# Aerotec multopose sensor

**URL:** <https://community.homey.app/t/aerotec-multopose-sensor/101794>\
**Category:** Apparaten\
**Created:** [January 20, 2024, 7:39pm UTC](https://community.homey.app/t/aerotec-multopose-sensor/101794 "2024-01-20T19:39:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Niek\_Hollander](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niek_hollander/32/81558_2.png) [@Niek\_Hollander](https://community.homey.app/u/Niek_Hollander)\
**Post date:** [January 20, 2024, 7:39pm UTC](https://community.homey.app/t/aerotec-multopose-sensor/101794/1 "2024-01-20T19:39:15Z")

</div>

Hoi,

Ik krijg de aertec multi sensor niet gekoppeld aan mijn HP23. Is er ook een manier om dit met de qr code van de sensor te doen. Via het indrukken van het knopje aan de zijkant lukt het niet.

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [January 21, 2024, 1:42am UTC](https://community.homey.app/t/aerotec-multopose-sensor/101794/2 "2024-01-21T01:42:51Z")

</div>

Aerotec, aertec… bedoel je Aeotec misschien?  
Zo ja, heb je je wel ingelezen hoe zwave werkt?

Belangrijk, het pairen moet een paar centimeter vanaf Homey worden gedaan.

Hier nog even wat info artikelen:

> **[Creating a stable Z-Wave network](https://support.homey.app/hc/en-us/articles/360012182213-Creating-a-stable-Z-Wave-network)**
>
> Z-Wave is a powerful and energy-efficient smart home technology. It can offer a lot to both smart home newbies and pros, most importantly, its excellent range, extended by mesh networking.
> Minimal ...

> **[Using Z-Wave devices with Homey](https://support.homey.app/hc/en-us/articles/4409762628114-Using-Z-Wave-devices-with-Homey)**
>
> Homey supports Z-Wave devices manufactured by a wide range of brands. To see if your device is supported, search for an associated app on the Homey App Store.
> Adding Z-Wave devices to Homey
> To bett...

> **[Connecting Z-Wave devices in unsecure mode](https://support.homey.app/hc/en-us/articles/4410500384274-Connecting-Z-Wave-devices-in-unsecure-mode)**
>
> It's possible to connect Homey with some Z-Wave devices in unsecure mode. When adding such device, simply type 00000 as the PIN code.

> **[Common Z-Wave Error messages](https://support.homey.app/hc/en-us/articles/10225734620188-Common-Z-Wave-Error-messages)**
>
> When setting up or migrating to Homey Pro (Early 2023) you might run into some Z-wave related errors. Here we will try to explain what the errors mean and what options you have to try and fix them....

---

<div class="post-metadata">

**Author:** ![Niek\_Hollander](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/niek_hollander/32/81558_2.png) [@Niek\_Hollander](https://community.homey.app/u/Niek_Hollander)\
**Post date:** [February 8, 2024, 6:57pm UTC](https://community.homey.app/t/aerotec-multopose-sensor/101794/3 "2024-02-08T18:57:35Z")

</div>

dat was inderdaad het probleem had de sensor niet dicht genoeg bij de hp23 gehouden.