# \[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home **URL:** \ **Category:** Apps\ **Tags:** app, zigbee\ **Created:** [August 22, 2018, 8:18pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156 "2018-08-22T20:18:09Z")\ **Posts on this page:** 20\ **Page:** 148
**Author:** ![apps](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/apps/32/30000_2.png) [@apps](https://community.homey.app/u/apps)\ **Post date:** [April 13, 2021, 7:45am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3129 "2021-04-13T07:45:46Z")
Do you want to do it yourself? For lighting" > **[Aqara умный настенный выключатель D1 Zigbee Беспроводной пульт дистанционного...](https://aliexpress.ru/item/32974697281.html?spm=a2g0s.9042311.0.0.264d33edktIdFz&sku_id=66716578789)** > > Aqara умный настенный выключатель D1 Zigbee Беспроводной пульт дистанционного управления переключатель света нейтральный пожарный провод Тройная кнопка для умного дома Mijia. ➜ 2603 заказов. ✓ Хорошие отзывы покупателей. ⭐ Рейтинг - 4.9 ⚡ Мы... For sonos\*\*\* > **[Беспроводной датчик движения Aqara | AliExpress](https://aliexpress.ru/item/32977819179.html?spm=a2g0s.9042311.0.0.264d33edktIdFz)** > > Беспроводной датчик движения Aqara. ➜ 1213 заказов. ✓ Хорошие отзывы покупателей. ⭐ Рейтинг - 5.0 ⚡ Мы ускорили доставку! 【Скидки, купоны, промокоды】. Покупайте ИК-датчик движения по выгодной цене на сайте и в приложении AliExpress. or [https://aliexpress.ru/item/4000310767697.html?spm=a2g0s.9042311.0.0.264d33edK4kvym](https://aliexpress.ru/item/4000310767697.html?spm=a2g0s.9042311.0.0.264d33edK4kvym) or [https://aliexpress.ru/item/32961297103.html?spm=a2g0s.9042311.0.0.264d33edS1UCG0](https://aliexpress.ru/item/32961297103.html?spm=a2g0s.9042311.0.0.264d33edS1UCG0) > [@milkplus](#): > > is there any easy way to check this? Disassemble and look 🙂 ---
**Author:** ![Eternity](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eternity/32/102113_2.png) [@Eternity](https://community.homey.app/u/Eternity)\ **Post date:** [April 13, 2021, 7:45am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3130 "2021-04-13T07:45:51Z")
> [@BHaansbergen](#): > > Hi all, I have an Aqara curtain controller. Only issue is that the open and close is inverted. Is there any way to change this setting in the app? Not possible at the moment and I too have that issue. @TedTolboom has confirmed it’s a feature request. ---
**Author:** ![kalpik](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kalpik/32/28878_2.png) [@kalpik](https://community.homey.app/u/kalpik)\ **Post date:** [April 13, 2021, 7:53am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3131 "2021-04-13T07:53:30Z")
You won’t be able to fit the aqara switch in that 3 switch plates. Aqara switches are meant to be installed individually. ---
**Author:** ![apps](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/apps/32/30000_2.png) [@apps](https://community.homey.app/u/apps)\ **Post date:** [April 13, 2021, 8:07am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3132 "2021-04-13T08:07:56Z")
If the hole is square (no problem), the thermostat will need a new frame. Instead of two switch, make one double switch In the remaining space wireless switch > [@milkplus](#): > > i’m in Norway and suspect that probably most things have a neutral wire as they’re fond of safety here… Do I remember correctly, according to Norwegian standards, everything must be grounded with a wire connection? ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 13, 2021, 10:07am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3133 "2021-04-13T10:07:15Z")
I have three Aqare T&H sensors. Sometimes they get stuck on a specific value, like one now (T/H stuck on same value for 6 hours now). I tried restarting the sensors by removing the battery, but it doesn’t help. Also, when I remove the battery, there is no notification whatsoever of the sensor being offline. Restarting the app also doesn’t help. How do I fix this? ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [April 13, 2021, 10:20am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3134 "2021-04-13T10:20:18Z")
First of all: Homey doesn’t know if sensors are offline or not, because it doesn’t maintain a permanent connection with them. The only thing you can look for is if a device hasn’t reported for X amount of time. Have you run the [Zigbee healthcheck script](https://community.homey.app/t/community-survey-homey-v5-zigbee-health-check-and-statistics-collection-homeyscript/44231) already? ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 13, 2021, 10:41am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3135 "2021-04-13T10:41:32Z")
