# \[Abandoned\] deCONZ **URL:** \ **Category:** Apps\ **Tags:** app, zigbee, devices\ **Created:** [May 5, 2020, 9:57am UTC](https://community.homey.app/t/abandoned-deconz/29390 "2020-05-05T09:57:44Z")\ **Posts on this page:** 20\ **Page:** 8
**Author:** ![MadMonkey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madmonkey/32/22606_2.png) [@MadMonkey](https://community.homey.app/u/MadMonkey)\ **Post date:** [July 3, 2020, 8:22pm UTC](https://community.homey.app/t/abandoned-deconz/29390/143 "2020-07-03T20:22:36Z")
It was reported as a github issue that this event is actually not supported by the device and this is also what I’ve seen in the deconz community. You actually get events from the device for this gesture?? ---
**Author:** ![Seinuh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/seinuh/32/16357_2.png) [@Seinuh](https://community.homey.app/u/Seinuh)\ **Post date:** [July 4, 2020, 3:17am UTC](https://community.homey.app/t/abandoned-deconz/29390/144 "2020-07-04T03:17:09Z")
I always use this events \*dim down single press \*dim down button held \*dim up single press \*dim up button held It works always for me, so it was before you change it a “4 button” switch ---
**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\ **Post date:** [July 4, 2020, 5:48am UTC](https://community.homey.app/t/abandoned-deconz/29390/145 "2020-07-04T05:48:03Z")
My square dimmer emits these events: - single press up (1002) - single press down (2002) - long press up start (1001) - long press up release (1003) - long press down start (2001) - long press down release (2003) ---
**Author:** ![MadMonkey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madmonkey/32/22606_2.png) [@MadMonkey](https://community.homey.app/u/MadMonkey)\ **Post date:** [July 4, 2020, 1:19pm UTC](https://community.homey.app/t/abandoned-deconz/29390/146 "2020-07-04T13:19:15Z")
My bad, I’ll create a hotfix then. No need to change anything, it will work again in the next few days;) ---
**Author:** ![Seinuh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/seinuh/32/16357_2.png) [@Seinuh](https://community.homey.app/u/Seinuh)\ **Post date:** [July 7, 2020, 4:16pm UTC](https://community.homey.app/t/abandoned-deconz/29390/147 "2020-07-07T16:16:08Z")
Solved thanks ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 12, 2020, 5:12pm UTC](https://community.homey.app/t/abandoned-deconz/29390/148 "2020-07-12T17:12:58Z")
To what port does the test version check to “test”, and to get the config data? Because it’s not working for me, the app itself is. ---
**Author:** ![MadMonkey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madmonkey/32/22606_2.png) [@MadMonkey](https://community.homey.app/u/MadMonkey)\ **Post date:** [July 12, 2020, 5:25pm UTC](https://community.homey.app/t/abandoned-deconz/29390/149 "2020-07-12T17:25:45Z")
It uses exactly the same settings that are used for the communication. Can you try the following: - ensure the config is correct, click save to be sure - go to the support page and click reload, does that work? ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 12, 2020, 5:46pm UTC](https://community.homey.app/t/abandoned-deconz/29390/150 "2020-07-12T17:46:18Z")
Config is correct, because it works ;-), on support page reload results in ‘error’ and the about page does not give any info at all. Auto detect doesn’t work either btw… that’s probably because if I do a GET to [https://dresden-light.appspot.com/discover](https://dresden-light.appspot.com/discover) i’m getting [] as return. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [July 12, 2020, 7:50pm UTC](https://community.homey.app/t/abandoned-deconz/29390/151 "2020-07-12T19:50:39Z")
> [@Martijn\_Hoogenbosch](#): > > i’m getting as return. I had the same problem today. I spent all last week getting the ConBee II to run. Try a different USB port. Maybe it can also be caused by the extension cable (if in use). ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 12, 2020, 9:42pm UTC](https://community.homey.app/t/abandoned-deconz/29390/152 "2020-07-12T21:42:40Z")
Uw but deconz just works , so does the stick. ---
**Author:** ![MadMonkey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madmonkey/32/22606_2.png) [@MadMonkey](https://community.homey.app/u/MadMonkey)\ **Post date:** [July 13, 2020, 6:10am UTC](https://community.homey.app/t/abandoned-deconz/29390/153 "2020-07-13T06:10:34Z")
Very strange, this has nothing to do with [https://dresden-light.appspot.com/discover](https://dresden-light.appspot.com/discover) responding with an empty array. The “Test” button really only loads the state and nothing else. Were you in the same wlan as your homey and deconz when you tried it? ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 13, 2020, 8:12am UTC](https://community.homey.app/t/abandoned-deconz/29390/154 "2020-07-13T08:12:41Z")
Yes, same network. deCONZ not WLAN obviously but same network never the less. It keeps saying ‘unable to connect to the gateway, please check the configuration’. Is there something I can check for you? I don’t have any firewalling at all. What I did change recently was the IP address of deCONZ, and changed it in the deCONZ app. Maybe there still is a reference to the old IP? That reminds me. After changing the IP address into the new one, all sensors worked immediately. The HUE light bulb didn’t. When turning it on it gave an error saying it could not be reached by the old IP. After rebooting homey (not just the app) it worked again. ---
