enter ‘Kitchen’, to monitor all sensors in a Zone called Kitchen

> ![Screenshot_20211118-082631_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/8/f8ba92cb242da114f5338acbb4842ea8b64db1c5.jpeg)

The same way you can exclude a zone f.i., by reversing the logics card, so it says “Doesn’t contain”

> ![Screenshot_20211118-083203_Homey](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/d/6d4069b118dae6e639861853a3ec51630c193b13.jpeg)

---

<div class="post-metadata">

**Author:** ![Paul\_Sc](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul_sc/32/16562_2.png) [@Paul\_Sc](https://community.homey.app/u/Paul_Sc)\
**Post date:** [November 18, 2021, 4:28pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3535 "2021-11-18T16:28:40Z")

</div>

ok thanks !

Perfectly clear ;-))

---

<div class="post-metadata">

**Author:** ![Felho](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/felho/32/38916_2.png) [@Felho](https://community.homey.app/u/Felho)\
**Post date:** [November 18, 2021, 5:52pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3536 "2021-11-18T17:52:11Z")

</div>

Hi @TedTolboom I delete and readd H1 No netural switch but same look like enddevice and not a router. 1 picture is before I delete last one Terasz wall switch and after 2. picture add and nothing change router. App is last 1.4.1

 ![Képernyőfotó 2021-11-18 - 18.44.04](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/7/d7477248fe54717f260641c4a7b48d8a29108e65.png)

 ![Képernyőfotó 2021-11-18 - 18.47.26](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/3/a3a4811b61b3fcf2a2a26e85bbc31879e813fab5.png)

---

<div class="post-metadata">

**Author:** ![Paul\_Sc](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul_sc/32/16562_2.png) [@Paul\_Sc](https://community.homey.app/u/Paul_Sc)\
**Post date:** [November 18, 2021, 6:18pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3537 "2021-11-18T18:18:22Z")

</div>

Hello

One of my Aqara temperature & humidity sensor stopped working. Probably for a battery problem.  
But i was not able to get it working again =\> I deleted it.  
Now i’m not able to configure it anymore, i get the message “This device is already present. It’s possible that you need to remove it from homey & add it again” (translated from french).  
I have tried already

- New battery
- Restart app, update it. (=\> 1.4.1)
- Stop homey, remove power during 10 mn + remove battery from aqara device the same period
- go in developer app, check zigbee devices =\> nothing for this device
- try to reinstall it in the position it was working last ime
- try to reinstall near to Homey

Any idea on how to get it working again ?  
Thanks.

---

<div class="post-metadata">

**Author:** ![Lichtenberg](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lichtenberg/32/36370_2.png) [@Lichtenberg](https://community.homey.app/u/Lichtenberg)\
**Post date:** [November 18, 2021, 8:06pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3538 "2021-11-18T20:06:10Z")

</div>

> [@How to delete a not existing Zigbee device](https://community.homey.app/t/how-to-delete-a-not-existing-zigbee-device/8874):
>
> How to delete a zigbee device that doesn’t exits any more on the network. When I try to delete it, the systems ask to set it into learn modus. Thats not possible any more.

---

<div class="post-metadata">

**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\
**Post date:** [November 18, 2021, 8:08pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3539 "2021-11-18T20:08:53Z")

</div>

> [@Felho](#):
>
> Hi @TedTolboom I delete and readd H1 No netural switch but same look like enddevice and not a router. 1 picture is before I delete last one Terasz wall switch and after 2. picture add and nothing change router. App is last 1.4.1

I can’t change how the behavior of the device is in the Zigbee network.  
The device ('s firmware) is reporting that it is a battery powered (end)device. What I did in the v1.4.1 update of the app is to have Homey prevent that it is going to wait for the device to wake up before sending the on or off command (and ignore that it doesn’t get a acknowledgement from the device).  
So with the device’s limitation (only on the H1 switch without neutral), you should be able to fully operate the device without any issue.

[Previous page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=166)

[Next page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=168)