No. I don’t know anything about zigbee. I only added 9 Aqara sensors (light, water, H/T, motion) to my 20 or so Shelly devices. So, I only have 9 endpoint devices. They are all within 5m of my Homey. Do I need to reset the zigbee network to get my H/T running again? edit: did a zigbee reset and now all my aqara devices are gone… ☹ You want the output? > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[0: logIDInfo]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Homey HostName : homey-5e43bbc15e52de0c3db46c0f > Homey HomeyName : Homey van Stefijn > Wifi : DBlogic 38:0b:3c:e9:d1:31 > ifconfig : 192.168.1.200:80 > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[1: ZigBee controllerState RAW data]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > controllerState =\> {“panId”:33533, > “extendedPanId”:“dd:dd:dd:dd:dd:dd:dd:dd”, > “IEEEAddress”:“00:12:4b:00:1f:1f:9e:1e”, > “networkKey”:“01:03:05:07:09:0b:0d:0f:00:02:04:06:08:0a:0c:0d”, > “networkAddress”:0, > “channel”:11, > “chipVersion”:0, > “transportRev”:2, > “zstackVersion”:“2.6.3”}’ > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[2: logStatInfo]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Platform : linux 4.14.15-g3c513a6eca Node.JS v12.16.1 > Model : Homey (Early 2019) - Model ID homey3s > CPUs #/Model/Speed : 1 x ARMv7 Processor rev 10 (v7l) - 996 Mhz. > Homey Firmware : 5.0.4 > Memory Total : 488 MB - Free : 86192 KB - (17%) > Data and Time : dinsdag 13de april 2021 12:38:39 Zone Europe/Amsterdam [2021-04-13T10:38:39.687Z] > Uptime : 0d + 00:59:48 > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[3: Zigbee Network Data]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > > # Nodes : 9 > > # Routers : 0 > > # EndDevice : 9 > > # manufacturerNames : 2 > > > manufacturerNames : [“LUMI”,“XIAOMI”] > > # modelIds : 4 > > > modelIds : [“lumi.weather”,“lumi.sen\_ill.mgl01”,“lumi.sensor\_motion.aq2”,“lumi.sensor\_wleak.aq1”] > > -=-=-=-=-=-=-=-=-=-=-=-=-=-[3b: routing is an ephemeral state and may change at any time]-=-=-=-=-=-=-=-=-=-=-=-=-=- > > # Bad Routes : 0 > > # Routes 0 hops : 0 > > # Routes 1 hops : 0 > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[5: Devices active Routing]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Please add zigBee Routers to create a mesh network > For more info read > [https://support.athom.com/hc/en-us/articles/360019239879-Advice-on-building-a-stable-Zigbee-network](https://support.athom.com/hc/en-us/articles/360019239879-Advice-on-building-a-stable-Zigbee-network) > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[6: Zigbee Health Advices]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > Well-Known-Key used (CVE-2020-28952) > For more info read > [You Gotta Hack That | Penetration Testing Consultancy](https://yougottahackthat.com/blog/1260/athom-homey-security-static-and-well-known-keys-cve-2020-28952) > Please add more zigBee Routers to create a better mesh network > You only have 0 routers for 9 end-devices > For more info read > [https://support.athom.com/hc/en-us/articles/360019239879-Advice-on-building-a-stable-Zigbee-network](https://support.athom.com/hc/en-us/articles/360019239879-Advice-on-building-a-stable-Zigbee-network) > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-[7: Zigbee Reporting Data]-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > > > reporting : 0,“00124b001f1f9e1e”,3,false,“Homey (Early 2019)”,“5.0.4”,0,11,0,2,“2.6.3”,9,0,9,2,4,0,true,“#”,0,0,0 , $ > > ——————————————————— > ✅ Script Success > ↩ Returned: "Please report above text back on Community [[Community Survey] Homey v5 ZigBee Health check and statistics collection (HomeyScript)](https://community.homey.app/t/44231) ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [April 13, 2021, 10:57am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3136 "2021-04-13T10:57:07Z")
> [@zakraket](#): > > So, I only have 9 endpoint devices. They are all within 5m of my Homey. > Do I need to reset the zigbee network to get my H/T running again? > > edit: did a zigbee reset and now all my aqara devices are gone… Performing a Zigbee reset, well, resets the network. So you need to add all your devices again. Hopefully re-adding your devices will fix your problems. If not, perhaps it’s time to replace their batteries. ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 13, 2021, 10:59am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3137 "2021-04-13T10:59:26Z")
it’s not the batteries, they were all 100% (have all sensors about 2 months now), unless the batteryindicator is not very accurate… But when I think of it, I THINK one of the motionsensors also did not report motion anymore this morning, at least not in Homey. So, what WAS the problem? and how do I fix it next time? Could it be that a powerloss on the Homey causes this? I had to switch off groups on which homey gets it’s power to install some electrical wiring a few times the last days. ---
**Author:** ![Joost\_van\_Kempen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joost_van_kempen/32/10067_2.png) [@Joost\_van\_Kempen](https://community.homey.app/u/Joost_van_Kempen)\ **Post date:** [April 13, 2021, 1:44pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3138 "2021-04-13T13:44:21Z")
Homey and Zigbee is sometimes more magic than science, search this forum for the examples 😉 Devices with software (in general) can be very picky how they’re shut down and/or how they started. When I’m working on my electrical systems I always make sure to shut down everything and start them in a certain order. For example I make sure my modem and router are up and running before starting Homey and my Synology NAS… The other way around is guaranteed trouble… ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 13, 2021, 1:58pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3139 "2021-04-13T13:58:57Z")
