# Activate flows using Fibaro Switch 2 scene activation

**URL:** <https://community.homey.app/t/activate-flows-using-fibaro-switch-2-scene-activation/2680>\
**Category:** Questions & Help\
**Created:** [October 10, 2018, 7:34pm UTC](https://community.homey.app/t/activate-flows-using-fibaro-switch-2-scene-activation/2680 "2018-10-10T19:34:11Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![danone](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danone/32/115743_2.png) [@danone](https://community.homey.app/u/danone)\
**Post date:** [October 12, 2018, 10:16am UTC](https://community.homey.app/t/activate-flows-using-fibaro-switch-2-scene-activation/2680/4 "2018-10-12T10:16:52Z")

</div>

Looking at the manual, the scenes are disabled by default.

 ![57%20pm](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/2/27f707ddc9cb7972491a88a6c09f7851068eecae.png)

Maybe try enable the scenes by writing raw values on parameters 28 and/or 29.  
In your case for S1 double click, you need to write value 2 on parameter 28 (of size 1 byte according with the manual).

 ![14%20pm](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/f/f856fd4b1fe66f96bd0b522f9a2b205a28a42baf.png)

So you should write 28,1,2 (parameter number,size,value) Then hit Save Settings.

---

_[View the full topic](https://community.homey.app/t/activate-flows-using-fibaro-switch-2-scene-activation/2680)._