# \[APP\] Aeotec - Intelligent automation - by Aeotec Group **URL:** \ **Category:** Apps\ **Tags:** app, homey-pro, homey-bridge\ **Created:** [May 1, 2022, 1:54pm UTC](https://community.homey.app/t/app-aeotec-intelligent-automation-by-aeotec-group/63220 "2022-05-01T13:54:33Z")\ **Posts on this page:** 1\ **Showing post:** 77
**Author:** ![Killerbert](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/killerbert/32/109031_2.png) [@Killerbert](https://community.homey.app/u/Killerbert)\ **Post date:** [June 26, 2024, 7:55pm UTC](https://community.homey.app/t/app-aeotec-intelligent-automation-by-aeotec-group/63220/77 "2024-06-26T19:55:19Z")
I still have the same issue. Aeotec says I need to changes settings… Is there any way to do this in Homey? I tried to go to the device and select “Advanced Settings” Here I don’t see a match. Below is what I received from Aeotec what should solve the issue… > Parameter 91 - 93 (Threshold values) to 0 or the highest number that they can be. > > Then configure Parameter 101 (automatic sensor reports) to report all sensors. > > Then you can use Parameter 111 (time of sensor reports set in seconds) to determine how often the switch reports. However I did find [Aeotec Home Energy Meter Gen5 - Settings - #7 by Rohman](https://community.homey.app/t/aeotec-home-energy-meter-gen5-settings/61700/7) but… It should be easy and understandable to change a simple setting if that is required… It should work fine after a factory reset… I selected this device because of Homey. It came up in the list of “supported” devices working with “Z-Wave” --- _[View the full topic](https://community.homey.app/t/app-aeotec-intelligent-automation-by-aeotec-group/63220)._