# Adding fibero roller shutter 3 fails in homey **URL:** \ **Category:** Questions & Help\ **Created:** [April 3, 2019, 7:19pm UTC](https://community.homey.app/t/adding-fibero-roller-shutter-3-fails-in-homey/11377 "2019-04-03T19:19:13Z")\ **Posts on this page:** 1\ **Showing post:** 16
**Author:** ![PatrickR](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/patrickr/32/9977_2.png) [@PatrickR](https://community.homey.app/u/PatrickR)\ **Post date:** [May 8, 2019, 11:11pm UTC](https://community.homey.app/t/adding-fibero-roller-shutter-3-fails-in-homey/11377/16 "2019-05-08T23:11:45Z")
Wow! After reading a different thread on a similar issue > [@Fibaro single switch 2, can\`t connect](https://community.homey.app/t/fibaro-single-switch-2-can-t-connect/8708/5): > > Thanks! I have already installed that, and when I go to “Homey” (app) -\> Devices -\> + -\> Fibaro -\> Single Switch 2 -\> Install -\> pushing the button on fibaro 3 times - \> No Z-wave device has been found Have tried this over and over again. But do I need to take the homey device around the house to set up each and every device? and trying different stuff mentioned there it finally worked! Unbelievable 😱. So roughly what I did (maybe helps others or myself for the next switch 😄): - on developer page → zwave → remove any node. Klicking the B button of my RS3 several times. It felt like it didn’t do anything, but who knows. - Plug in Homey with an extension court so that i could hold it in my arm, next to (~15cm) the RS3, while doing the further steps: - In Homey App: Add device → Homey (not Fibaro) → Zwave → Install. Then 5-time quick click of B Button, further random clicks. → No device found. - repeat the above using Fibaro device → not found. - repeat again using Homey → Zwave. 5-time Click, wait, 5-time click, wait almost until timeout, 3-time click → „wait while device is adding“ (or similar). Yupiiie! 🎉 - Perform calibration using Homey app, worked fine! I must say those last 3 clicks almost never happened. In my head I was already retouring the RS3s to Amazon… Really strange/random/frustrating procedure, I hope I will succeed 2 more times… --- _[View the full topic](https://community.homey.app/t/adding-fibero-roller-shutter-3-fails-in-homey/11377)._