# Aeotec Nano Switch type configuration for 2-state and momentary press switches

**URL:** <https://community.homey.app/t/aeotec-nano-switch-type-configuration-for-2-state-and-momentary-press-switches/27765>\
**Category:** Questions & Help\
**Tags:** z-wave\
**Created:** [March 31, 2020, 12:00pm UTC](https://community.homey.app/t/aeotec-nano-switch-type-configuration-for-2-state-and-momentary-press-switches/27765 "2020-03-31T12:00:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lachy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lachy/32/23309_2.png) [@Lachy](https://community.homey.app/u/Lachy)\
**Post date:** [March 31, 2020, 12:00pm UTC](https://community.homey.app/t/aeotec-nano-switch-type-configuration-for-2-state-and-momentary-press-switches/27765/1 "2020-03-31T12:00:01Z")

</div>

I recently installed several Aeotec Nano Switches (Dual and Single), along with Clipsal Impress Momentary Bell Press switches (Model 30PBBP). In the Homey app, under Advanced settings for the switch, when I configured the “Switch type for input x” to “Momentary switch”, they did not work correctly. I eventually discovered that with it configured in this way, it was behaving as if they were 2-state switches.

I then discovered that the momentary press switches only work when “Switch type for input x” is set to “2-state switch mode”, and that 2-state switches only work when that setting is set to “Momentary switch”.

I believe these values in the Aeotec app for these switches have been labelled incorrectly.