# \[Abandoned\] deCONZ **URL:** \ **Category:** Apps\ **Tags:** app, zigbee, devices\ **Created:** [May 5, 2020, 9:57am UTC](https://community.homey.app/t/abandoned-deconz/29390 "2020-05-05T09:57:44Z")\ **Posts on this page:** 20\ **Page:** 9
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 18, 2020, 5:10pm UTC](https://community.homey.app/t/abandoned-deconz/29390/163 "2020-07-18T17:10:15Z")
Hmmm… haven’t been changing a lot on my config lately but all of a sudden some sensors are starting to die. Out of nothing they are not reachable. If I remove them and readd, they’re working fine again. Anyone else have these same problems? ---
**Author:** ![Jeff1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeff1/32/16576_2.png) [@Jeff1](https://community.homey.app/u/Jeff1)\ **Post date:** [July 18, 2020, 6:49pm UTC](https://community.homey.app/t/abandoned-deconz/29390/164 "2020-07-18T18:49:38Z")
I have nearly the whole range of Aqara, a lot Hue motion sensors and some Ikea stuff. 100% are reachable. Have you checked if they are reachable in Phoscon or used the Deconz gui? ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 18, 2020, 8:01pm UTC](https://community.homey.app/t/abandoned-deconz/29390/165 "2020-07-18T20:01:50Z")
In phoscon they we’re unreachable too. Don’t know what happened but three range extenders we’re unreachable as well. Two of them I just did a powercycle and they started working again. One refused to work, after a powercycle it gave the impression it worked but after rebooting deconz docker image it didn’t. So after a while I decided I’d remove it and readd, after that, the sensors started working again too. ---
**Author:** ![MadMonkey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madmonkey/32/22606_2.png) [@MadMonkey](https://community.homey.app/u/MadMonkey)\ **Post date:** [July 20, 2020, 5:49am UTC](https://community.homey.app/t/abandoned-deconz/29390/166 "2020-07-20T05:49:00Z")
Hey @Jeff1 Thx for the details, that’s exactly what I need to support the device. Will be supported soon;) ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 20, 2020, 9:49am UTC](https://community.homey.app/t/abandoned-deconz/29390/167 "2020-07-20T09:49:25Z")
@MadMonkey your .1 release solved it for me. If I now hit the test button it shows all info! Great work. ---
**Author:** ![Jeff1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeff1/32/16576_2.png) [@Jeff1](https://community.homey.app/u/Jeff1)\ **Post date:** [July 20, 2020, 6:31pm UTC](https://community.homey.app/t/abandoned-deconz/29390/168 "2020-07-20T18:31:07Z")
Hey @MadMonkey thanks for the support. If you need additional info. I am happy to help you. ---
**Author:** ![Jeff1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeff1/32/16576_2.png) [@Jeff1](https://community.homey.app/u/Jeff1)\ **Post date:** [July 20, 2020, 6:57pm UTC](https://community.homey.app/t/abandoned-deconz/29390/169 "2020-07-20T18:57:25Z")
@Martijn_Hoogenbosch I use the Deconz gui to check the network quality of my routers. Here I can see how many connections each routers has. Most routers have like 9 green lines to other routers, so their are a lot of back up routes and they work stable. If they are no so many lines or yellow or red lines then I add an additional router. My personal experience with around 30 Xiaomi routers is that a lot of sensors via Deconz connect to a IKEA reapeter or IKEA powerplugs. In my setup even Hue motions sensors connect to Ikea routers instead of a Hue powerplug. Only don’t know how to use GUI in Docker. I have a PI4 with deconz locally installed so I have Deconz and Phoscon together. I use Docker only for Home Assistant to run in Homey unsupported devices,for example IR (Broadlink mini 4) ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 20, 2020, 7:19pm UTC](https://community.homey.app/t/abandoned-deconz/29390/170 "2020-07-20T19:19:39Z")
Yes I know. If you add the container with macvlan driver it get’s it own IP address, so I can VNC to the container without problems. I already have a couple of routers, but if they start failing one after another then that’s a problem. Don’t know why or what happend, it now works great again. Did not add the repeaters to Homey so I didn’t see it. Now I have. And Yes, maybe i should add some additional repeaters. The thing is I don’t want to ‘see’ them, very much want to hide them out of sight, and don’t have that much room. ---
**Author:** ![rafi](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rafi/32/4052_2.png) [@rafi](https://community.homey.app/u/rafi)\ **Post date:** [July 23, 2020, 11:06am UTC](https://community.homey.app/t/abandoned-deconz/29390/171 "2020-07-23T11:06:05Z")
I just installed ConBee2 on Raspberry Pi using deCONZ image. The discovery doesn’t work at all. Getting ‘Error:Unable to find a deCONZ gateway’. I can connect ok to Phoscon App via web interface and was able to add some sensors that work ok. I also tried the manual configuration but stuck with getting an API. I was following the instructions on dresden-elektronik github and when using Postman with GET [https://dresden-light.appspot.com/discover](https://dresden-light.appspot.com/discover) returns only this - . Any one could help, please? ---
