# Aeotec, adding devices problem (Solved)

**URL:** <https://community.homey.app/t/aeotec-adding-devices-problem-solved/15858>\
**Category:** Apps\
**Created:** [July 21, 2019, 7:04pm UTC](https://community.homey.app/t/aeotec-adding-devices-problem-solved/15858 "2019-07-21T19:04:28Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Paronfesken](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paronfesken/32/1744_2.png) [@Paronfesken](https://community.homey.app/u/Paronfesken)\
**Post date:** [July 21, 2019, 7:04pm UTC](https://community.homey.app/t/aeotec-adding-devices-problem-solved/15858/1 "2019-07-21T19:04:28Z")

</div>

Had a multisensor 6 paired for 6-12 months and it worked I guess(didn’t pay much attention to it). Bought a Aeotec Recessed Door Sensor and tried to add it. Lagged out first time and had to try again. That time it connected fast but got error message “status.already\_added”. Tried multiple times over until i rebooted homey, tried som more with no luck. uninstalled the Aeotec app and reinstalled it. No luck after multiple tries. Just get the error message. Since I reinstalled the app the multisensor 6 got removed, so I tried to add that too, but the same problem here too. “status.already\_added”. Any one know any solution to this? Everyting is the latest version.

---

<div class="post-metadata">

**Author:** ![Osorkon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osorkon/32/43026_2.png) [@Osorkon](https://community.homey.app/u/Osorkon)\
**Post date:** [July 21, 2019, 7:16pm UTC](https://community.homey.app/t/aeotec-adding-devices-problem-solved/15858/2 "2019-07-21T19:16:40Z")

</div>

Exclude the device first before start the Inclusion again.  
More -\> Settings -\> Z-Wave -\> remove any Z-Wave device. Then start the Inclusion/ Exclusion Prozess on the device.

Now you can start the Inclusion again.

---

<div class="post-metadata">

**Author:** ![Paronfesken](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paronfesken/32/1744_2.png) [@Paronfesken](https://community.homey.app/u/Paronfesken)\
**Post date:** [July 21, 2019, 8:42pm UTC](https://community.homey.app/t/aeotec-adding-devices-problem-solved/15858/3 "2019-07-21T20:42:03Z")

</div>

Worked! thank you!

Can I buy you a coffee? PM me your paypal.

---

<div class="post-metadata">

**Author:** ![Osorkon](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/osorkon/32/43026_2.png) [@Osorkon](https://community.homey.app/u/Osorkon)\
**Post date:** [July 22, 2019, 7:32am UTC](https://community.homey.app/t/aeotec-adding-devices-problem-solved/15858/4 "2019-07-22T07:32:49Z")

</div>

You are welcome!  
The service is free.  
It is a community where users helps users. I also benefit from it, if I need help. 😀