# Any wifi setup tips? (static IPs, repeaters etc.)

**URL:** <https://community.homey.app/t/any-wifi-setup-tips-static-ips-repeaters-etc/118075>\
**Category:** Questions & Help\
**Tags:** homey-pro\
**Created:** [October 13, 2024, 8:37pm UTC](https://community.homey.app/t/any-wifi-setup-tips-static-ips-repeaters-etc/118075 "2024-10-13T20:37:11Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\
**Post date:** [October 13, 2024, 8:50pm UTC](https://community.homey.app/t/any-wifi-setup-tips-static-ips-repeaters-etc/118075/2 "2024-10-13T20:50:01Z")

</div>

> [@Georg](#):
>
> Are dynamic IP addresses (DHCP) for the homey pro and the connected devices ok or would static IPs have advantages?

I would almost always prefer to make a dhcp reservation for devices in your router, to make sure they always get/have the same IP.

> [@Georg](#):
>
> In a mesh network with several repeaters does it matter to which router or repeater the devices are connected?

Do you have a mesh network with several nodes or are you really refering to routers or repeaters? Those are different devices and mesh nodes are (most of the time) superior over repeaters. Especially when the are mutual connected by a lan cable. Then it shouldn’t differ to which node a device is connected.  
Routers are different device types (which could be part of a mesh network), but I don’t think you refer to those.

If you are really using repeaters; then see if you can’t replace them by mesh nodes, preferably connected by an lan cable.

> [@Georg](#):
>
> Any additional tips especially regarding stability, performance and security within the wifi network?

You might want to consider a different wifi network for your smarthome devices. Of course routed to you other network vlans.  
And alway connect by lan cable where possible.  
Make sure your wifi channel(s) are not interfering with tour Zigbee channels, if you are using Zigbee.  
See: [here](https://community.homey.app/t/how-to-plan-and-setup-your-zigbee-network/94770) and [here](https://support.metageek.com/hc/en-us/articles/203845040-ZigBee-and-Wi-Fi-Coexistence).

---

_[View the full topic](https://community.homey.app/t/any-wifi-setup-tips-static-ips-repeaters-etc/118075)._