**Author:** ![Eternity](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eternity/32/102113_2.png) [@Eternity](https://community.homey.app/u/Eternity)\ **Post date:** [July 23, 2020, 11:10am UTC](https://community.homey.app/t/abandoned-deconz/29390/172 "2020-07-23T11:10:03Z")
I finally got a new Synology that can run Docker. I have installed the DeConz container (marthoc/deconz:latest) , but need some help getting it running. Unfortunately I can’t find a tutorial to setup the DeConz container. Read thru this tread, but I can’t figure it out. Sorry… (for instance, do I need to do this: SSH to the nas and run 2 commands to load the drivers for the Conbee: sudo insmod /lib/modules/usbserial.ko sudo insmod /lib/modules/ftdi\_sio.ko) Could some kind soul please describe the next steps and best setting to get it up and running, to find my DeConz 2 stick and being seen in the Homey DeConz App? Perhaps not relevant, but I host some websites on my Synology and have ‘Web Station’ running. Port 80 is not available. Thanks! ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [July 23, 2020, 11:40am UTC](https://community.homey.app/t/abandoned-deconz/29390/173 "2020-07-23T11:40:27Z")
How far did you get following the instructions on [https://hub.docker.com/r/marthoc/deconz](https://hub.docker.com/r/marthoc/deconz)? ---
**Author:** ![Eternity](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eternity/32/102113_2.png) [@Eternity](https://community.homey.app/u/Eternity)\ **Post date:** [July 23, 2020, 11:59am UTC](https://community.homey.app/t/abandoned-deconz/29390/174 "2020-07-23T11:59:11Z")
Robert to the rescue 🙂 I was not sure if I needed to do the steps listed under **Pre-requisite** , but it was simply a matter of running the container in Docker… I now understand that I have to do this 😉 In that case I will also need to change the ports from 80/443 to other values; I need 80 for Web Station. Or, will this work? ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [July 23, 2020, 12:14pm UTC](https://community.homey.app/t/abandoned-deconz/29390/175 "2020-07-23T12:14:15Z")
> [@Eternity](#): > > Or, will this work? No, if they are already in use by another process you can’t reuse them. Alternatively, you can use a different network driver (search for `macvlan` on the forum) which would give the container its own IP-address, which would allow you to keep using 80/443. That will (probably) also work better with discovery. ---
**Author:** ![Eternity](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eternity/32/102113_2.png) [@Eternity](https://community.homey.app/u/Eternity)\ **Post date:** [July 23, 2020, 12:15pm UTC](https://community.homey.app/t/abandoned-deconz/29390/176 "2020-07-23T12:15:31Z")
Will do so Robert. Thanks! If I run sudo usermod -a -G dialout $USER Do I replace USER with a Synology user name? ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [July 23, 2020, 12:28pm UTC](https://community.homey.app/t/abandoned-deconz/29390/177 "2020-07-23T12:28:19Z")
No, just leave as-is. ---
**Author:** ![Eternity](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eternity/32/102113_2.png) [@Eternity](https://community.homey.app/u/Eternity)\ **Post date:** [July 23, 2020, 12:29pm UTC](https://community.homey.app/t/abandoned-deconz/29390/178 "2020-07-23T12:29:59Z")
Gives an error. Tried with USERS too (with an S): ![Schermafbeelding 2020-07-23 om 14.26.09](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/3/635156a50083e24dfc69c6248a2b11d4bd9e5ece.png) I guess it all is a bit more complicated than anticipated… ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [July 23, 2020, 12:31pm UTC](https://community.homey.app/t/abandoned-deconz/29390/179 "2020-07-23T12:31:49Z")
Perhaps that instruction doesn’t apply to Synology, I can’t remember. ---
**Author:** ![Eternity](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eternity/32/102113_2.png) [@Eternity](https://community.homey.app/u/Eternity)\ **Post date:** [July 23, 2020, 12:32pm UTC](https://community.homey.app/t/abandoned-deconz/29390/180 "2020-07-23T12:32:45Z")
I will just carry on with the rest of the steps. Thanks for pointing me in the right direction (again) ! ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [July 23, 2020, 12:38pm UTC](https://community.homey.app/t/abandoned-deconz/29390/181 "2020-07-23T12:38:02Z")
I had the same problem. Plug the ConBee II USB stick into a different port. Also type the command line {“devicetype”: “homey”} by hand, not copy/past! With this I got the ConBee II Stick working, but not via the GUI interface of the Raspberry but via web browser on my MacBook. Because I can’t access the GUI on the Raspberry, I can’t do any maintenance or control it with the deCONZ software. And the guys here in this post don’t seem to use Raspberry. Dresden Elektronik is not helpful either. All in all I am not satisfied with the stick. ---
**Author:** ![Eternity](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/eternity/32/102113_2.png) [@Eternity](https://community.homey.app/u/Eternity)\ **Post date:** [July 23, 2020, 12:41pm UTC](https://community.homey.app/t/abandoned-deconz/29390/182 "2020-07-23T12:41:27Z")
Thanks @DirkG Fed up for now. I will try again later this weekend! [Previous page](https://community.homey.app/t/abandoned-deconz/29390.md?page=8) [Next page](https://community.homey.app/t/abandoned-deconz/29390.md?page=10)