# Aeotec multisensor only returns 1 parameter - why?

**URL:** <https://community.homey.app/t/aeotec-multisensor-only-returns-1-parameter-why/62411>\
**Category:** Devices\
**Created:** [April 6, 2022, 2:57pm UTC](https://community.homey.app/t/aeotec-multisensor-only-returns-1-parameter-why/62411 "2022-04-06T14:57:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Julian\_Driver](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/julian_driver/32/12699_2.png) [@Julian\_Driver](https://community.homey.app/u/Julian_Driver)\
**Post date:** [April 6, 2022, 2:57pm UTC](https://community.homey.app/t/aeotec-multisensor-only-returns-1-parameter-why/62411/1 "2022-04-06T14:57:08Z")

</div>

I have a multisensor in a flow so that it triggers if the sun is bright and closes some curtains. I want to bring in to the flow the temperature that this will operate, however when I go to the aeotec app for a card I am not given the temperature option, just motion and tamper. Is this right and is there a workaround?

---

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [April 6, 2022, 3:34pm UTC](https://community.homey.app/t/aeotec-multisensor-only-returns-1-parameter-why/62411/2 "2022-04-06T15:34:38Z")

</div>

In the _ **And…** _ section you have to use **Logic** cards and the relevant **Tag** (for the temperature value of the MS).

It’s an older tutorial but just have a look on it, maybe it helps a bit:

> [@How to use tags in a flow](https://community.homey.app/t/how-to-use-tags-in-a-flow/9285):
>
> How to use tags in a flow on 2.0.x There are a lot of questions about using the tags in the 2.0.x firmware of Homey. So here i give you a simple explanation of using tags in 2.0.x. We start with the WHEN part When making a flow you select a device in the WHEN part of the flow. In this example i used a Fibaro plug. When selecting the device you get the option to choose “The power changed” f.e. When clicked you will see the tag(s) coming with this card. We gonna use that tag later, no need in…