# Ability to set "Advanced Settings" using flows

**URL:** <https://community.homey.app/t/ability-to-set-advanced-settings-using-flows/64632>\
**Category:** Ideas & Suggestions\
**Created:** [June 12, 2022, 8:56am UTC](https://community.homey.app/t/ability-to-set-advanced-settings-using-flows/64632 "2022-06-12T08:56:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Strauman](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/strauman/32/33981_2.png) [@Strauman](https://community.homey.app/u/Strauman)\
**Post date:** [June 12, 2022, 8:56am UTC](https://community.homey.app/t/ability-to-set-advanced-settings-using-flows/64632/1 "2022-06-12T08:56:02Z")

</div>

I’d love to be able to change the config params under a device’s “advanced settings” in flows. Are there obvious reasons as to why this is not possible?

---

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [June 12, 2022, 9:02am UTC](https://community.homey.app/t/ability-to-set-advanced-settings-using-flows/64632/2 "2022-06-12T09:02:38Z")

</div>

For Z-Wave devices it is possible:

_ **Then…** _  
– Add card → Z-Wave → Send raw command

But this only makes sense for mainpower-operated devices. Battery-powered devices must be woken up manually before a configuration change.

---

<div class="post-metadata">

**Author:** ![Strauman](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/strauman/32/33981_2.png) [@Strauman](https://community.homey.app/u/Strauman)\
**Post date:** [June 12, 2022, 9:35am UTC](https://community.homey.app/t/ability-to-set-advanced-settings-using-flows/64632/3 "2022-06-12T09:35:22Z")

</div>

Ah. But I was thinking about zigbee also.