# Aeotec Multisensor 4 in 1

**URL:** <https://community.homey.app/t/aeotec-multisensor-4-in-1/10183>\
**Category:** Devices\
**Created:** [March 6, 2019, 12:24pm UTC](https://community.homey.app/t/aeotec-multisensor-4-in-1/10183 "2019-03-06T12:24:47Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![gwilliamb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gwilliamb/32/4302_2.png) [@gwilliamb](https://community.homey.app/u/gwilliamb)\
**Post date:** [March 6, 2019, 12:24pm UTC](https://community.homey.app/t/aeotec-multisensor-4-in-1/10183/1 "2019-03-06T12:24:47Z")

</div>

Hi,  
I have one of the above mentioned devices. It is showing that the motion sensor is permanently on ie flashing red “ yes” continuously.  
Question 1: Is there anyway of correcting this without, I gather, having to reset the device?  
2: can it be reset remotely ie through phone or tablet?  
3: What causes this to happen and is there anything that can be done to stop it?  
Thanks  
Glenn

---

<div class="post-metadata">

**Author:** ![Ikon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ikon/32/11729_2.png) [@Ikon](https://community.homey.app/u/Ikon)\
**Post date:** [March 6, 2019, 10:17pm UTC](https://community.homey.app/t/aeotec-multisensor-4-in-1/10183/2 "2019-03-06T22:17:10Z")

</div>

Had the same issue from the get go. Resetet it several times, could’nt get it to work. Returned it asap

---

<div class="post-metadata">

**Author:** ![gwilliamb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gwilliamb/32/4302_2.png) [@gwilliamb](https://community.homey.app/u/gwilliamb)\
**Post date:** [May 9, 2019, 11:56am UTC](https://community.homey.app/t/aeotec-multisensor-4-in-1/10183/3 "2019-05-09T11:56:40Z")

</div>

Now have an Aeotec Multisensor 6 and it is doing exactly the same thing.  
Any ideas?

---

<div class="post-metadata">

**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\
**Post date:** [May 9, 2019, 3:49pm UTC](https://community.homey.app/t/aeotec-multisensor-4-in-1/10183/4 "2019-05-09T15:49:58Z")

</div>

Does it do the same when u hold it close to Homey?

---

<div class="post-metadata">

**Author:** ![gwilliamb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gwilliamb/32/4302_2.png) [@gwilliamb](https://community.homey.app/u/gwilliamb)\
**Post date:** [May 12, 2019, 11:31am UTC](https://community.homey.app/t/aeotec-multisensor-4-in-1/10183/5 "2019-05-12T11:31:48Z")

</div>

Yes it does do the same. I would normally say it is the device which is at fault but having it happened to two different models seems to me it must be something to do with Homey