**Author:** ![MadMonkey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madmonkey/32/22606_2.png) [@MadMonkey](https://community.homey.app/u/MadMonkey)\ **Post date:** [July 13, 2020, 11:10am UTC](https://community.homey.app/t/abandoned-deconz/29390/155 "2020-07-13T11:10:11Z")
Maybe your ip adress ans ws port are correct, but the port not? That would explain why you get push updates ut everything outside won’t work ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 13, 2020, 11:47am UTC](https://community.homey.app/t/abandoned-deconz/29390/156 "2020-07-13T11:47:39Z")
Don’t think so, because I can browse to it with any browser. And: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/4/a4c01140d970474b4cdfac2be76b0969f8e481d0.png) ---
**Author:** ![MadMonkey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madmonkey/32/22606_2.png) [@MadMonkey](https://community.homey.app/u/MadMonkey)\ **Post date:** [July 13, 2020, 6:39pm UTC](https://community.homey.app/t/abandoned-deconz/29390/157 "2020-07-13T18:39:51Z")
The test button basically does nothing else than loading http://[ip]:[port]/api/[key]. Can you load this from a browser? ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 14, 2020, 8:07am UTC](https://community.homey.app/t/abandoned-deconz/29390/158 "2020-07-14T08:07:36Z")
It runs on the default port 80. So when I type your URL it is [http://deconz.lan/api/KEY](http://deconz.lan/api/KEY) it results in lots a lots of info starting with" `{"config":{"UTC":"2020-07-14T08:04:43","apiversion":"1.16.0","backup":{"errorcode":0,"status":"idle"},"bridgeid":"00212EFFFF05ACF2","datastoreversion":"60","devicename":"ConBee II","dhcp":true,"factorynew":false,"fwversion":"0x26580700","gateway":"192.168.0.1","internetservices":` Seems to be correct, right? ---
**Author:** ![MadMonkey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madmonkey/32/22606_2.png) [@MadMonkey](https://community.homey.app/u/MadMonkey)\ **Post date:** [July 14, 2020, 3:51pm UTC](https://community.homey.app/t/abandoned-deconz/29390/159 "2020-07-14T15:51:47Z")
This result looks fine, I could imagine however that for some reason your phone might not reslve deconz.lan properly or that the request is not allowed (are you using an iphone)? The good part is that you seem to have not a real problem as only the test fails? Btw: the next update will ensure that all the communication goes trough the homey. So currently the test call gets performed from your phone and in the future it will be performed directly by home and the result is sent to the phone ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 14, 2020, 3:56pm UTC](https://community.homey.app/t/abandoned-deconz/29390/160 "2020-07-14T15:56:32Z")
No, no problems here, so yes, that’s fine. The deconz.lan is my internal network and is getting resolved fine by my iphone. I can get the same result on my iphone, so it does seem a bit weird. Looking forward to the next update! ---
**Author:** ![Jeff1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jeff1/32/16576_2.png) [@Jeff1](https://community.homey.app/u/Jeff1)\ **Post date:** [July 18, 2020, 8:34am UTC](https://community.homey.app/t/abandoned-deconz/29390/161 "2020-07-18T08:34:41Z")
I just received the Aqara Opple Zigbee 3.0, 6 button switch. Each button has 1x press, 2x press and press and hold. So a total of 18 devices/scenes that can be controlled from a 13 euro device. Only the thing is it appears it behaves a little bit different in Deconz. I was wondering if it is technically possible to add to Homey? This is what I read/found so far: - Supported in Deconz en Home Assistant - I can not control it from within Phoscon - It makes 1 JSON entrie in rest-api/lights }, “76”: { “config”: { “battery”: 100, “on”: true, “reachable”: true }, “ep”: 1, “etag”: “4965543e9f1b83fcd495b97XXXXXXXX”, “lastseen”: “2020-07-18T08:09:26.213”, “manufacturername”: “LUMI”, “mode”: 1, “modelid”: “lumi.remote.b686opcn01”, “name”: “OPPLE switch 3-gang”, “state”: { “buttonevent”: 1002, “lastupdated”: “2020-07-18T08:09:26.213” }, “swversion”: “20190730”, “type”: “ZHASwitch”, “uniqueid”: “04:cf:8c:df:3c:xx:xx:xx-01-0012” }, If I listen in Home Assistent for deconz\_event I get the following: { “event\_type”: “deconz\_event”, “data”: { “id”: “opple\_switch\_3\_gang”, “unique\_id”: “04:cf:8c:df:3c:XX:XX:XX”, “event”: 1002 }, “origin”: “LOCAL”, “time\_fired”: “2020-07-18T08:09:26.219320+00:00”, “context”: { “id”: “94b776afedfa419d8e80e25XXXX”, “parent\_id”: null, “user\_id”: null } } - “event” for botton 1 are: Single press 1002, Double press 1004, Press and Hold: Press 1001, Release 1003. - For each button is this the same only the first number changes so: 2002, 3002, 4002 etc. ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [July 18, 2020, 11:47am UTC](https://community.homey.app/t/abandoned-deconz/29390/162 "2020-07-18T11:47:59Z")
Mine were send back to China. Now again underway to me. Hopefully they will work. [Previous page](https://community.homey.app/t/abandoned-deconz/29390.md?page=7) [Next page](https://community.homey.app/t/abandoned-deconz/29390.md?page=9)