# Aeotech Heavy duty switch **URL:** \ **Category:** Devices\ **Tags:** z-wave\ **Created:** [August 30, 2018, 9:00am UTC](https://community.homey.app/t/aeotech-heavy-duty-switch/865 "2018-08-30T09:00:26Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![danone](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danone/32/115743_2.png) [@danone](https://community.homey.app/u/danone)\ **Post date:** [November 25, 2018, 11:55am UTC](https://community.homey.app/t/aeotech-heavy-duty-switch/865/6 "2018-11-25T11:55:48Z")
@Simon_Willis Perhaps the developers of the Aeotec app have not included the Australian Product Id for the Heavy Duty Switch, only European Product Id. See this similar topic here regarding the Aeotec Garage Door controller: [Cannot include Aeotec Garage Door Opener - #5 by TedTolboom](https://community.homey.app/t/cannot-include-aeotec-garage-door-opener/648/5) Read it and when you get to this post by @TedTolboom pay attention. > [@Cannot include Aeotec Garage Door Opener](https://community.homey.app/t/cannot-include-aeotec-garage-door-opener/648/5): > > @surges thanks for providing the Node ID… which confirms that indeed the ProductTypeID and Product ID for the AU version are not “supported” (yet) by the Aeotec app… so during inclusion, Homey’s core does not find a app / driver that uses these ID’s… For some devices the AU region ID’s were added after confirmation of @danone that these worked ok. Athom is currently re-writing all their Z-wave apps to become SDK2 compatible. I’ll ask the Athom developer to include all the ID’s to support the … If you follow step by step you will then be able to include it. Then to help Athom to include the AUS Product Id into the next Aeotec app release, make a New Issue on Github here: [https://github.com/athombv/com.aeotec/issues](https://github.com/athombv/com.aeotec/issues) Hope this helps. --- _[View the full topic](https://community.homey.app/t/aeotech-heavy-duty-switch/865)._