# \[APP\] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home **URL:** \ **Category:** Apps\ **Tags:** app, zigbee\ **Created:** [August 22, 2018, 8:18pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156 "2018-08-22T20:18:09Z")\ **Posts on this page:** 20\ **Page:** 131
**Author:** ![MiteZZ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mitezz/32/11373_2.png) [@MiteZZ](https://community.homey.app/u/MiteZZ)\ **Post date:** [January 13, 2021, 9:04am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2763 "2021-01-13T09:04:44Z")
Hi @TedTolboom after the update to 5.0.0-rc.53 the curtain motors are unavailable again. See image below. What do you suggest, remove and add the devices again or wait for an update? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/6/e6d5fd2768ccffbd1b8619f7412e29b8ce7f8e2b.png) thanks! ---
**Author:** ![Sjalabert](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sjalabert/32/11432_2.png) [@Sjalabert](https://community.homey.app/u/Sjalabert)\ **Post date:** [January 13, 2021, 9:12am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2764 "2021-01-13T09:12:03Z")
Did you try a restart of the app? ---
**Author:** ![MiteZZ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mitezz/32/11373_2.png) [@MiteZZ](https://community.homey.app/u/MiteZZ)\ **Post date:** [January 13, 2021, 1:02pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2765 "2021-01-13T13:02:44Z")
Yes, and a PTP too. No result ---
**Author:** ![prosumer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/prosumer/32/166478_2.png) [@prosumer](https://community.homey.app/u/prosumer)\ **Post date:** [January 13, 2021, 7:53pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2766 "2021-01-13T19:53:48Z")
Results on day one are rather disappointing: - got a notification when I left for a walk (opened the front door, no mail delivery) - but no notification when a magazine was delivered I do already have a Hue motion sensor close to the front door; I think it will detect both opening and closing that door. (How) Can I make a flow that only performs actions if there is no motion detected _a few seconds after_ the vibration sensor alarm activated? ---
**Author:** ![Sergey\_Doroshenko](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sergey_doroshenko/32/13724_2.png) [@Sergey\_Doroshenko](https://community.homey.app/u/Sergey_Doroshenko)\ **Post date:** [January 14, 2021, 5:09pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2767 "2021-01-14T17:09:23Z")
Happy Holidays! Do you have any plans to add aqara roller shade earlier this year? ---
**Author:** ![Edwin\_D](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_d/32/136417_2.png) [@Edwin\_D](https://community.homey.app/u/Edwin_D)\ **Post date:** [January 14, 2021, 5:34pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2768 "2021-01-14T17:34:06Z")
Ted is good, but earlier this year? Later you can ask for, but time travel… Man, I didn’t know he was that good. 😉 ---
**Author:** ![Exile82](https://avatars.discourse-cdn.com/v4/letter/e/8491ac/32.png) [@Exile82](https://community.homey.app/u/Exile82)\ **Post date:** [January 14, 2021, 6:46pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2769 "2021-01-14T18:46:53Z")
Hi guys. I purchased the Opple 6-button switch a month ago. Worked quite good at first, but I didn’t use it that much either. Now when I have started to use it more, I am experiencing one issue. It seems to get unresponsive, I am pressing the different buttons but nothing happens, despite I have assigned flows. I have tried to reboot the app, homey and even PTP. After that it works again, but only for some time. I am running RC53 Any ideas? ---
**Author:** ![Edwin\_D](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_d/32/136417_2.png) [@Edwin\_D](https://community.homey.app/u/Edwin_D)\ **Post date:** [January 14, 2021, 7:41pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2770 "2021-01-14T19:41:08Z")
I’m in contact with Athom for similar problems with KAKU remote switches. Barely use my one Zigbee remote. ---
**Author:** ![slim12345](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/slim12345/32/34042_2.png) [@slim12345](https://community.homey.app/u/slim12345)\ **Post date:** [January 15, 2021, 6:22pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2771 "2021-01-15T18:22:41Z")
I am looking to get the Aqara T1 switch (with or without neutral, does not matter) working on the Homey, any suggestions? [Single Switch Module T1 (With Neutral)](https://www.aqara.com/en/single_switch_T1_with-neutral.html) ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [January 15, 2021, 6:30pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2772 "2021-01-15T18:30:29Z")
It may be possible to add it as a Simple Zigbee Device: when adding the device to Homey and you need to choose the app, pick “Homey \> Zigbee”. ---