I always try to do it the proper way, but I can’t even shutdown Homey, so it’s just power off. And I can’t do anything with the sensors as far as I know (that’s not far) (can’t turn them off) I readded them. I thought I had seen a “rebuild zigbee network” option somewhere, which did not reset the network like I did today. Am I mistaken? ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [April 13, 2021, 2:31pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3140 "2021-04-13T14:31:05Z")
> [@BHaansbergen](#): > > I have an Aqara curtain controller. Only issue is that the open and close is inverted Doesn’t it have a dipswitch of some kind? What does the manual say about reversing? To illustrate : My tuya curtain chain drives have such a (tiny) switch on it, and additionally with a “reverse operation” option in the app config. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [April 13, 2021, 2:36pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3141 "2021-04-13T14:36:26Z")
> [@zakraket](#): > > I thought I had seen a “rebuild zigbee network” option somewhere, which did not reset the network like I did today. Am I mistaken? As far as I know, I don’t know any “rebuild zigbee” button or command. Zigbee builds & rebuilds itself. As you discovered the hard way, a zigbee reset drops all paired devices. ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 15, 2021, 6:29am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3142 "2021-04-15T06:29:45Z")
Again, one of my sensors is stuck (temp/hum/pressure are stuck since last night 19:45). I have removed the battery and put it back (Homey reports it on 100%) but it stays stuck. Also restarted Aqara app. I don’t know if the sensor is not working or it’s the device in the homeyapp that has a problem. What can I do/try? edit: does screen this say anything? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/0/20e084ac70cbed1df639e0a6f8f4204bb0387893.png) edit2: hmm…seems like pressing “interview” got it to unstuck ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [April 15, 2021, 9:17am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3143 "2021-04-15T09:17:58Z")
Unknown manufacturer is not OK… btw even your devices are new, battery might be KO… ![obrazek](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/4/c/4c163c51754c2183da0ac0ae40144b171cb2ebf2.png) I would suggest to take a look - [Updating from 4.2 to 5.0 – Homey Support](https://support.athom.com/hc/en-us/articles/360019238179-Updating-from-4-2-to-5-0) and here - [Fixing disconnected Zigbee devices (without having to modify all flows)](https://community.homey.app/t/fixing-disconnected-zigbee-devices-without-having-to-modify-all-flows/37896) (workaround but it will not fix it permanently) or “Simply” Reset your ZigBee network - it will remove all devices, add them back , fix all the flows… Please note even you have issues with Aqara devices, it’s rather Homey problem ;-( ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 15, 2021, 9:35am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3144 "2021-04-15T09:35:23Z")
tnx I will take a look at your link, but I already reset the zigbee network 2 days ago (see above) and readded all 9 devices (and fixed all flows). So this “network” is 2 day old 🙂 (My home is 5.x btw and I did not have zigbee devices before the update) And I should not trust the battery percentage indicators? They are all 9 at 100%. I could try another battery of course the first time a sensor gets stuck ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [April 15, 2021, 9:53am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3145 "2021-04-15T09:53:39Z")
On your script output I saw you had “well known” network key, that’s why I assumed you haven’t performed reset yet. Anyway, unknown manufacturer is not standard for known devices like Aqara. ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 15, 2021, 10:07am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3146 "2021-04-15T10:07:13Z")
The reset was after the script, so that might explain. The screenshot above is from this morning ---
**Author:** ![E-J](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/e-j/32/9570_2.png) [@E-J](https://community.homey.app/u/E-J)\ **Post date:** [April 15, 2021, 3:38pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3147 "2021-04-15T15:38:19Z")
Do you have any routers in your zigbee mesh? Like light bulbs or plugs. These aqara devices are all end devices and cannot create a healthy mesh network. There is a maximum of end devices that can connect directly to Homey ---
**Author:** ![zakraket](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zakraket/32/17470_2.png) [@zakraket](https://community.homey.app/u/zakraket)\ **Post date:** [April 15, 2021, 6:03pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/3148 "2021-04-15T18:03:38Z")
No, I don’t. Do Aqara wall plugs function as a router/repeater? I believe so since they describe that Aqara sensors communicate directly with the plug? can’t find any explicit specspage that says so [https://www.aqara.com/eu/smart\_outlet.html](https://www.aqara.com/eu/smart_outlet.html) “Even if the network connection is interrupted, the local automation between the smart plug and the sensors still works normally.” [Previous page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=147) [Next page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=149)