# Advance flow suggestions **URL:** \ **Category:** Flows\ **Created:** [February 6, 2025, 7:00pm UTC](https://community.homey.app/t/advance-flow-suggestions/129925 "2025-02-06T19:00:23Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![dsdevries](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dsdevries/32/80220_2.png) [@dsdevries](https://community.homey.app/u/dsdevries)\ **Post date:** [October 14, 2025, 10:14am UTC](https://community.homey.app/t/advance-flow-suggestions/129925/5 "2025-10-14T10:14:08Z")
@LasseRy Did you figured it out yet? I think I would also follow @Rmb ‘s advice and use the Zone Activity App for this. I just wrote a tutorial on how I implemented in my setup with one motion sensor in one zone, but you can easily extend this with multiple sensors and adjust timings. Hope this helps: > [@\[HOW TO\] Gain full control over Zone Activity using Motion Sensors (PIR) and Virtual Motion Triggers](https://community.homey.app/t/advanced-flow-for-full-control-over-zone-activity-using-motion-sensors-pir-and-virtual-motion-triggers/144082): > > Introduction This is not a guide on how to implement a specific use case, but rather a framework that will give you full control over zone activity. Many flows like turning on/off lights could be done much simpler. However, when my personal flows became more complex, I ran into a lot of caveats and quirks that caused me to rethink how I work with motion sensors. I came up with this system which allowed me to solve all the bugs I ran into and I would like to share it with all of you. The problem… --- _[View the full topic](https://community.homey.app/t/advance-flow-suggestions/129925)._