**Author:** ![Joolee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joolee/32/3064_2.png) [@Joolee](https://community.homey.app/u/Joolee)\ **Post date:** [January 18, 2021, 8:13pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2774 "2021-01-18T20:13:35Z")
I upgraded to Homey V5 and running the app at version 1.2.3. trying to re-pair my QBKG03LM double wall switch. It pairs fine (very close to Homey) but keeps pairing as an ‘Aqara double wall switch (L)’ and i get the message “this type of device might not be supported in the future”. Is the new Homey feature of pairing a double switch as two devices already been implemented in the app? A question in general; does anyone know if this powered device acts as a relay? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [January 18, 2021, 8:37pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2775 "2021-01-18T20:37:29Z")
> [@Joolee](#): > > I upgraded to Homey V5 and running the app at version 1.2.3. trying to re-pair my QBKG03LM double wall switch. It pairs fine (very close to Homey) but keeps pairing as an ‘Aqara double wall switch (L)’ and i get the message “this type of device might not be supported in the future”. Is the new Homey feature of pairing a double switch as two devices already been implemented in the app? Yes, and should end up with “ Aqara Wall Switch Double (L) - Left” and “ Aqara Wall Switch Double (L) - Right” devices within Homey… the old representation has the deprecated flag, so should not be possible to select or found for a match… which inclusion option did you try? Is it possible to retry and send a Homey diagnostics report (not app) so I can check with Athom where this goes wrong? ---
**Author:** ![Joolee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joolee/32/3064_2.png) [@Joolee](https://community.homey.app/u/Joolee)\ **Post date:** [January 19, 2021, 10:05am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2776 "2021-01-19T10:05:07Z")
When I use the general ZigBee method for pairing, Homey tells me it cannot find an app. I have to start the pairing from your app but it doesn’t really seem to matter what switch I select to pair, I tried them all but get the same result. I made a report for Athom with id: D95E9B0E20 For you: 9336b270-b053-42ee-8e58-b52f51aa13da First pairing attempt was using the general ZigBee method, second attempt was using the first double switch in the pairing list and third attempt I tried with the B1 curtain motor but that didn’t seem to work at all 😛 ---
**Author:** ![Sjalabert](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sjalabert/32/11432_2.png) [@Sjalabert](https://community.homey.app/u/Sjalabert)\ **Post date:** [January 19, 2021, 10:34am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2777 "2021-01-19T10:34:17Z")
Did you also try to pair near a router? (powered zigbee device)? ---
**Author:** ![Joolee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joolee/32/3064_2.png) [@Joolee](https://community.homey.app/u/Joolee)\ **Post date:** [January 19, 2021, 10:54am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2778 "2021-01-19T10:54:22Z")
No, I haven’t. No router is currently part of the network so I put Homey right next to the switch (10cm) I’ve got a Tradfri repeater I was planning to pair, could try putting that next to the switch. ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [January 19, 2021, 10:58am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2779 "2021-01-19T10:58:21Z")
The issue doesn’t sound related to the device not being able to join the network (for which you could try using a router), but to recognizing the device properly, which sounds like a software issue to me. ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [January 19, 2021, 11:53am UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2780 "2021-01-19T11:53:14Z")
@Joolee thanks for providing the reports. I think somewhere Homey ignores the deprecated flag in finding the match… Athom Development is looking into it. ---
**Author:** ![Joolee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/joolee/32/3064_2.png) [@Joolee](https://community.homey.app/u/Joolee)\ **Post date:** [January 19, 2021, 12:19pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2781 "2021-01-19T12:19:00Z")
Thanks for the quick reply. It is also weird that the generic ZigBee pairing cannot find a match at all. ---
**Author:** ![Szergely](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/szergely/32/24419_2.png) [@Szergely](https://community.homey.app/u/Szergely)\ **Post date:** [January 19, 2021, 12:55pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2782 "2021-01-19T12:55:48Z")
Hey guys! Today i bought a Xiaomi Door and Window sensor, but i get timeout everytime… I already restart the Homey, and always get timeout. Any idea? ![IMG_2263](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/e/ee103240c26d1d0e37d96e660e0b4f9775d0fbb5.jpeg) ![IMG_2262.PNG](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/9/699bc75103cf03e2ad5a4c10ca6d939d58787392.jpeg) ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [January 19, 2021, 1:00pm UTC](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156/2783 "2021-01-19T13:00:31Z")
You probably mean “At Including” , solution, when the including starts, keep pressing the button every 2 seconds until the including completes. [Previous page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=130) [Next page](https://community.homey.app/t/app-aqara-xiaomi-smart-home-simplify-your-life-with-a-smarter-home/156.md?page=132)