# Aeotec ZW116, no power updating in Homey Aeotec App **URL:** \ **Category:** Apps\ **Created:** [May 26, 2020, 12:20pm UTC](https://community.homey.app/t/aeotec-zw116-no-power-updating-in-homey-aeotec-app/30434 "2020-05-26T12:20:10Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 26, 2020, 1:31pm UTC](https://community.homey.app/t/aeotec-zw116-no-power-updating-in-homey-aeotec-app/30434/2 "2020-05-26T13:31:59Z")
> [@Pi\_man](#): > > I looked elsewhere on line and it suggests settings for parameters 101 and 111 but there does not appear to be a way to do this in Homey If parameters are not available in the advanced settings of the device, you can change the missing parameters via raw configuration. More information can be found in this post: > [@Z-Wave Raw Data Format Dev Postal](https://community.homey.app/t/z-wave-raw-data-format-dev-postal/15543/5): > > You need much more “parameters” when sending an configuration parameter, raw data is for all possible z-wave commands, not just parameters (like the expert parameters) which is only 1 of the many possible command classes. Dest Node ID, Command Class, Command Class Function, Value(s). so you should also add the Command Class for CONFIGURATION Command class (112) and the SET Function (4) in your line: 30,112,4,14,1,1 30: Destination Node ID 112: CONFIGURATION Command Class 4: CONFIGURATION S… --- _[View the full topic](https://community.homey.app/t/aeotec-zw116-no-power-updating-in-homey-aeotec-app/30434)._