# Aeotec multisensor 7 doesn't reset vibration alarm in Homey and motion sensor doesn't seem to work **URL:** \ **Category:** Devices\ **Created:** [July 28, 2026, 3:55pm UTC](https://community.homey.app/t/aeotec-multisensor-7-doesnt-reset-vibration-alarm-in-homey-and-motion-sensor-doesnt-seem-to-work/157661 "2026-07-28T15:55:14Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [July 28, 2026, 5:56pm UTC](https://community.homey.app/t/aeotec-multisensor-7-doesnt-reset-vibration-alarm-in-homey-and-motion-sensor-doesnt-seem-to-work/157661/4 "2026-07-28T17:56:52Z")
It is in the post @Eternity linked to > [@Aeotec multisensor 6 blijft in bewegingsalarm](https://community.homey.app/t/aeotec-multisensor-6-blijft-in-bewegingsalarm/57671/1): > > Update > Deels opgelost. Ik heb de “wake up / reset” knop ingedrukt tot de led geel/oranje werd. Dat werkte bij 1 multi sensor. EN: “_Press “wake up” button until LED indicator turns yellow/orange_” > [@Roel\_Van\_Eyken](#): > > Or a “hard” reset? Holding the start button for 20 seconds in order to revert to factory settings? (I have not tried that yet). > > I was also thinking of removing the batteries and inserting them again after 19 minutes or so, if nothing else works Do both in that order I’d say, when the wake up button procedure didn’t help. --- _[View the full topic](https://community.homey.app/t/aeotec-multisensor-7-doesnt-reset-vibration-alarm-in-homey-and-motion-sensor-doesnt-seem-to-work/157661)._